Dear support, i have a working sensors.conf for the following MSI industrial mainboard, please add to your configurations page: IM-945GSE-A http://de.msi.com/index.php?func=proddesc&prod_no=1693&maincat_no=388# enjoy # lm_sensors configuration file for the MSI IM-945GSE-A motherboard # Atom N270, Dual Gigabit Intel 82574L controllers, VGA, DVI # 2009-07-01 Thomas Ettwein chip "f71882fg-*" # Temperature label temp1 "CPU" label temp2 "Systemboard" ignore temp3 # Fans ignore fan1 # no connector on board label fan2 "CPUFAN1" ignore fan3 # no connector on board ignore fan4 # no connector on board # Voltage label in0 "3.3V" label in1 "Vcore" label in2 "Vdimm" label in3 "Vchip" label in4 "+5V" label in5 "12V" label in6 "5VSB" label in7 "3VSB" label in8 "Battery" # never change the in0, in7 and in8 compute, these are hardwired in the chip! compute in0 (@ * 2), (@ / 2) compute in2 (@ * 2), (@ / 2) compute in3 (@ * 2), (@ / 2) compute in4 (@ * 5.25), (@ / 5.25) compute in5 (@ * 12.83), (@ / 12.83) compute in6 (@ * 5.25), (@ / 5.25) compute in7 (@ * 2), (@ / 2) compute in8 (@ * 2), (@ / 2)
