[RFC] PATCH: f71882fg add support for the f71862fg

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

I've tested the patch, and it works without problems with the F71862FG
on my NC81-LF board.

Regards

Tony

On Mon, 2008-10-20 at 17:08 +0200, Hans de Goede wrote:
> Hi All,
> 
> This patch adds support for the Fintek f71862fg superio monitoring functions to
> the f71882fg driver.
> 
> This patch applies on to of the patches adding pwm support to the f71882fg driver.
> 
> I'm waiting for feedback from Tony McConnell to actually test this as I don't 
> have the hardware. I expect no troubles with testing and would appreciate a 
> review now, so that this patch can get merged into 2.6.28 as soon as its tested.
> 
> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
> 
> Regards,
> 
> Hans
> plain text document attachment (f71882fg-add-f71862fg-support.patch)
> This patch adds support for the Fintek f71862fg superio monitoring functions to
> the f71882fg driver.
> 
> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
> --- f71882fg.c.pre-f71862fg	2008-10-20 11:32:17.000000000 +0200
> +++ f71882fg.c	2008-10-20 16:45:00.000000000 +0200
> @@ -1,6 +1,6 @@
>  /***************************************************************************
>   *   Copyright (C) 2006 by Hans Edgington <hans at edgington.nl>              *
> - *   Copyright (C) 2007 by Hans de Goede  <j.w.r.degoede at hhs.nl>           *
> + *   Copyright (C) 2007,2008 by Hans de Goede <hdegoede at redhat.com>        *
>   *                                                                         *
>   *   This program is free software; you can redistribute it and/or modify  *
>   *   it under the terms of the GNU General Public License as published by  *
> @@ -43,6 +43,7 @@
>  #define SIO_REG_ADDR		0x60	/* Logical device address (2 bytes) */
>  
>  #define SIO_FINTEK_ID		0x1934	/* Manufacturers ID */
> +#define SIO_F71862_ID		0x0601	/* Chipset ID */
>  #define SIO_F71882_ID		0x0541	/* Chipset ID */
>  
>  #define REGION_LENGTH		8
> @@ -51,10 +52,10 @@
>  
>  #define F71882FG_REG_PECI		0x0A
>  
> -#define F71882FG_REG_IN_STATUS		0x12
> -#define F71882FG_REG_IN_BEEP		0x13
> +#define F71882FG_REG_IN_STATUS		0x12 /* f71882fg only */
> +#define F71882FG_REG_IN_BEEP		0x13 /* f71882fg only */
>  #define F71882FG_REG_IN(nr)		(0x20  + (nr))
> -#define F71882FG_REG_IN1_HIGH		0x32
> +#define F71882FG_REG_IN1_HIGH		0x32 /* f71882fg only */
>  
>  #define F71882FG_REG_FAN(nr)		(0xA0 + (16 * (nr)))
>  #define F71882FG_REG_FAN_TARGET(nr)	(0xA2 + (16 * (nr)))
> @@ -97,6 +98,13 @@
>  		 "(0=don't change, 1=pwm, 2=rpm)\n"
>  		 "Note: this needs a write to pwm#_enable to take effect");
>  
> +enum chips { f71862fg, f71882fg };
> +
> +static const char *f71882fg_names[] = {
> +	"f71862fg",
> +	"f71882fg",
> +};
> +
>  static struct platform_device *f71882fg_pdev;
>  
>  /* Super-I/O Function prototypes */
> @@ -106,8 +114,14 @@
>  static inline void superio_select(int base, int ld);
>  static inline void superio_exit(int base);
>  
> +struct f71882fg_sio_data {
> +	enum chips type;
> +};
> +
>  struct f71882fg_data {
>  	unsigned short addr;
> +	enum chips type;
> +	const char *name;
