On Mon, Oct 5, 2009 at 2:11 AM, Brad Campbell <brad@xxxxxxxxxxx> wrote: > Luca Tettamanti wrote: >> On Sun, Sep 20, 2009 at 10:20 AM, wixor <wixorpeek@xxxxxxxxx> wrote: >>> I have also discovered that dsdt contains description of what is >>> connected to each it87 input. Maybe it has also some code to access >>> the chip? In /proc/acpi I can read only one temperature, while the >>> chip measures three temperatures, fan speeds and voltages. This is >>> desktop pc with ASUS A8N1-E maniboard, athlon64 and nforce4 chipset. >> >> Try the asus_atk0110 driver, it handles the ACPI hwmon interface on >> Asus motherboards. If it does not work then please send a dump of your >> DSDT (/sys/firmware/acpi/tables/DSDT). > > Vanilla Kernel 2.6.31.1 fails to load it87 on my machine with the same > messages as posted above. > > [71916.534278] it87: Found IT8716F chip at 0x290, revision 0 > [71916.535783] it87: in3 is VCC (+5V) > [71916.537239] it87: in7 is VCCH (+5V Stand-By) > [71916.538763] ACPI: I/O resource it87 [0x295-0x296] conflicts with ACPI > region IP__ [0x295-0x296] > [71916.540365] ACPI: Device needs an ACPI driver > > In addition, asus_atk0110 loads but leaves no trace in dmesg when loaded. That's good ;-) The driver is quiet when everything is ok. You should see the corresponding entries under /sys/class/hwmon/hwmonN; upgrade lm-sensor package to version 3.1.1, older versions do not support ACPI devices. > Motherboard is an Asus M2N32-WS. DSDT attached. >From a quick glance it should work. If it doesn't enable CONFIG_HWMON_DEBUG_CHIP. Luca _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
