On 09/01/2010 09:30 AM, Mahmood Naderan wrote:
Here is what I did: mahmood@localhost:~$ <mailto:mahmood@localhost:~$> svn checkout http://lm-sensors.org/svn/lm-sensors/trunk lm-sensors ... Checked out revision 5857.
Yes
mahmood@localhost:~$ <mailto:mahmood@blackfish:~$> svn update http://lm-sensors.org/svn/lm-sensors/trunk lm-sensors Skipped 'http://lm-sensors.org/svn/lm-sensors/trunk' At revision 5857. Summary of conflicts: Skipped paths: 1 Is that what you meant? *// Naderan *Mahmood;*
just svn update # not needed if you have fresh checkout in lm-sensors/prog/detect run sensors-detect and it should find your core-i7
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--
*From:* Nikola Pajkovsky <npajkovs@xxxxxxxxxx> *To:* lm-sensors@xxxxxxxxxxxxxx *Sent:* Wed, September 1, 2010 11:49:03 AM *Subject:* Re: lmsensors doesn't detect core-i7 sensors On 09/01/2010 08:38 AM, Mahmood Naderan wrote: > Dear all, > > I ran sensors-detect to detect Core-i7 temperatures but it doesn't show them. Here is the output of sensors-detect: > > > mahmood@localhost:~$ sudo sensors-detect > # sensors-detect revision 5818 (2010-01-18 17:22:07 +0100) > # System: Gigabyte Technology Co., Ltd. P55-USB3 > > This program will help you determine which kernel modules you need > to load to use lm_sensors most effectively. It is generally safe > and recommended to accept the default answers to all questions, > unless you know what you're doing. > > Some south bridges, CPUs or memory controllers contain embedded sensors. > Do you want to scan for them? This is totally safe. (YES/no): y > Silicon Integrated Systems SIS5595... No > VIA VT82C686 Integrated Sensors... No > VIA VT8231 Integrated Sensors... No > AMD K8 thermal sensors... No > AMD Family 10h thermal sensors... No > AMD Family 11h thermal sensors... No > Intel Core family thermal sensor... No > Intel Atom thermal sensor... No > Intel AMB FB-DIMM thermal sensor... No > VIA C7 thermal sensor... No > VIA Nano thermal sensor... No > > Some Super I/O chips contain embedded sensors. We have to write to > standard I/O ports to probe them. This is usually safe. > Do you want to scan for Super I/O sensors? (YES/no): y > Probing for Super-I/O at 0x2e/0x2f > Trying family `National Semiconductor'... No > Trying family `SMSC'... No > Trying family `VIA/Winbond/Nuvoton/Fintek'... No > Trying family `ITE'... Yes > Found `ITE IT8720F Super IO Sensors' Success! > (address 0x290, driver `it87') > Probing for Super-I/O at 0x4e/0x4f > Trying family `National Semiconductor'... No > Trying family `SMSC'... No > Trying family `VIA/Winbond/Nuvoton/Fintek'... No > Trying family `ITE'... No > > Some systems (mainly servers) implement IPMI, a set of common interfaces > through which system health data may be retrieved, amongst other things. > We first try to get the information from SMBIOS. If we don't find it > there, we have to read from arbitrary I/O ports to probe for such > interfaces. This is normally safe. Do you want to scan for IPMI > interfaces? (YES/no): y > Probing for `IPMI BMC KCS' at 0xca0... No > Probing for `IPMI BMC SMIC' at 0xca8... No > > Some hardware monitoring chips are accessible through the ISA I/O ports. > We have to write to arbitrary I/O ports to probe them. This is usually > safe though. Yes, you do have ISA I/O ports even if you do not have any > ISA slots! Do you want to scan the ISA I/O ports? (yes/NO): y > Probing for `National Semiconductor LM78' at 0x290... No > Probing for `National Semiconductor LM79' at 0x290... No > Probing for `Winbond W83781D' at 0x290... No > Probing for `Winbond W83782D' at 0x290... No > > Lastly, we can probe the I2C/SMBus adapters for connected hardware > monitoring devices. This is the most risky part, and while it works > reasonably well on most systems, it has been reported to cause trouble > on some systems. > Do you want to probe the I2C/SMBus adapters now? (YES/no): y > Found unknown SMBus adapter 8086:3b30 at 0000:00:1f.3. > Sorry, no supported PCI bus adapters found. > Module i2c-dev loaded successfully. > > Now follows a summary of the probes I have just done. > Just press ENTER to continue: > > Driver `it87': > * ISA bus, address 0x290 > Chip `ITE IT8720F Super IO Sensors' (confidence: 9) > > To load everything that is needed, add this to /etc/modules: > #----cut here---- > # Chip drivers > it87 > #----cut here---- > If you have some drivers built into your kernel, the list above will > contain too many modules. Skip the appropriate ones! > > Do you want to add these lines automatically to /etc/modules? (yes/NO)yes > Successful! > > Monitoring programs won't work until the needed modules are > loaded. You may want to run '/etc/init.d/module-init-tools start' > to load them. > > Unloading i2c-dev... OK > > > Then I ran sensors: > > mahmood@localhost:~$ sudo sensors > it8720-isa-0290 > Adapter: ISA adapter > in0: +0.86 V (min = +0.00 V, max = +4.08 V) > in1: +1.58 V (min = +0.00 V, max = +4.08 V) > in2: +3.39 V (min = +0.00 V, max = +4.08 V) > in3: +3.02 V (min = +0.00 V, max = +4.08 V) > in4: +0.05 V (min = +0.00 V, max = +4.08 V) ALARM > in5: +3.12 V (min = +0.00 V, max = +4.08 V) > in6: +0.02 V (min = +0.00 V, max = +4.08 V) ALARM > in7: +2.16 V (min = +0.00 V, max = +4.08 V) > Vbat: +3.10 V > fan1: 1679 RPM (min = 10 RPM) > fan2: 644 RPM (min = 0 RPM) > fan3: 1278 RPM (min = 10 RPM) > fan4: 1205 RPM (min = 0 RPM) > temp1: +36.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor > temp2: +25.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor > temp3: +33.0°C (low = +127.0°C, high = +90.0°C) sensor = thermistor > cpu0_vid: +0.313 V > > > What can I do then? currently I have kubuntu 10.04 > > *// Naderan *Mahmood;* > > Pick sensors-detect from svn or file bug against lm-sensors in ubuntu and maintainer(if he is nice) update lm-sensors.
_______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors