Hi Steve,
On Sun, 6 Jun 2010 18:32:12 +0100, Steve Glendinning wrote:
> This patch allows the sensors-detect script to detect the SMSC
> EMC2103 family of temperature sensors and fan controllers.
>
> Signed-off-by: Steve Glendinning <steve.glendinning@xxxxxxxx>
> ---
> prog/detect/sensors-detect | 10 +++++++++-
> 1 files changed, 9 insertions(+), 1 deletions(-)
>
> diff --git a/prog/detect/sensors-detect b/prog/detect/sensors-detect
> index e7f5ab2..9ffaf98 100755
> --- a/prog/detect/sensors-detect
> +++ b/prog/detect/sensors-detect
> @@ -1130,6 +1130,11 @@ use vars qw(@i2c_adapter_names);
> i2c_addrs => [0x2c..0x2e],
> i2c_detect => sub { dme1737_detect(@_, 2); },
> }, {
> + name => "SMSC EMC2103",
> + driver => "emc2103",
> + i2c_addrs => [0x2e],
> + i2c_detect => sub { emc1403_detect(@_, 2); },
> + }, {
> name => "Fintek F75121R/F75122R/RG (VID+GPIO)",
> driver => "to-be-written",
> i2c_addrs => [0x4e], # 0x37 not probed
> @@ -5143,7 +5148,7 @@ sub fintek_detect
> return 7;
> }
>
> -# Chip to detect: 0 = EMC1403, 1 = EMC1404
> +# Chip to detect: 0 = EMC1403, 1 = EMC1404, 2 = EMC2103
> # Registers used:
> # 0xfd: Device ID register
> # 0xfe: Vendor ID register
> @@ -5163,6 +5168,9 @@ sub emc1403_detect
> } elsif ($chip == 1) {
> return unless $dev_id == 0x25;
> return unless $rev == 0x01;
> + } elsif ($chip == 2) {
> + return unless ($dev_id == 0x24) || ($dev_id == 0x26);
> + return unless $rev == 0x01;
> }
>
> return 6;
Patch applied, thanks.
--
Jean Delvare
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
