Signed-off-by: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
---
The main rationale for this cleanup is to prepare the driver for adding max6696
support.
drivers/hwmon/lm90.c | 110 +++++++++++++++++++++++++++++++++----------------
1 files changed, 74 insertions(+), 36 deletions(-)
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 760ef72..58a5605 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -387,8 +387,13 @@ static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr,
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct i2c_client *client = to_i2c_client(dev);
struct lm90_data *data = i2c_get_clientdata(client);
- long val = simple_strtol(buf, NULL, 10);
int nr = attr->index;
+ long val;
+ int err;
+
+ err = strict_strtol(buf, 10, &val);
+ if (err < 0)
+ return err;
/* +16 degrees offset for temp2 for the LM99 */
if (data->kind == lm99 && attr->index == 3)
@@ -442,8 +447,13 @@ static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr,
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct i2c_client *client = to_i2c_client(dev);
struct lm90_data *data = i2c_get_clientdata(client);
- long val = simple_strtol(buf, NULL, 10);
int nr = attr->index;
+ long val;
+ int err;
+
+ err = strict_strtol(buf, 10, &val);
+ if (err < 0)
+ return err;
/* +16 degrees offset for temp2 for the LM99 */
if (data->kind == lm99 && attr->index <= 2)
@@ -469,7 +479,8 @@ static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr,
return count;
}
-static ssize_t show_temphyst(struct device *dev, struct device_attribute *devattr,
+static ssize_t show_temphyst(struct device *dev,
+ struct device_attribute *devattr,
char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
@@ -495,9 +506,14 @@ static ssize_t set_temphyst(struct device *dev, struct device_attribute *dummy,
{
struct i2c_client *client = to_i2c_client(dev);
struct lm90_data *data = i2c_get_clientdata(client);
- long val = simple_strtol(buf, NULL, 10);
+ long val;
+ int err;
int temp;
+ err = strict_strtol(buf, 10, &val);
+ if (err < 0)
+ return err;
+
mutex_lock(&data->update_lock);
if (data->kind == adt7461)
temp = temp_from_u8_adt7461(data, data->temp8[2]);
@@ -600,7 +616,12 @@ static ssize_t set_pec(struct device *dev, struct device_attribute *dummy,
const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
- long val = simple_strtol(buf, NULL, 10);
+ long val;
+ int err;
+
+ err = strict_strtol(buf, 10, &val);
+ if (err < 0)
+ return err;
switch (val) {
case 0:
@@ -622,8 +643,10 @@ static DEVICE_ATTR(pec, S_IWUSR | S_IRUGO, show_pec, set_pec);
* Real code
*/
-/* The ADM1032 supports PEC but not on write byte transactions, so we need
- to explicitly ask for a transaction without PEC. */
+/*
+ * The ADM1032 supports PEC but not on write byte transactions, so we need
+ * to explicitly ask for a transaction without PEC.
+ */
static inline s32 adm1032_write_byte(struct i2c_client *client, u8 value)
{
return i2c_smbus_xfer(client->adapter, client->addr,
@@ -631,20 +654,22 @@ static inline s32 adm1032_write_byte(struct i2c_client *client, u8 value)
I2C_SMBUS_WRITE, value, I2C_SMBUS_BYTE, NULL);
}
-/* It is assumed that client->update_lock is held (unless we are in
- detection or initialization steps). This matters when PEC is enabled,
- because we don't want the address pointer to change between the write
- byte and the read byte transactions. */
-static int lm90_read_reg(struct i2c_client* client, u8 reg, u8 *value)
+/*
+ * It is assumed that client->update_lock is held (unless we are in
+ * detection or initialization steps). This matters when PEC is enabled,
+ * because we don't want the address pointer to change between the write
+ * byte and the read byte transactions.
