ipmisensors to use or not to use?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Nov 17, 2008 at 01:56:32PM -0800, Darrick J. Wong wrote:
> On Mon, Nov 17, 2008 at 06:05:30PM +0100, Sven Anders wrote:
> > 
> > Hmm?!
> > Does nobody know or is nobody willing to answer?
> > 
> > I'm thinking of updating the patch for newer kernel, but
> > as my time is limited, I would only do this, if it's the
> > right way and it has a chance to be integrated in the
> > kernel.
> 
> As I recall, the driver needs to be ported to 2.6.28-rc.  Both it and
> ibmpex try to call hwmon_device_register on the bmc device, which causes
> problems if someone tries to load both.  I think there was a
> general unease with putting it in without some more code review.  The
> author doesn't seem to be pushing for its inclusion.  If nothing else, I
> did a quick port to 2.6.28-rc5 and it miscategorizes a power meter as a
> current sensor and the fan RPM sensors totally don't work.  I might be
> able to clean it up a bit and then maybe we can push it into the
> scary-upcoming-drivers tree?

Blechk.  Also crashes on rmmod, and it seems that the only thing that
works are the voltage sensors.  Lots of strange looking code to convert
sensor readings too.

--D




[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux