On Tue, Mar 30, 2010 at 03:18:34PM -0700, Ira W. Snyder wrote: > On Wed, Sep 02, 2009 at 11:33:22AM -0700, Ira W. Snyder wrote: > > On Tue, Jun 30, 2009 at 11:39:18AM -0700, Ira Snyder wrote: > > > The ADM1030/ADM1031 chips have temperature offset registers, for both the > > > local and remote temperature sensors. Following the example set forth in > > > the LM90/ADM1032 driver, expose the offset registers to userspace. > > > > > > Signed-off-by: Ira W. Snyder <iws@xxxxxxxxxxxxxxxx> > > > --- > > > > > > I have tested this with an adm1031 chip, and I see the offsets as > > > expected. I do not have any other compatible chips to test with, however > > > I read the adm1030 datasheet, and everything should work fine. > > > > > > On the adm1031, the datasheet claims the offset registers can be used to > > > add/subtract 15 degC from the temperature reading. I have found that it > > > is actually possible to add 15 degC and subtract 16 degC. Following the > > > data sheet, I clamped the value to +- 15 degC, just in case other chips > > > are not compatible. > > > > > > drivers/hwmon/adm1031.c | 40 ++++++++++++++++++++++++++++++++++++++++ > > > 1 files changed, 40 insertions(+), 0 deletions(-) > > > > > > > Any comments on this? Can it be merged for 2.6.32? > > > > Again, any comments on this? I haven't heard anything since it was > posted. > Whoops, I must have missed when this was picked up. I apologize for the extra mailing list traffic. Sorry. Ira _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
