On Thu, Mar 10, 2011 at 06:53:28AM -0500, Guenter Roeck wrote: [ ... ] > > > > So first question is what chip he has. > > > ... answer is NCT6775F, from Robert's log. It uses the "old" registers for the min > speed settings, so presumably that should be correct. Yet, there must be a reason > for the alarm. Maybe it is the "maximum RPM" register after all - the NCT6775F > has that set of registers as well. > Doesn't look like the "maximum RPM" register is the culprit. I have a system with NCT6775F (not using its fan controls, though). Looks like one can not write into that register, so it must be a status register. Maybe it reports the maximum RPM the chip has seen. Guenter _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
