On Sun, Jul 18, 2010 at 08:02:52AM -0400, Tobias Preclik wrote: > Hi, > > my Zotac board H55-ITX features the W83667HG-B chip. I downloaded and > compiled the standalone kernel module today. Here's the sensors output: > > The module loads fine: > > # modprobe w83627ehf > # tail -n 1 /var/log/messages > Jul 18 13:42:58 leela kernel: [50378.028634] w83627ehf: Found W83667HG-B > chip at 0xa10 > # sensors > w83667hg-isa-0a10 > Adapter: ISA adapter > in0: +0.98 V (min = +0.00 V, max = +1.74 V) > in1: +1.11 V (min = +0.10 V, max = +0.20 V) ALARM > in2: +3.36 V (min = +3.95 V, max = +3.28 V) ALARM > in3: +3.36 V (min = +1.57 V, max = +2.10 V) ALARM > in4: +1.10 V (min = +1.74 V, max = +1.87 V) ALARM > in5: +1.18 V (min = +1.02 V, max = +1.30 V) > in7: +3.28 V (min = +3.23 V, max = +2.62 V) ALARM > in8: +3.34 V (min = +3.18 V, max = +0.05 V) ALARM > fan1: 0 RPM (min = 3515 RPM, div = 128) ALARM > fan2: 1022 RPM (min = 1638 RPM, div = 8) ALARM > fan3: 0 RPM (min = 958 RPM, div = 128) ALARM > fan4: 0 RPM (min = 10546 RPM, div = 128) ALARM > fan5: 0 RPM (min = 3515 RPM, div = 128) ALARM > temp1: +30.0°C (high = -56.0°C, hyst = -17.0°C) ALARM sensor = > thermistor > temp2: +41.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor > temp3: -3.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor > cpu0_vid: +0.000 V > Actual values look mostly good, but the limits are really off. Difficult to say, though, if those are wrong readings or just badly configured. Jean, any idea/thoughts ? Guenter _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
