Dear friends, I'd like to have your advice on how to get the GPU temperature for my graphics card. My system: motherboard: Asus CUSL2 graphics card: Asus agp-v8200 deluxe OS: Ubuntu 9.10 (Karmic) kernel 2.6.31-14 acpi_enforce_resources=lax option activated in grub The final output of sensors-detect is: Driver `w83781d': * Bus `NVIDIA i2c adapter ' Busdriver `nvidia', I2C address 0x2d (and 0x48 0x49) Chip `Winbond W83781D' (confidence: 8) * Bus `SMBus I801 adapter at e800' Busdriver `i2c_i801', I2C address 0x2d (and 0x48 0x49) Chip `Asus AS99127F (rev.1)' (confidence: 8) After modprobe for all mentioned drivers "sensors" gives me: administrator@UBUNTU:~$ sensors as99127f-i2c-3-2d Adapter: SMBus I801 adapter at e800 in0: +1.68 V (min = +1.46 V, max = +1.84 V) in1: +1.68 V (min = +2.24 V, max = +2.74 V) ALARM in2: +3.44 V (min = +2.96 V, max = +3.62 V) in3: +2.91 V (min = +2.67 V, max = +3.26 V) in4: +2.98 V (min = +2.40 V, max = +3.58 V) in5: +3.01 V (min = +2.42 V, max = +3.62 V) in6: +4.08 V (min = +2.66 V, max = +3.98 V) ALARM fan1: 0 RPM (min = 0 RPM, div = 2) fan2: 0 RPM (min = 0 RPM, div = 2) fan3: 0 RPM (min = 0 RPM, div = 2) temp1: +34.0°C (high = +105.0°C, hyst = +0.0°C) temp2: +24.0°C (high = +100.0°C, hyst = +92.0°C) temp3: -31.5°C (high = +122.0°C, hyst = +121.0°C) cpu0_vid: +1.650 V beep_enable:enabled So, there is no GPU temperature listing. I have recommended nvidia driver installed (nvidia-96-kernel). Playing with nvidia-settings I have: --------------- administrator@UBUNTU:~$ nvidia-settings -q gpucoretemp -t administrator@UBUNTU:~$ --------------- administrator@UBUNTU:~$ nvidia-settings -q gpucoretemp administrator@UBUNTU:~$ --------------- administrator@UBUNTU:~$ nvidia-settings -e gpucoretemp Attribute 'GPUCoreTemp': - Attribute is not written to the rc file. Reports the current core temperature in Celsius of the GPU driving the X screen. administrator@UBUNTU:~$ --------------- Nothing. nvclock -T outputs: administrator@UBUNTU:~$ sudo nvclock -T [sudo] password for administrator: Error: temperature monitoring isn't supported on your videocard. administrator@UBUNTU:~$ I know for sure that my graphics card does have a thermal control chip; in Windows using Asus SmartDoctor software I can get temperature not only for GPU, but also for GRAM. So, is there any way to enable temperature monitoring for agp-v8200 in ubuntu? |
_______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors