Have attached cpuinfo and ioports. I chose 0x0600 as the base address for the SCH3114 SuperIO, seems to work so far. Better suggestions welcome ;-) Thank you! Stefan. 2009/4/30 Rudolf Marek <r.marek at assembler.cz> > Hi, > > If you tell me cat /proc/cpuinfo and what type of SB you have I might tell > some IO addresses which are safe to use ;) > > I think you can setup there usually something around 0x300 like 0x290. > Assuming that the rest of superio lives at 0x2e/0x2f or so... > > Btw what BIOS is that? > > Rudolf > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20090430/c9117bee/attachment.html -------------- next part -------------- A non-text attachment was scrubbed... Name: proc.cpuinfo Type: application/octet-stream Size: 1359 bytes Desc: not available Url : http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20090430/c9117bee/attachment.obj -------------- next part -------------- A non-text attachment was scrubbed... Name: proc.ioports Type: application/octet-stream Size: 1009 bytes Desc: not available Url : http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20090430/c9117bee/attachment-0001.obj
