Re: pwmconfig can only control fan speed at beginning and fancontrol won't work

[Allen Edwards <allen.p.edwards@xxxxxxxxx>]

lm-sensors 3.0.0, kernel 2.6.24.23-generic  Pardon my stupidity but I do not know hot to find a version of hwmon.

Allen

On Sat, Nov 21, 2009 at 7:49 AM, Jean Delvare <khali@xxxxxxxxxxxx> wrote:

On Sat, 21 Nov 2009 07:19:01 -0800, Allen Edwards wrote:
> I searched back several months of your archives and can't find anything
> relevant to my problem.  When I run pwmconfig it finds my fans and controls
> the speeds. I can run a characterization of fan speeds vs settings and find
> that 180 is a good speed noise wise.  It is definitely controlling the fan
> speed.  But when it gets to the part about finding the min and max stall
> speeds, it will not control the fan speed, the fan just stays at full speed.
>  And, of course, fancontrol will not work.  This seems very strange to me.
>  The fan is 3 wire and I have tried it in both a 3 and 4 wire controllable
> header.

And you are using lm-sensors version...? Kernel version...? Hwmon
drivers...?

--
Jean Delvare

_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors