On Sun, 29 Aug 2010 05:58:19 -0700, Glen wrote: > Jean, > > Sorry for the late response. I based this off of a file called > sensors-Gigabyte-965P-DS3.conf taken from here: > > http://khali.linux-fr.org/devel/lm-sensors/sensors-Gigabyte-965P-DS3.conf > > I found the reference here: > > http://www.lm-sensors.org/ticket/2273 > > > Sorry about the date, and not correcting the comment about scaling, > although I have to admit, scaling in0 is dubious. I did it to make the > lm-sensor readings match the BIOS readings, but the BIOS reading is > somewhat high for an Athlon II X2 245 which should be 0.85 to 1.425 V > from the specs I can find on the web. Thanks for also pointing out the > errors in setting the temp limits, I did bang this one out rather > quickly. Plus, I'm still not sure exactly sure what components the > temps are really reading. > > I've attached an updated file. I updated the wiki, thank you! -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
