My Motherboard is an ECS GeForce 6100 PM-M2, with a IT8726 I/O chip. After extensive web searching, I haven't (yet!) discovered the appropriate labels or calculations for the readings given in sensors. Vcore and VDIMM are based on readings from the BIOS, the 3.3V label seemed logical, the M/B temp is based on Systemp in BIOS, and Fake Temp is so called because it reads a constant 25?C - even when I'm torturing the CPU! Talking of temperatures, they do seem a little dodgy - is the CPU really 10?C cooler than room temp, and the motherboard 10?C hotter? Oh, and I have a fan hooked up to the SYSFAN header (which gives an RPM reading if I plug it into the CPUFAN header), but it looks as though ECS haven't connected the RPM pin to the chip :( If anyone can make head or tail of this lot I'd be grateful! [ben at LinuxBox ~]$ sensors k8temp-pci-00c3 Adapter: PCI adapter Core0 Temp: +13.0?C Core0 Temp: +3.0?C Core1 Temp: +6.0?C Core1 Temp: +2.0?C acpitz-virtual-0 Adapter: Virtual device temp1: +16.0?C (crit = +70.0?C) it8716-isa-0290 Adapter: ISA adapter Vcore?: +1.30 V (min = +0.00 V, max = +4.08 V) in1: +2.48 V (min = +0.00 V, max = +4.08 V) VDIMM?: +1.84 V (min = +0.00 V, max = +4.08 V) +3.3V?: +3.31 V (min = +0.00 V, max = +4.08 V) in4: +1.20 V (min = +0.00 V, max = +4.08 V) in5: +1.15 V (min = +0.00 V, max = +4.08 V) in6: +2.94 V (min = +0.00 V, max = +4.08 V) in7: +3.06 V (min = +0.00 V, max = +4.08 V) VBat: +3.01 V fan1: 2360 RPM (min = 11 RPM) fan2: 0 RPM (min = 0 RPM) CPU temp: +16.0?C (low = -1.0?C, high = +127.0?C) sensor = thermal diode M/B temp: +35.0?C (low = -1.0?C, high = +127.0?C) sensor = transistor Fake temp: +25.0?C (low = -1.0?C, high = +127.0?C) sensor = transistor cpu0_vid: +1.525 V