>  	struct device *hwmon_dev;
>  
>  	struct mutex update_lock;
> @@ -229,10 +243,6 @@
>  
>  static int __devinit f71882fg_probe(struct platform_device * pdev);
>  static int __devexit f71882fg_remove(struct platform_device *pdev);
> -static int __init f71882fg_init(void);
> -static int __init f71882fg_find(int sioaddr, unsigned short *address);
> -static int __init f71882fg_device_add(unsigned short address);
> -static void __exit f71882fg_exit(void);
>  
>  static struct platform_driver f71882fg_driver = {
>  	.driver = {
> @@ -243,20 +253,15 @@
>  	.remove		= __devexit_p(f71882fg_remove),
>  };
>  
> -static struct device_attribute f71882fg_dev_attr[] =
> +static struct sensor_device_attribute_2 f71882fg_dev_attr[] =
>  {
> -	__ATTR( name, S_IRUGO, show_name, NULL ),
> +	SENSOR_ATTR_2(name, S_IRUGO, show_name, NULL, 0, 0),
>  };
>  
> -static struct sensor_device_attribute_2 f71882fg_in_temp_attr[] =
> +static struct sensor_device_attribute_2 f718x2fg_in_temp_attr[] =
>  {
>  	SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0),
>  	SENSOR_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 0, 1),
> -	SENSOR_ATTR_2(in1_max, S_IRUGO|S_IWUSR, show_in_max, store_in_max,
> -		0, 1),
> -	SENSOR_ATTR_2(in1_beep, S_IRUGO|S_IWUSR, show_in_beep, store_in_beep,
> -		0, 1),
> -	SENSOR_ATTR_2(in1_alarm, S_IRUGO, show_in_alarm, NULL, 0, 1),
>  	SENSOR_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 0, 2),
>  	SENSOR_ATTR_2(in3_input, S_IRUGO, show_in, NULL, 0, 3),
>  	SENSOR_ATTR_2(in4_input, S_IRUGO, show_in, NULL, 0, 4),
> @@ -308,7 +313,15 @@
>  	SENSOR_ATTR_2(temp3_fault, S_IRUGO, show_temp_fault, NULL, 0, 2)
>  };
>  
> -static struct sensor_device_attribute_2 f71882fg_fan_attr[] = {
> +static struct sensor_device_attribute_2 f71882fg_in_temp_attr[] = {
> +	SENSOR_ATTR_2(in1_max, S_IRUGO|S_IWUSR, show_in_max, store_in_max,
> +		0, 1),
> +	SENSOR_ATTR_2(in1_beep, S_IRUGO|S_IWUSR, show_in_beep, store_in_beep,
> +		0, 1),
> +	SENSOR_ATTR_2(in1_alarm, S_IRUGO, show_in_alarm, NULL, 0, 1),
> +};
> +
> +static struct sensor_device_attribute_2 f718x2fg_fan_attr[] = {
>  	SENSOR_ATTR_2(fan1_input, S_IRUGO, show_fan, NULL, 0, 0),
>  	SENSOR_ATTR_2(fan1_full_speed, S_IRUGO|S_IWUSR,
>  		      show_fan_full_speed,
> @@ -330,13 +343,6 @@
>  	SENSOR_ATTR_2(fan3_beep, S_IRUGO|S_IWUSR, show_fan_beep,
>  		store_fan_beep, 0, 2),
>  	SENSOR_ATTR_2(fan3_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 2),
> -	SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3),
> -	SENSOR_ATTR_2(fan4_full_speed, S_IRUGO|S_IWUSR,
> -		      show_fan_full_speed,
> -		      store_fan_full_speed, 0, 3),
> -	SENSOR_ATTR_2(fan4_beep, S_IRUGO|S_IWUSR, show_fan_beep,
> -		store_fan_beep, 0, 3),
> -	SENSOR_ATTR_2(fan4_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 3),
>  
>  	SENSOR_ATTR_2(pwm1, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 0),
>  	SENSOR_ATTR_2(pwm1_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
> @@ -346,6 +352,75 @@
>  	SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR,
>  		      show_pwm_auto_point_channel,
>  		      store_pwm_auto_point_channel, 0, 0),
> +
