On Sun, Sep 20, 2009 at 10:37 PM, Gene Heskett <gene.heskett@xxxxxxxxxxx> wrote: > On Sunday 20 September 2009, Luca Tettamanti wrote: >>On Sun, Sep 20, 2009 at 10:20 AM, wixor <wixorpeek@xxxxxxxxx> wrote: >>> Hello, >>> with recent upgrade to 2.6.31 I get >>> >>> it87: Found IT8712F chip at 0x290, revision 7 >>> it87: in3 is VCC (+5V) >>> it87: in7 is VCCH (+5V Stand-By) >>> ACPI: I/O resource it87 [0x295-0x296] conflicts with ACPI region IP__ >>> [0x295-0x296] >>> ACPI: Device needs an ACPI driver >>> FATAL: Error inserting it87 >>> (/lib/modules/2.6.31/kernel/drivers/hwmon/it87.ko): Device or resource >>> busy >> >>[...] >> >>> I have also discovered that dsdt contains description of what is >>> connected to each it87 input. Maybe it has also some code to access >>> the chip? In /proc/acpi I can read only one temperature, while the >>> chip measures three temperatures, fan speeds and voltages. This is >>> desktop pc with ASUS A8N1-E maniboard, athlon64 and nforce4 chipset. >> >>Try the asus_atk0110 driver, it handles the ACPI hwmon interface on >>Asus motherboards. If it does not work then please send a dump of your >>DSDT (/sys/firmware/acpi/tables/DSDT). >> > Jumping in the middle of this, I am another that it87 doesn't work very well > for, ASUS M2N SLI Deluxe board. Please define "doesn't work well". asus_atk0110 should handle that board. In case of troubles enable CONFIG_HWMON_DEBUG_CHIP, load asus_atk0110 and post the content of the kernel log. Luca _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
