On Sun, Feb 27, 2011 at 08:03:07PM -0500, Samuel Ortiz wrote: > Hi Keerthy, > > On Thu, Feb 24, 2011 at 08:48:50PM +0530, Keerthy wrote: > > This driver exposes the sysfs nodes of the TWL4030 MADC module. > > All the voltage channel values are expressed in terms of mV. Channel 13 > > and channel 14 are reserved. There are channels which represent > > temperature and current the output is represented by celcius > > and mA respectively. > It would make sense for me to carry both patches through the MFD tree, but > I'd like to get Guenter's ACK before pushing it upstream. > Main problem I have with the hwmon part is the sensor index value and how it maps to adc channels. Specifically, channels 13 and 14 are listed as reserved, yet index value 13 is used without further explanation as bit map value passed on to twl4030_madc_conversion() to obtain the value for channel 15. Either this is wrong, or it asks for a detailed explanation. I didn't have time to track down which one it is. And even if it isn't wrong, it doesn't seem to be the right thing to do since it adds a lot of confusion. Guenter _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
