Re: [PATCH 2/2] k8temp add support for family 10h and 11h

[Rob Robason <Rob@xxxxxxxxxxx>]

I'm running my Fedora 11 system on an AMD Athlon 64 X2 7750 processor and Gigabyte GA-MA78GM-US2H motherboard. 
Running sensors-detect(8) finds the embedded "AMD K10 thermal sensors" and reports "(driver "to be written"). In the summary it reports:
>     Driver `to-be-written':
>       * Chip `AMD K10 thermal sensors' (confidence: 9)
>     
>     Note: there is no driver for AMD K10 thermal sensors yet.
>     Check http://www.lm-sensors.org/wiki/Devices for updates.
Checking the site, I found the subject topic and wondered if the 10h family is synonymous with K10, and if the subject patch applies to my system?

The sensors(1) app appears to pick up temperature readings from my system, but I'm not able to figure out the mapping of the values I'm getting (sample below):
>     $ sensors
>     it8718-isa-0228
>     Adapter: ISA adapter
>     in0:         +1.04 V  (min =  +0.00 V, max =  +4.08 V)   
>     in1:         +1.95 V  (min =  +0.00 V, max =  +4.08 V)   
>     in2:         +3.30 V  (min =  +0.00 V, max =  +4.08 V)   
>     in3:         +2.96 V  (min =  +0.00 V, max =  +4.08 V)   
>     in4:         +3.06 V  (min =  +0.00 V, max =  +4.08 V)   
>     in5:         +4.08 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
>     in6:         +4.08 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
>     in7:         +2.03 V  (min =  +0.00 V, max =  +4.08 V)   
>     Vbat:        +3.30 V
>     fan1:       2537 RPM  (min =   10 RPM)
>     fan2:          0 RPM  (min =    0 RPM)
>     fan3:          0 RPM  (min =    0 RPM)
>     fan4:          0 RPM  (min =    0 RPM)
>     temp1:       +44.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
>     temp2:       +37.0°C  (low  = +127.0°C, high = +60.0°C)  sensor = thermal diode
>     temp3:       +46.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
>     cpu0_vid:   +1.550 V
Can you help me understand whether I need to wait for a K10 driver, can use the subject patch, or need nothing? If waiting for the K10 driver is the answer, can you give me any sense of when that might be available? If I can use the patch, can you guide me on how to apply it to my system?

Thanks, and best regards,

Rob Robason Improving Software Development Practices and Products

Work: 925-825-1512 Mobile: 925-348-1512

Email: rob@xxxxxxxxxxx http://www.linkedin.com/in/robrobason

Concord, CA 94518

See who we know in common

Want a signature like this?

Attachment: smime.p7s
Description: S/MIME cryptographic signature

_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors