Hi,
I cannot believe I forgot to add the f71808e to Documentation/f71882fg
(note I did faithfully add the f71889ed and the f71869, when adding
support for them, in the same patch set ?!).
Acked-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Regards,
Hans
On 03/24/2011 08:30 AM, Jean Delvare wrote:
Hi Guenter,
On Wed, 23 Mar 2011 20:38:16 -0700, Guenter Roeck wrote:
On Wed, Mar 23, 2011 at 04:50:04PM -0400, Jean Delvare wrote:
The list of supported devices was not always well documented in all
places. Clarify and list all devices in documentation, Kconfig and
the driver itself.
Signed-off-by: Jean Delvare<khali@xxxxxxxxxxxx>
Cc: Hans de Goede<hdegoede@xxxxxxxxxx>
---
Documentation/hwmon/f71882fg | 11 +++++++++++
drivers/hwmon/Kconfig | 14 +++++++++++---
drivers/hwmon/f71882fg.c | 2 +-
3 files changed, 23 insertions(+), 4 deletions(-)
[ ... ]
config SENSORS_F71882FG
- tristate "Fintek F71858FG, F71862FG, F71882FG, F71889FG and F8000"
+ tristate "Fintek F71882FG and compatibles"
help
If you say yes here you get support for hardware monitoring
- features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG,
- F71889FG and F8000 Super-I/O chips.
+ features of many Fintek Super-I/O (LPC) chips. The currently
+ supported chips are:
+ F71808E
+ F71858FG
+ F71862FG and F71863FG
+ F71869F and F71869E
+ F71882FG and F71883FG
+ F71889FG and F81801U
+ F71889ED
+ F8000
Why not just a simple list ? The grouping seems to be a bit arbitrary unless one knows
that the "and" chip IDs are the same - but users won't usually know that.
Thanks for the review(s). Does the following look better?
From: Jean Delvare<khali@xxxxxxxxxxxx>
Subject: hwmon: (f71882fg) Document all supported devices
The list of supported devices was not always well documented in all
places. Clarify and list all devices in documentation, Kconfig and
the driver itself.
Signed-off-by: Jean Delvare<khali@xxxxxxxxxxxx>
Cc: Hans de Goede<hdegoede@xxxxxxxxxx>
Acked-by: Guenter Roeck<guenter.roeck@xxxxxxxxxxxx>
---
Documentation/hwmon/f71882fg | 11 +++++++++++
drivers/hwmon/Kconfig | 16 +++++++++++++---
drivers/hwmon/f71882fg.c | 2 +-
3 files changed, 25 insertions(+), 4 deletions(-)
--- linux-2.6.39-rc0.orig/Documentation/hwmon/f71882fg 2011-03-24 08:15:35.000000000 +0100
+++ linux-2.6.39-rc0/Documentation/hwmon/f71882fg 2011-03-24 08:15:44.000000000 +0100
@@ -2,6 +2,10 @@ Kernel driver f71882fg
======================
Supported chips:
+ * Fintek F71808E
+ Prefix: 'f71808e'
+ Addresses scanned: none, address read from Super I/O config space
+ Datasheet: Not public
* Fintek F71858FG
Prefix: 'f71858fg'
Addresses scanned: none, address read from Super I/O config space
@@ -30,6 +34,13 @@ Supported chips:
Prefix: 'f8000'
Addresses scanned: none, address read from Super I/O config space
Datasheet: Not public
+ * Fintek F81801U
+ Prefix: 'f71889fg'
+ Addresses scanned: none, address read from Super I/O config space
+ Datasheet: Not public
+ Note: This is the 64-pin variant of the F71889FG, they have the
+ same device ID and are fully compatible as far as hardware
+ monitoring is concerned.
Author: Hans de Goede<hdegoede@xxxxxxxxxx>
--- linux-2.6.39-rc0.orig/drivers/hwmon/Kconfig 2011-03-24 08:15:35.000000000 +0100
+++ linux-2.6.39-rc0/drivers/hwmon/Kconfig 2011-03-24 08:16:44.000000000 +0100
@@ -315,11 +315,21 @@ config SENSORS_F71805F
will be called f71805f.
config SENSORS_F71882FG
- tristate "Fintek F71858FG, F71862FG, F71882FG, F71889FG and F8000"
+ tristate "Fintek F71882FG and compatibles"
help
If you say yes here you get support for hardware monitoring
- features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG,
- F71889FG and F8000 Super-I/O chips.
+ features of many Fintek Super-I/O (LPC) chips. The currently
+ supported chips are:
+ F71808E
+ F71858FG
+ F71862FG
+ F71863FG
+ F71869F/E
+ F71882FG
+ F71883FG
+ F71889FG/ED
+ F8000
+ F81801U
This driver can also be built as a module. If so, the module
will be called f71882fg.
--- linux-2.6.39-rc0.orig/drivers/hwmon/f71882fg.c 2011-03-24 08:15:40.000000000 +0100
+++ linux-2.6.39-rc0/drivers/hwmon/f71882fg.c 2011-03-24 08:15:44.000000000 +0100
@@ -114,7 +114,7 @@ static const char *f71882fg_names[] = {
"f71862fg",
"f71869", /* Both f71869f and f71869e, reg. compatible and same id */
"f71882fg",
- "f71889fg",
+ "f71889fg", /* f81801u too, same id */
"f71889ed",
"f8000",
};
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
