On Fri, 25 Jun 2010 15:13:55 +0100, Another Sillyname wrote: > On 25 June 2010 13:29, Jean Delvare <khali@xxxxxxxxxxxx> wrote: > > On Fri, 25 Jun 2010 13:07:27 +0100, Another Sillyname wrote: > >> I have 3 of these motherboards including one on a Win 7/Fedora 13 dual boot. > >> > >> What would you like to know? > > > > Nothing actually. It would have been needed if the BIOS wasn't > > displaying the +12V value, but as it turns out that it does, we'll just > > use that as our comparison point. > > > > Thanks for the proposal anyway! > > > > -- > > Jean Delvare > > > > No Problem > > If it helps I'm running mine off 300w PSU's and have NVidia GT220 > cards installed, the NVidia temps are detected. > > it8720-isa-0a10 > Adapter: ISA adapter > in0: +0.85 V (min = +4.08 V, max = +4.08 V) ALARM > in1: +1.09 V (min = +4.08 V, max = +4.08 V) ALARM > in2: +3.41 V (min = +4.08 V, max = +4.08 V) ALARM > in3: +3.04 V (min = +4.08 V, max = +4.08 V) ALARM > in4: +2.99 V (min = +4.08 V, max = +4.08 V) ALARM > in5: +1.81 V (min = +4.08 V, max = +4.08 V) ALARM > in6: +1.50 V (min = +4.08 V, max = +4.08 V) ALARM > in7: +2.96 V (min = +4.08 V, max = +4.08 V) ALARM > Vbat: +3.34 V > fan1: 0 RPM (min = 0 RPM) > fan2: 1019 RPM (min = 0 RPM) > fan3: 2393 RPM (min = 0 RPM) > temp1: +44.0°C (low = -1.0°C, high = -1.0°C) sensor = thermistor > temp2: +39.0°C (low = -1.0°C, high = -1.0°C) sensor = thermistor > temp3: +29.0°C (low = -1.0°C, high = -1.0°C) sensor = disabled > cpu0_vid: +0.513 V Feel free to use Lars configuration file: http://www.eso.org/~llundin/sff/sensors.conf You'll get a much better output. -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
