Hello everybody!
I've created a mainboard specific configuration for Gigabyte EP45-DS3P:
=== snip ===
chip "it87-*" "it8712-*" "it8716-*" "it8718-*" "it8720-*"
label in0 "Vcore"
label in1 "Vram"
label in2 "+3.3V"
label in3 "+5V"
# Standard resistor
compute in3 @ * ( 6.8/10+1), @ / (6.8/10+1)
ignore in4
label in5 "+12V"
# that's a bit weird, as the value (29.6) is close to typical resistor,
# but it does give proper results (in line with what a multimeter
# and BIOS show)
compute in5 @ * (29.6/10+1), @ / (29.6/10+1)
ignore in6
# not sure about this one
label in7 "5VSB"
compute in7 @ * (6.8/10+1), @ / (6.8/10+1)
label in8 "Vbat"
# labels are after the ones printed on the mainboard
label fan1 "CPU_FAN"
label fan2 "SYS_FAN2"
label fan3 "PWR_FAN"
label fan4 "SYS_FAN1"
label temp1 "Sys Temp"
label temp2 "Tcase Temp"
ignore temp3
=== snip ===
Hope it helps!
--
Hubert Kario
QBS - Quality Business Software
02-656 Warszawa, ul. Ksawer?w 30/85
tel. +48 (22) 646-61-51, 646-74-24
www.qbs.com.pl
System Zarz?dzania Jako?ci?
zgodny z norm? ISO 9001:2000
