Hi Adrian, On Mon, 7 Sep 2009 21:56:55 +0300, Adrian Sevcenco wrote: > I would need some advice about creating the sensors3.conf for Supermicro > X7DWN+ motherboard .. > > what chip should i use? in my centos 5.3 i have driver only up to w83792d > > also is not very clear to me what do i do with the offsets of various > data (in sensors example the line with offsets is only a comment ... ) > > i have the following info from vendor : > (it seems that the info is common for X7DW3, X7DWN, X7DWA, X7DBI, X7DBU, > X7DBN) > > Bus Type = SMBus > One W83793G So, the board has a Winbond W83783G and your OS doesn't support this chip. It should be pretty clear at this point that it's simply not going to work, no matter what you put in sensors3.conf. You either need to upgrade to a more recent OS, or backport the w83793 driver to your OS. The latter shouldn't be too difficult, I know a number of people have done that already, as apparently boards with Winbond W83793G chips are popular amongst RHEL 5 / CentOS 5 users. If you don't know how to do this, you can try to find a kernel developer who will do it for you. That could be me, if you have a piece of hardware you no longer need and you wouldn't mind shipping it to me: http://khali.linux-fr.org/wishlist.html > Windbond W83793G, Slave Address=0x2f (0x5E in 8-Bit format) > ============================================================= > Fan1 Fan Speed, Offset 0x23, 0x24 RPM = 1350000/Data > Fan2 Fan Speed, Offset 0x25, 0x26 RPM = 1350000/Data > Fan3 Fan Speed, Offset 0x27, 0x28 RPM = 1350000/Data > Fan4 Fan Speed, Offset 0x29, 0x2a RPM = 1350000/Data > Fan5 Fan Speed, Offset 0x2b, 0x2c RPM = 1350000/Data > Fan6 Fan Speed, Offset 0x2d, 0x2e RPM = 1350000/Data > Fan7/CPU1 Fan Speed, Offset 0x2f, 0x30 RPM = 1350000/Data > Fan8/CPU2 Fan Speed, Offset 0x31, 0x32 RPM = 1350000/Data > CPU1 Core Voltage, Offset 0x10 Voltage = Data* 0.008 > CPU2 Core Voltage, Offset 0x11 Voltage = Data* 0.008 > > -12V Voltage, Offset 0x14 Voltage = > ((Data*0.016) - (2.048*(232./260.)))/(1-(232./260.)) > > +1.5V Voltage, Offset 0x15 Voltage = Data* 0.016 > +3.3V Voltage, Offset 0x16 Voltage = Data* 0.016 > +12V Voltage, Offset 0x17 Voltage = Data* 0.008/ (10./120.) > +5V Voltage, Offset 0x18 Voltage = Data* 0.024 > 5Vsb Voltage, Offset 0x19 Voltage = Data* 0.024 > Battery Voltage, Offset 0x1a Voltage = Data* 0.016 > > CPU1 CoreA (PECI Agent1) Temperature, Offset 0x1c Temperature = Data > > CPU1 CoreB (PECI Agent2) Temperature, Offset 0x1d Temperature = Data > > CPU2 CoreA (PECI Agent3) Temperature, Offset 0x1e Temperature = Data > > CPU2 CoreB (PECI Agent4) Temperature, Offset 0x1f Temperature = Data > > System Temperature, Offset 0x20 Temperature = Data > Chassis Intrusion, Offset 0x44, BitMask 0x40 1 = Bad, 0 = Good That's the nice thing with Supermicro: they provide all the technical data one needs to refine the sensors configuration. With the above you can write a perfect custom sensors3.conf file for your board. All you have to do is cross-check the register addresses (named "offset" in the above document) with either the driver source code or the datasheet. > Windbond W83627HF > ============================================================= > Power Supply Failure, GP11(From W83627HF) 1 = Good, 0 = Bad This last feature we unfortunately do not support (yet). -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
