On Wed, Jan 27, 2010 at 9:16 PM, Reinhard Nissl <rnissl@xxxxxx> wrote: > Hi, > > Am 24.01.2010 11:37, schrieb Reinhard Nissl: > >> what can I do to make it report the real fan speed like shown in >> the BIOS? > > I'm sorry for consuming resources, because the fan speed wasn't > reported in the BIOS either. I recalled that it showed up last > time I was in BIOS but I didn't check it before posting, as the > fan was rotating. > > The problem was, that fan voltage was too low and as a result the > board didn't recognize the level of the generated RPM signal. > Increasing fan supply voltage fixed the issue. Ok, no problem :-) Your board is nonetheless interesting because it has both the interfaces available (and both seems to be working). If you could check the exact spelling of the labels in the BIOS it might help me to better understand how the interface is selected. E.g. does the BIOS display "CPU Fan Speed" or "CPU FAN Speed"? thanks, Luca _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
