On 05/25/10 13:12, Datta, Shubhrajyoti wrote:
>
> Adds the driver support for the TMP105 temperature sensor device. The
> interface is I2C.The driver supports the read of the temperature values.
>
Still on the wrong list... cc'ing lm-sensors...
Please check MAINTAINERS for the correct mailing list for patches.
> Signed-off-by: Shubhrajyoti D <shubhrajyoti@xxxxxx>
Acked-by: Jonathan Cameron <jic23@xxxxxxxxx>
> ---
> drivers/hwmon/Kconfig | 3 ++-
> drivers/hwmon/lm75.c | 2 ++
> 2 files changed, 4 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index a4a5352..7a137d5 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -483,7 +483,8 @@ config SENSORS_LM75
> - NXP's LM75A
> - ST Microelectronics STDS75
> - TelCom (now Microchip) TCN75
> - - Texas Instruments TMP100, TMP101, TMP75, TMP175, TMP275
> + - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
> + TMP275
>
> This driver supports driver model based binding through board
> specific I2C device tables.
> diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
> index 8ae2cfe..5646342 100644
> --- a/drivers/hwmon/lm75.c
> +++ b/drivers/hwmon/lm75.c
> @@ -46,6 +46,7 @@ enum lm75_type { /* keep sorted in alphabetical order */
> tcn75,
> tmp100,
> tmp101,
> + tmp105,
> tmp175,
> tmp275,
> tmp75,
> @@ -220,6 +221,7 @@ static const struct i2c_device_id lm75_ids[] = {
> { "tcn75", tcn75, },
> { "tmp100", tmp100, },
> { "tmp101", tmp101, },
> + { "tmp105", tmp105, },
> { "tmp175", tmp175, },
> { "tmp275", tmp275, },
> { "tmp75", tmp75, },
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
