Thanks for the reply, but it looks like I posted too soon. I upgraded to 3.1.1 and now I see the output: recluce ~ # sensors coretemp-isa-0000 Adapter: ISA adapter Core 0: +44.0 C (high = +80.0 C, crit = +100.0 C) coretemp-isa-0001 Adapter: ISA adapter Core 1: +43.0 C (high = +80.0 C, crit = +100.0 C) coretemp-isa-0002 Adapter: ISA adapter Core 2: +45.0 C (high = +80.0 C, crit = +100.0 C) coretemp-isa-0003 Adapter: ISA adapter Core 3: +45.0 C (high = +80.0 C, crit = +100.0 C) coretemp-isa-0004 Adapter: ISA adapter Core 4: +45.0 C (high = +80.0 C, crit = +100.0 C) coretemp-isa-0005 Adapter: ISA adapter Core 5: +43.0 C (high = +80.0 C, crit = +100.0 C) coretemp-isa-0006 Adapter: ISA adapter Core 6: +46.0 C (high = +80.0 C, crit = +100.0 C) coretemp-isa-0007 Adapter: ISA adapter Core 7: +45.0 C (high = +80.0 C, crit = +100.0 C) atk0110-acpi-0 Adapter: ACPI interface Vcore Voltage: +0.94 V (min = +0.80 V, max = +1.60 V) +3.3 Voltage: +3.30 V (min = +2.97 V, max = +3.63 V) +5 Voltage: +5.12 V (min = +4.50 V, max = +5.50 V) +12 Voltage: +12.14 V (min = +10.20 V, max = +13.80 V) CPU FAN Speed: 1721 RPM (min = 600 RPM) CHASSIS1 FAN Speed: 0 RPM (min = 600 RPM) CHASSIS2 FAN Speed: 0 RPM (min = 600 RPM) POWER FAN Speed: 0 RPM (min = 0 RPM) CPU Temperature: +47.5 C (high = +60.0 C, crit = +75.0 C) MB Temperature: +45.0 C (high = +45.0 C, crit = +75.0 C) So it works perfectly on an Asus P6T SE with the atk0110 driver. By the way, dmesg doesn't show anything when I load the driver, but as you can see it works fine. Thanks again for you help. Tim Ryan Please avoid sending me Word or PowerPoint attachments. See http://www.gnu.org/philosophy/no-word-attachments.html On Tue, Sep 15, 2009 at 2:46 PM, Luca Tettamanti <kronos.it@xxxxxxxxx> wrote: > On Tue, Sep 15, 2009 at 8:11 PM, Tim Ryan <tryan@xxxxxxxxx> wrote: >> Should this driver work on the ASUS P6T SE? > > Well, a tester confirmed that it works on the P6T Deluxe. To give a > definite answer I must take a look at the DSDT of your board. > >> I load the module with no problem, > > Look at the output of dmesg; the driver is verbose when loading. > >> but sunning sensors only shows the output from >> coretemp-isa-0000, all the cores. When I load the w83627ehf module >> sensors reports all the temps, voltages and fans, but I have to use >> acpi_enforce_resources=lax because of conflicts. I'd prefer the Asus >> ATK0110 if I can get it to work. > > Send me a copy of your DSDT: > > cat /sys/firmware/acpi/tables/DSDT | bzip2 > /tmp/dsdt.bz2 > > or - for older kernels: > cat /proc/acpi/dsdt | bzip2 > /tmp/dsdt.bz2 > > Luca > _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