> +	SENSOR_ATTR_2(pwm2, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 1),
> +	SENSOR_ATTR_2(pwm2_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
> +		      store_pwm_enable, 0, 1),
> +	SENSOR_ATTR_2(pwm2_interpolate, S_IRUGO|S_IWUSR,
> +		      show_pwm_interpolate, store_pwm_interpolate, 0, 1),
> +	SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR,
> +		      show_pwm_auto_point_channel,
> +		      store_pwm_auto_point_channel, 0, 1),
> +
> +	SENSOR_ATTR_2(pwm3, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 2),
> +	SENSOR_ATTR_2(pwm3_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
> +		      store_pwm_enable, 0, 2),
> +	SENSOR_ATTR_2(pwm3_interpolate, S_IRUGO|S_IWUSR,
> +		      show_pwm_interpolate, store_pwm_interpolate, 0, 2),
> +	SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR,
> +		      show_pwm_auto_point_channel,
> +		      store_pwm_auto_point_channel, 0, 2),
> +};
> +
> +static struct sensor_device_attribute_2 f71862fg_fan_attr[] = {
> +	SENSOR_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO|S_IWUSR,
> +		      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
> +		      1, 0),
> +	SENSOR_ATTR_2(pwm1_auto_point2_pwm, S_IRUGO|S_IWUSR,
> +		      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
> +		      4, 0),
> +	SENSOR_ATTR_2(pwm1_auto_point1_temp, S_IRUGO|S_IWUSR,
> +		      show_pwm_auto_point_temp, store_pwm_auto_point_temp,
> +		      0, 0),
> +	SENSOR_ATTR_2(pwm1_auto_point2_temp, S_IRUGO|S_IWUSR,
> +		      show_pwm_auto_point_temp, store_pwm_auto_point_temp,
> +		      3, 0),
> +	SENSOR_ATTR_2(pwm1_auto_point1_temp_hyst, S_IRUGO|S_IWUSR,
> +		      show_pwm_auto_point_temp_hyst,
> +		      store_pwm_auto_point_temp_hyst,
> +		      0, 0),
> +	SENSOR_ATTR_2(pwm1_auto_point2_temp_hyst, S_IRUGO,
> +		      show_pwm_auto_point_temp_hyst, NULL, 3, 0),
> +
> +	SENSOR_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO|S_IWUSR,
> +		      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
> +		      1, 1),
> +	SENSOR_ATTR_2(pwm2_auto_point2_pwm, S_IRUGO|S_IWUSR,
> +		      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
> +		      4, 1),
> +	SENSOR_ATTR_2(pwm2_auto_point1_temp, S_IRUGO|S_IWUSR,
> +		      show_pwm_auto_point_temp, store_pwm_auto_point_temp,
> +		      0, 1),
> +	SENSOR_ATTR_2(pwm2_auto_point2_temp, S_IRUGO|S_IWUSR,
> +		      show_pwm_auto_point_temp, store_pwm_auto_point_temp,
> +		      3, 1),
> +	SENSOR_ATTR_2(pwm2_auto_point1_temp_hyst, S_IRUGO|S_IWUSR,
> +		      show_pwm_auto_point_temp_hyst,
> +		      store_pwm_auto_point_temp_hyst,
> +		      0, 1),
> +	SENSOR_ATTR_2(pwm2_auto_point2_temp_hyst, S_IRUGO,
> +		      show_pwm_auto_point_temp_hyst, NULL, 3, 1),
> +};
> +
> +static struct sensor_device_attribute_2 f71882fg_fan_attr[] = {
> +	SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3),
> +	SENSOR_ATTR_2(fan4_full_speed, S_IRUGO|S_IWUSR,
> +		      show_fan_full_speed,
> +		      store_fan_full_speed, 0, 3),
> +	SENSOR_ATTR_2(fan4_beep, S_IRUGO|S_IWUSR, show_fan_beep,
> +		store_fan_beep, 0, 3),
> +	SENSOR_ATTR_2(fan4_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 3),
> +
>  	SENSOR_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO|S_IWUSR,