+ */
+static int lm90_read_reg(struct i2c_client *client, u8 reg, u8 *value)
{
int err;
- if (client->flags & I2C_CLIENT_PEC) {
- err = adm1032_write_byte(client, reg);
- if (err >= 0)
- err = i2c_smbus_read_byte(client);
- } else
- err = i2c_smbus_read_byte_data(client, reg);
+ if (client->flags & I2C_CLIENT_PEC) {
+ err = adm1032_write_byte(client, reg);
+ if (err >= 0)
+ err = i2c_smbus_read_byte(client);
+ } else
+ err = i2c_smbus_read_byte_data(client, reg);
if (err < 0) {
dev_warn(&client->dev, "Register %#02x read failed (%d)\n",
@@ -669,14 +694,21 @@ static int lm90_detect(struct i2c_client *new_client,
return -ENODEV;
/* detection and identification */
- if ((man_id = i2c_smbus_read_byte_data(new_client,
- LM90_REG_R_MAN_ID)) < 0
- || (chip_id = i2c_smbus_read_byte_data(new_client,
- LM90_REG_R_CHIP_ID)) < 0
- || (reg_config1 = i2c_smbus_read_byte_data(new_client,
- LM90_REG_R_CONFIG1)) < 0
- || (reg_convrate = i2c_smbus_read_byte_data(new_client,
- LM90_REG_R_CONVRATE)) < 0)
+ man_id = i2c_smbus_read_byte_data(new_client, LM90_REG_R_MAN_ID);
+ if (man_id < 0)
+ return -ENODEV;
+
+ chip_id = i2c_smbus_read_byte_data(new_client, LM90_REG_R_CHIP_ID);
+ if (chip_id < 0)
+ return -ENODEV;
+
+ reg_config1 = i2c_smbus_read_byte_data(new_client, LM90_REG_R_CONFIG1);
+ if (reg_config1 < 0)
+ return -ENODEV;
+
+ reg_convrate = i2c_smbus_read_byte_data(new_client,
+ LM90_REG_R_CONVRATE);
+ if (reg_convrate < 0)
return -ENODEV;
if ((address == 0x4C || address == 0x4D)
@@ -826,16 +858,18 @@ static int lm90_probe(struct i2c_client *new_client,
lm90_init_client(new_client);
/* Register sysfs hooks */
- if ((err = sysfs_create_group(&new_client->dev.kobj, &lm90_group)))
+ err = sysfs_create_group(&new_client->dev.kobj, &lm90_group);
+ if (err)
goto exit_free;
if (new_client->flags & I2C_CLIENT_PEC) {
- if ((err = device_create_file(&new_client->dev,
- &dev_attr_pec)))
+ err = device_create_file(&new_client->dev, &dev_attr_pec);
+ if (err)
goto exit_remove_files;
}
if (data->kind != max6657 && data->kind != max6646) {
- if ((err = device_create_file(&new_client->dev,
- &sensor_dev_attr_temp2_offset.dev_attr)))
+ err = device_create_file(&new_client->dev,
+ &sensor_dev_attr_temp2_offset.dev_attr);
+ if (err)
goto exit_remove_files;
}
@@ -883,9 +917,8 @@ static void lm90_init_client(struct i2c_client *client)
* 0.125 degree resolution) and range (0x08, extend range
* to -64 degree) mode for the remote temperature sensor.
*/
- if (data->kind == max6680) {
+ if (data->kind == max6680)
config |= 0x18;
- }
config &= 0xBF; /* run */
if (config != data->config_orig) /* Only write if changed */
@@ -961,9 +994,14 @@ static int lm90_read16(struct i2c_client *client, u8 regh, u8 regl, u16 *value)
* we have to read the low byte again, and now we believe we have a
* correct reading.
*/
- if ((err = lm90_read_reg(client, regh, &oldh))
- || (err = lm90_read_reg(client, regl, &l))
- || (err = lm90_read_reg(client, regh, &newh)))
+ err = lm90_read_reg(client, regh, &oldh);
+ if (err)
+ return err;
+ err = lm90_read_reg(client, regl, &l);
+ if (err)
+ return err;
+ err = lm90_read_reg(client, regh, &newh);
+ if (err)
return err;
if (oldh != newh) {
err = lm90_read_reg(client, regl, &l);
--
1.7.0.87.g0901d
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
