On Sun, Sep 20, 2009 at 10:20 AM, wixor <wixorpeek@xxxxxxxxx> wrote: > Hello, > with recent upgrade to 2.6.31 I get > > it87: Found IT8712F chip at 0x290, revision 7 > it87: in3 is VCC (+5V) > it87: in7 is VCCH (+5V Stand-By) > ACPI: I/O resource it87 [0x295-0x296] conflicts with ACPI region IP__ > [0x295-0x296] > ACPI: Device needs an ACPI driver > FATAL: Error inserting it87 > (/lib/modules/2.6.31/kernel/drivers/hwmon/it87.ko): Device or resource > busy [...] > I have also discovered that dsdt contains description of what is > connected to each it87 input. Maybe it has also some code to access > the chip? In /proc/acpi I can read only one temperature, while the > chip measures three temperatures, fan speeds and voltages. This is > desktop pc with ASUS A8N1-E maniboard, athlon64 and nforce4 chipset. Try the asus_atk0110 driver, it handles the ACPI hwmon interface on Asus motherboards. If it does not work then please send a dump of your DSDT (/sys/firmware/acpi/tables/DSDT). Luca _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
