This adds a driver for the internal temperature sensor of AMD Family 10h and 11h CPUs. Signed-off-by: Clemens Ladisch <clemens@xxxxxxxxxx> --- v3: added 'force' parameter for CPUs with buggy sensor; more documentation Documentation/hwmon/k10temp | 57 ++++++++++++ drivers/hwmon/Kconfig | 12 ++ drivers/hwmon/Makefile | 1 drivers/hwmon/k10temp.c | 142 ++++++++++++++++++++++++++++++++ 4 files changed, 212 insertions(+) --- /dev/null +++ linux-2.6/Documentation/hwmon/k10temp @@ -0,0 +1,57 @@ +Kernel driver k10temp +===================== + +Supported chips: +* AMD Family 10h processors: + Socket F: Quad-Core/Six-Core/Embedded Opteron + Socket AM2+: Opteron, Phenom (II) X3/X4 + Socket AM3: Quad-Core Opteron, Athlon/Phenom II X2/X3/X4, Sempron II + Socket S1G3: Athlon II, Sempron, Turion II +* AMD Family 11h processors: + Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra) + + Prefix: 'k10temp' + Addresses scanned: PCI space + Datasheets: + BIOS and Kernel Developer's Guide (BKDG) For AMD Family 10h Processors: + http://support.amd.com/us/Processor_TechDocs/31116.pdf + BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors: + http://support.amd.com/us/Processor_TechDocs/41256.pdf + Revision Guide for AMD Family 10h Processors: + http://support.amd.com/us/Processor_TechDocs/41322.pdf + Revision Guide for AMD Family 11h Processors: + http://support.amd.com/us/Processor_TechDocs/41788.pdf + AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks: + http://support.amd.com/us/Processor_TechDocs/43373.pdf + AMD Family 10h Server and Workstation Processor Power and Thermal Data Sheet: + http://support.amd.com/us/Processor_TechDocs/43374.pdf + AMD Family 10h Desktop Processor Power and Thermal Data Sheet: + http://support.amd.com/us/Processor_TechDocs/43375.pdf + +Author: Clemens Ladisch <clemens@xxxxxxxxxx> + +Description +----------- + +This driver permits reading of the internal temperature sensor of AMD +Family 10h and 11h processors. + +All these processors have a sensor, but on older revisions of Family 10h +processors, the sensor may return inconsistent values (erratum 319). The +driver will refuse to load on these revisions unless you specify the +"force=1" module parameter. + +There is one temperature value, available as temp1_input in sysfs. It is +measured in degrees Celsius with a resolution of 1/8th degree. Please note +that it is defined as a relative value; to quote the AMD manual: + + Tctl is the processor temperatur control value, used by the platform to + control cooling systems. Tctl is a non-physical temperature on an + arbitrary scale measured in degrees. It does _not_ represent an actual + physical temperature like die or case temperature. Instead, it specifies + the processor temperature relative to the point at which the system must + supply the maximum cooling for the processor's specified maximum case + temperature and maximum thermal power dissipation. + +The maximum value for Tctl is defined as 70 degrees, so, as a rule of thumb, +this value should not exceed 60 degrees. --- linux-2.6/drivers/hwmon/Kconfig +++ linux-2.6/drivers/hwmon/Kconfig @@ -222,6 +222,18 @@ config SENSORS_K8TEMP This driver can also be built as a module. If so, the module will be called k8temp. +config SENSORS_K10TEMP + tristate "AMD Phenom/Sempron/Turion/Opteron temperature sensor" + depends on X86 && PCI + help + If you say yes here you get support for the temperature + sensor(s) inside your CPU. Supported are later revisions of + the AMD Family 10h and all revisions of the AMD Family 11h + microarchitectures. + + This driver can also be built as a module. If so, the module + will be called k10temp. + config SENSORS_AMS tristate "Apple Motion Sensor driver" depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL --- linux-2.6/drivers/hwmon/Makefile +++ linux-2.6/drivers/hwmon/Makefile @@ -53,6 +53,7 @@ obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o obj-$(CONFIG_SENSORS_IT87) += it87.o obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o +obj-$(CONFIG_SENSORS_K10TEMP) += k10temp.o obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o hp_accel.o obj-$(CONFIG_SENSORS_LIS3_SPI) += lis3lv02d.o lis3lv02d_spi.o obj-$(CONFIG_SENSORS_LM63) += lm63.o --- /dev/null +++ linux-2.6/drivers/hwmon/k10temp.c @@ -0,0 +1,142 @@ +/* + * k10temp.c - AMD Family 10h/11h processor hardware monitoring + * + * Copyright (c) 2009 Clemens Ladisch <clemens@xxxxxxxxxx> + * + * + * This driver is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License; either + * version 2 of the License, or (at your option) any later version. + * + * This driver is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this driver; if not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/err.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <asm/processor.h> + +MODULE_DESCRIPTION("AMD Family 10h/11h CPU core temperature monitor"); +MODULE_AUTHOR("Clemens Ladisch <clemens@xxxxxxxxxx>"); +MODULE_LICENSE("GPL"); + +static bool force; +module_param(force, bool, 0444); +MODULE_PARM_DESC(force, "force loading on processors with erratum 319"); + +#define REG_REPORTED_TEMPERATURE 0xa4 +#define CURTMP_TO_MILLIDEGREES(regval) (((regval) >> 21) * 125) + +static ssize_t show_temp(struct device *dev, + struct device_attribute *attr, char *buf) +{ + u32 regval; + + pci_read_config_dword(to_pci_dev(dev), + REG_REPORTED_TEMPERATURE, ®val); + return sprintf(buf, "%u\n", CURTMP_TO_MILLIDEGREES(regval)); +} + +static ssize_t show_name(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "k10temp\n"); +} + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); +static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); + +static bool __devinit has_erratum_319(void) +{ + /* + * Erratum 319: The thermal sensor of older Family 10h processors + * (B steppings) may be unreliable. + */ + return boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model <= 2; +} + +static int __devinit k10temp_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct device *hwmon_dev; + int err; + + if (has_erratum_319() && !force) { + dev_err(&pdev->dev, + "unreliable CPU thermal sensor; monitoring disabled\n"); + err = -ENODEV; + goto exit; + } + + err = device_create_file(&pdev->dev, + &sensor_dev_attr_temp1_input.dev_attr); + if (err) + goto exit; + + err = device_create_file(&pdev->dev, &dev_attr_name); + if (err) + goto exit_remove1; + + hwmon_dev = hwmon_device_register(&pdev->dev); + if (IS_ERR(hwmon_dev)) { + err = PTR_ERR(hwmon_dev); + goto exit_remove2; + } + dev_set_drvdata(&pdev->dev, hwmon_dev); + + if (has_erratum_319() && force) + dev_warn(&pdev->dev, + "unreliable CPU thermal sensor; check erratum 319\n"); + return 0; + +exit_remove2: + device_remove_file(&pdev->dev, &dev_attr_name); +exit_remove1: + device_remove_file(&pdev->dev, &sensor_dev_attr_temp1_input.dev_attr); +exit: + return err; +} + +static void __devexit k10temp_remove(struct pci_dev *pdev) +{ + hwmon_device_unregister(dev_get_drvdata(&pdev->dev)); + device_remove_file(&pdev->dev, &dev_attr_name); + device_remove_file(&pdev->dev, &sensor_dev_attr_temp1_input.dev_attr); + dev_set_drvdata(&pdev->dev, NULL); +} + +static struct pci_device_id k10temp_id_table[] = { + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) }, + {} +}; +MODULE_DEVICE_TABLE(pci, k10temp_id_table); + +static struct pci_driver k10temp_driver = { + .name = "k10temp", + .id_table = k10temp_id_table, + .probe = k10temp_probe, + .remove = __devexit_p(k10temp_remove), +}; + +static int __init k10temp_init(void) +{ + return pci_register_driver(&k10temp_driver); +} + +static void __exit k10temp_exit(void) +{ + pci_unregister_driver(&k10temp_driver); +} + +module_init(k10temp_init) +module_exit(k10temp_exit) _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
