On Tue, Jun 30, 2009 at 11:39:18AM -0700, Ira Snyder wrote: > The ADM1030/ADM1031 chips have temperature offset registers, for both the > local and remote temperature sensors. Following the example set forth in > the LM90/ADM1032 driver, expose the offset registers to userspace. > > Signed-off-by: Ira W. Snyder <iws@xxxxxxxxxxxxxxxx> > --- > > I have tested this with an adm1031 chip, and I see the offsets as > expected. I do not have any other compatible chips to test with, however > I read the adm1030 datasheet, and everything should work fine. > > On the adm1031, the datasheet claims the offset registers can be used to > add/subtract 15 degC from the temperature reading. I have found that it > is actually possible to add 15 degC and subtract 16 degC. Following the > data sheet, I clamped the value to +- 15 degC, just in case other chips > are not compatible. > > drivers/hwmon/adm1031.c | 40 ++++++++++++++++++++++++++++++++++++++++ > 1 files changed, 40 insertions(+), 0 deletions(-) > Any comments on this? Can it be merged for 2.6.32? Thanks, Ira _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