>  		      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
>  		      0, 0),
> @@ -384,14 +459,6 @@
>  	SENSOR_ATTR_2(pwm1_auto_point4_temp_hyst, S_IRUGO,
>  		      show_pwm_auto_point_temp_hyst, NULL, 3, 0),
>  
> -	SENSOR_ATTR_2(pwm2, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 1),
> -	SENSOR_ATTR_2(pwm2_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
> -		      store_pwm_enable, 0, 1),
> -	SENSOR_ATTR_2(pwm2_interpolate, S_IRUGO|S_IWUSR,
> -		      show_pwm_interpolate, store_pwm_interpolate, 0, 1),
> -	SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR,
> -		      show_pwm_auto_point_channel,
> -		      store_pwm_auto_point_channel, 0, 1),
>  	SENSOR_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO|S_IWUSR,
>  		      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
>  		      0, 1),
> @@ -430,14 +497,6 @@
>  	SENSOR_ATTR_2(pwm2_auto_point4_temp_hyst, S_IRUGO,
>  		      show_pwm_auto_point_temp_hyst, NULL, 3, 1),
>  
> -	SENSOR_ATTR_2(pwm3, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 2),
> -	SENSOR_ATTR_2(pwm3_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
> -		      store_pwm_enable, 0, 2),
> -	SENSOR_ATTR_2(pwm3_interpolate, S_IRUGO|S_IWUSR,
> -		      show_pwm_interpolate, store_pwm_interpolate, 0, 2),
> -	SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR,
> -		      show_pwm_auto_point_channel,
> -		      store_pwm_auto_point_channel, 0, 2),
>  	SENSOR_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO|S_IWUSR,
>  		      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
>  		      0, 2),
> @@ -608,14 +667,19 @@
>  {
>  	struct f71882fg_data *data = dev_get_drvdata(dev);
>  	int nr, reg, reg2;
> +	int no_fans = (data->type == f71862fg) ? 3 : 4;
>  
>  	mutex_lock(&data->update_lock);
>  
>  	/* Update once every 60 seconds */
>  	if ( time_after(jiffies, data->last_limits + 60 * HZ ) ||
>  			!data->valid) {
> -		data->in1_max = f71882fg_read8(data, F71882FG_REG_IN1_HIGH);
> -		data->in_beep = f71882fg_read8(data, F71882FG_REG_IN_BEEP);
> +		if (data->type == f71882fg) {
> +			data->in1_max =
> +				f71882fg_read8(data, F71882FG_REG_IN1_HIGH);
> +			data->in_beep =
> +				f71882fg_read8(data, F71882FG_REG_IN_BEEP);
> +		}
>  
>  		/* Get High & boundary temps*/
>  		for (nr = 0; nr < 3; nr++) {
> @@ -656,24 +720,42 @@
>  						      F71882FG_REG_FAN_HYST0);
>  		data->pwm_auto_point_hyst[1] = f71882fg_read8(data,
>  						      F71882FG_REG_FAN_HYST1);
> -		for (nr = 0; nr < 4; nr++) {
> -			int point;
> -
> +		for (nr = 0; nr < no_fans; nr++) {
>  			data->pwm_auto_point_mapping[nr] =
>  			    f71882fg_read8(data,
>  					   F71882FG_REG_POINT_MAPPING(nr));
>  
> -			for (point = 0; point < 5; point++) {
> -				data->pwm_auto_point_pwm[nr][point] =
> -				    f71882fg_read8(data,
> -						   F71882FG_REG_POINT_PWM
> -						   (nr, point));
> -			}
> -			for (point = 0; point < 4; point++) {
> -				data->pwm_auto_point_temp[nr][point] =
> -				    f71882fg_read8(data,
> -						   F71882FG_REG_POINT_TEMP
> -						   (nr, point));
> +			if (data->type == f71882fg) {
> +				int point;
> +				for (point = 0; point < 5; point++) {
