Adds the driver support for the TMP105 temperature sensor device. The
interface is I2C.The driver supports the read of the temperature values.
Signed-off-by: Shubhrajyoti D <shubhrajyoti@xxxxxx>
Acked-by: Jonathan Cameron <jic23@xxxxxxxxx>
---
drivers/hwmon/Kconfig | 3 ++-
drivers/hwmon/lm75.c | 2 ++
2 files changed, 4 insertions(+), 1 deletions(-)
mode change 100644 => 100755 drivers/hwmon/Kconfig
mode change 100644 => 100755 drivers/hwmon/lm75.c
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
old mode 100644
new mode 100755
index 6a9ac75..5c915e5
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -492,7 +492,8 @@ config SENSORS_LM75
- NXP's LM75A
- ST Microelectronics STDS75
- TelCom (now Microchip) TCN75
- - Texas Instruments TMP100, TMP101, TMP75, TMP175, TMP275
+ - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
+ TMP275
This driver supports driver model based binding through board
specific I2C device tables.
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
old mode 100644
new mode 100755
index 8ae2cfe..5646342
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -46,6 +46,7 @@ enum lm75_type { /* keep sorted in alphabetical order */
tcn75,
tmp100,
tmp101,
+ tmp105,
tmp175,
tmp275,
tmp75,
@@ -220,6 +221,7 @@ static const struct i2c_device_id lm75_ids[] = {
{ "tcn75", tcn75, },
{ "tmp100", tmp100, },
{ "tmp101", tmp101, },
+ { "tmp105", tmp105, },
{ "tmp175", tmp175, },
{ "tmp275", tmp275, },
{ "tmp75", tmp75, },
--
1.5.4.7
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
