Now that we have ACPI-based hardware monitoring drivers, and we will start telling users to use them instead of native drivers when I/O resources conflict, I think it would be good to clearly mark ACPI drivers as such in Kconfig. Also, in the case of monolithic kernels, I think the ACPI drivers should take precedence over native drivers, so they should be listed first in Makefile. Signed-off-by: Jean Delvare <khali@xxxxxxxxxxxx> Cc: Luca Tettamanti <kronos.it@xxxxxxxxx> --- drivers/hwmon/Kconfig | 100 +++++++++++++++++++++++++----------------------- drivers/hwmon/Makefile | 6 +- 2 files changed, 58 insertions(+), 48 deletions(-) --- linux-2.6.31-rc9.orig/drivers/hwmon/Kconfig 2009-09-03 18:18:30.000000000 +0200 +++ linux-2.6.31-rc9/drivers/hwmon/Kconfig 2009-09-07 17:26:31.000000000 +0200 @@ -28,6 +28,17 @@ config HWMON_VID tristate default n +config HWMON_DEBUG_CHIP + bool "Hardware Monitoring Chip debugging messages" + default n + help + Say Y here if you want the I2C chip drivers to produce a bunch of + debug messages to the system log. Select this if you are having + a problem with I2C support and want to see more of what is going + on. + +comment "Native drivers" + config SENSORS_ABITUGURU tristate "Abit uGuru (rev 1 & 2)" depends on X86 && EXPERIMENTAL @@ -248,18 +259,6 @@ config SENSORS_ASB100 This driver can also be built as a module. If so, the module will be called asb100. -config SENSORS_ATK0110 - tristate "ASUS ATK0110 ACPI hwmon" - depends on X86 && ACPI && EXPERIMENTAL - help - If you say yes here you get support for the ACPI hardware - monitoring interface found in many ASUS motherboards. This - driver will provide readings of fans, voltages and temperatures - through the system firmware. - - This driver can also be built as a module. If so, the module - will be called asus_atk0110. - config SENSORS_ATXP1 tristate "Attansic ATXP1 VID controller" depends on I2C && EXPERIMENTAL @@ -947,34 +946,6 @@ config SENSORS_HDAPS Say Y here if you have an applicable laptop and want to experience the awesome power of hdaps. -config SENSORS_LIS3LV02D - tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer" - depends on ACPI && INPUT - select INPUT_POLLDEV - select NEW_LEDS - select LEDS_CLASS - default n - help - This driver provides support for the LIS3LV02Dx accelerometer. In - particular, it can be found in a number of HP laptops, which have the - "Mobile Data Protection System 3D" or "3D DriveGuard" feature. On such - systems the driver should load automatically (via ACPI). The - accelerometer might also be found in other systems, connected via SPI - or I2C. The accelerometer data is readable via - /sys/devices/platform/lis3lv02d. - - This driver also provides an absolute input class device, allowing - the laptop to act as a pinball machine-esque joystick. On HP laptops, - if the led infrastructure is activated, support for a led indicating - disk protection will be provided as hp:red:hddprotection. - - This driver can also be built as modules. If so, the core module - will be called lis3lv02d and a specific module for HP laptops will be - called hp_accel. - - Say Y here if you have an applicable laptop and want to experience - the awesome power of lis3lv02d. - config SENSORS_LIS3_SPI tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)" depends on !ACPI && SPI_MASTER && INPUT @@ -1017,13 +988,50 @@ config SENSORS_APPLESMC Say Y here if you have an applicable laptop and want to experience the awesome power of applesmc. -config HWMON_DEBUG_CHIP - bool "Hardware Monitoring Chip debugging messages" +if ACPI + +comment "ACPI drivers" + +config SENSORS_ATK0110 + tristate "ASUS ATK0110" + depends on X86 && EXPERIMENTAL + help + If you say yes here you get support for the ACPI hardware + monitoring interface found in many ASUS motherboards. This + driver will provide readings of fans, voltages and temperatures + through the system firmware. + + This driver can also be built as a module. If so, the module + will be called asus_atk0110. + +config SENSORS_LIS3LV02D + tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer" + depends on INPUT + select INPUT_POLLDEV + select NEW_LEDS + select LEDS_CLASS default n help - Say Y here if you want the I2C chip drivers to produce a bunch of - debug messages to the system log. Select this if you are having - a problem with I2C support and want to see more of what is going - on. + This driver provides support for the LIS3LV02Dx accelerometer. In + particular, it can be found in a number of HP laptops, which have the + "Mobile Data Protection System 3D" or "3D DriveGuard" feature. On such + systems the driver should load automatically (via ACPI). The + accelerometer might also be found in other systems, connected via SPI + or I2C. The accelerometer data is readable via + /sys/devices/platform/lis3lv02d. + + This driver also provides an absolute input class device, allowing + the laptop to act as a pinball machine-esque joystick. On HP laptops, + if the led infrastructure is activated, support for a led indicating + disk protection will be provided as hp:red:hddprotection. + + This driver can also be built as modules. If so, the core module + will be called lis3lv02d and a specific module for HP laptops will be + called hp_accel. + + Say Y here if you have an applicable laptop and want to experience + the awesome power of lis3lv02d. + +endif # ACPI endif # HWMON --- linux-2.6.31-rc9.orig/drivers/hwmon/Makefile 2009-09-03 18:18:30.000000000 +0200 +++ linux-2.6.31-rc9/drivers/hwmon/Makefile 2009-09-07 17:22:10.000000000 +0200 @@ -5,6 +5,10 @@ obj-$(CONFIG_HWMON) += hwmon.o obj-$(CONFIG_HWMON_VID) += hwmon-vid.o +# APCI drivers +obj-$(CONFIG_SENSORS_ATK0110) += asus_atk0110.o + +# Native drivers # asb100, then w83781d go first, as they can override other drivers' addresses. obj-$(CONFIG_SENSORS_ASB100) += asb100.o obj-$(CONFIG_SENSORS_W83627HF) += w83627hf.o @@ -29,10 +33,8 @@ obj-$(CONFIG_SENSORS_ADT7462) += adt7462 obj-$(CONFIG_SENSORS_ADT7470) += adt7470.o obj-$(CONFIG_SENSORS_ADT7473) += adt7473.o obj-$(CONFIG_SENSORS_ADT7475) += adt7475.o - obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o obj-$(CONFIG_SENSORS_AMS) += ams/ -obj-$(CONFIG_SENSORS_ATK0110) += asus_atk0110.o obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o obj-$(CONFIG_SENSORS_DME1737) += dme1737.o -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