> +					data->pwm_auto_point_pwm[nr][point] =
> +						f71882fg_read8(data,
> +							F71882FG_REG_POINT_PWM
> +							(nr, point));
> +				}
> +				for (point = 0; point < 4; point++) {
> +					data->pwm_auto_point_temp[nr][point] =
> +						f71882fg_read8(data,
> +							F71882FG_REG_POINT_TEMP
> +							(nr, point));
> +				}
> +			} else {
> +				data->pwm_auto_point_pwm[nr][1] =
> +					f71882fg_read8(data,
> +						F71882FG_REG_POINT_PWM
> +						(nr, 1));
> +				data->pwm_auto_point_pwm[nr][4] =
> +					f71882fg_read8(data,
> +						F71882FG_REG_POINT_PWM
> +						(nr, 4));
> +				data->pwm_auto_point_temp[nr][0] =
> +					f71882fg_read8(data,
> +						F71882FG_REG_POINT_TEMP
> +						(nr, 0));
> +				data->pwm_auto_point_temp[nr][3] =
> +					f71882fg_read8(data,
> +						F71882FG_REG_POINT_TEMP
> +						(nr, 3));
>  			}
>  		}
>  		data->last_limits = jiffies;
> @@ -691,7 +773,7 @@
>  
>  		data->fan_status = f71882fg_read8(data,
>  						F71882FG_REG_FAN_STATUS);
> -		for (nr = 0; nr < 4; nr++) {
> +		for (nr = 0; nr < no_fans; nr++) {
>  			data->fan[nr] = f71882fg_read16(data,
>  						F71882FG_REG_FAN(nr));
>  			data->fan_target[nr] =
> @@ -703,7 +785,8 @@
>  			    f71882fg_read8(data, F71882FG_REG_PWM(nr));
>  		}
>  
> -		data->in_status = f71882fg_read8(data,
> +		if (data->type == f71882fg)
> +			data->in_status = f71882fg_read8(data,
>  						F71882FG_REG_IN_STATUS);
>  		for (nr = 0; nr < 9; nr++)
>  			data->in[nr] = f71882fg_read8(data,
> @@ -1151,13 +1234,15 @@
>  		data->pwm_enable &= ~(2 << (2 * nr));
>  		break;		/* Temperature ctrl */
>  	}
> -	switch (fan_mode[nr]) {
> -	case 1:
> -		data->pwm_enable |= 1 << (2 * nr);
> -		break;		/* Duty cycle mode */
> -	case 2:
> -		data->pwm_enable &= ~(1 << (2 * nr));
> -		break;		/* RPM mode */
> +	if (data->type == f71882fg) {
> +		switch (fan_mode[nr]) {
> +		case 1:
> +			data->pwm_enable |= 1 << (2 * nr);
> +			break;		/* Duty cycle mode */
> +		case 2:
> +			data->pwm_enable &= ~(1 << (2 * nr));
> +			break;		/* RPM mode */
> +		}
>  	}
>  	f71882fg_write8(data, F71882FG_REG_PWM_ENABLE, data->pwm_enable);
>  	mutex_unlock(&data->update_lock);
> @@ -1393,69 +1478,92 @@
>  static ssize_t show_name(struct device *dev, struct device_attribute *devattr,
>  	char *buf)
>  {
> -	return sprintf(buf, DRVNAME "\n");
> +	struct f71882fg_data *data = dev_get_drvdata(dev);
> +	return sprintf(buf, "%s\n", data->name);
>  }
>  
> +static int __devinit f71882fg_create_sysfs_files(struct platform_device *pdev,
> +	struct sensor_device_attribute_2 *attr, int count)
> +{
> +	int err, i;
> +
> +	for (i = 0; i < count; i++) {
> +		err = device_create_file(&pdev->dev, &attr[i].dev_attr);
> +		if (err)
> +			return err;
> +	}
> +	return 0;
> +}
>  
> -static int __devinit f71882fg_probe(struct platform_device * pdev)
> +static int __devinit f71882fg_probe(struct platform_device *pdev)
>  {
>  	struct f71882fg_data *data;
> -	int err, i;
> +	struct f71882fg_sio_data *sio_data = pdev->dev.platform_data;
> +	int err;
>  	u8 start_reg;
>  
> -	if (!(data = kzalloc(sizeof(struct f71882fg_data), GFP_KERNEL)))
> +	data = kzalloc(sizeof(struct f71882fg_data), GFP_KERNEL);
> +	if (!data)
>  		return -ENOMEM;
>  
>  	data->addr = platform_get_resource(pdev, IORESOURCE_IO, 0)->start;
> +	data->type = sio_data->type;
> +	data->name = f71882fg_names[sio_data->type];
>  	mutex_init(&data->update_lock);
>  	platform_set_drvdata(pdev, data);
>  
>  	/* Register sysfs interface files */
> -	for (i = 0; i < ARRAY_SIZE(f71882fg_dev_attr); i++) {
> -		err = device_create_file(&pdev->dev, &f71882fg_dev_attr[i]);
> -		if (err)
> -			goto exit_unregister_sysfs;
> -	}
> +	err = f71882fg_create_sysfs_files(pdev, f71882fg_dev_attr,
> +					  ARRAY_SIZE(f71882fg_dev_attr));
> +	if (err)
> +		goto exit_unregister_sysfs;
>  
>  	start_reg = f71882fg_read8(data, F71882FG_REG_START);
>  	if (start_reg & 0x01) {
> -		for (i = 0; i < ARRAY_SIZE(f71882fg_in_temp_attr); i++) {
> -			err = device_create_file(&pdev->dev,
> -					&f71882fg_in_temp_attr[i].dev_attr);
> +		err = f71882fg_create_sysfs_files(pdev, f718x2fg_in_temp_attr,
> +					ARRAY_SIZE(f718x2fg_in_temp_attr));
> +		if (err)
> +			goto exit_unregister_sysfs;
> +
> +		if (data->type == f71882fg) {
> +			err = f71882fg_create_sysfs_files(pdev,
> +					f71882fg_in_temp_attr,
> +					ARRAY_SIZE(f71882fg_in_temp_attr));
>  			if (err)
>  				goto exit_unregister_sysfs;
>  		}
>  	}
>  
>  	if (start_reg & 0x02) {
> -		for (i = 0; i < ARRAY_SIZE(f71882fg_fan_attr); i++) {
> -			err = device_create_file(&pdev->dev,
> -					&f71882fg_fan_attr[i].dev_attr);
> -			if (err)
> -				goto exit_unregister_sysfs;
> +		err = f71882fg_create_sysfs_files(pdev, f718x2fg_fan_attr,
> +					ARRAY_SIZE(f718x2fg_fan_attr));
> +		if (err)
> +			goto exit_unregister_sysfs;
> +
> +		if (data->type == f71862fg) {
> +			err = f71882fg_create_sysfs_files(pdev,
> +					f71862fg_fan_attr,
> +					ARRAY_SIZE(f71862fg_fan_attr));
> +		} else {
> +			err = f71882fg_create_sysfs_files(pdev,
> +					f71882fg_fan_attr,
> +					ARRAY_SIZE(f71882fg_fan_attr));
>  		}
> +		if (err)
> +			goto exit_unregister_sysfs;
>  	}
>  
>  	data->hwmon_dev = hwmon_device_register(&pdev->dev);
>  	if (IS_ERR(data->hwmon_dev)) {
>  		err = PTR_ERR(data->hwmon_dev);
> +		data->hwmon_dev = NULL;
>  		goto exit_unregister_sysfs;
>  	}
>  
>  	return 0;
>  
>  exit_unregister_sysfs:
> -	for (i = 0; i < ARRAY_SIZE(f71882fg_dev_attr); i++)
> -		device_remove_file(&pdev->dev, &f71882fg_dev_attr[i]);
> -
> -	for (i = 0; i < ARRAY_SIZE(f71882fg_in_temp_attr); i++)
> -		device_remove_file(&pdev->dev,
> -					&f71882fg_in_temp_attr[i].dev_attr);
> -
> -	for (i = 0; i < ARRAY_SIZE(f71882fg_fan_attr); i++)
> -		device_remove_file(&pdev->dev, &f71882fg_fan_attr[i].dev_attr);
> -
> -	kfree(data);
> +	f71882fg_remove(pdev); /* Will unregister the sysfs files for us */
>  
>  	return err;
>  }
> @@ -1466,15 +1574,26 @@
>  	struct f71882fg_data *data = platform_get_drvdata(pdev);
>  
>  	platform_set_drvdata(pdev, NULL);
> -	hwmon_device_unregister(data->hwmon_dev);
> +	if (data->hwmon_dev)
> +		hwmon_device_unregister(data->hwmon_dev);
>  
>  	for (i = 0; i < ARRAY_SIZE(f71882fg_dev_attr); i++)
> -		device_remove_file(&pdev->dev, &f71882fg_dev_attr[i]);
> +		device_remove_file(&pdev->dev, &f71882fg_dev_attr[i].dev_attr);
> +
> +	for (i = 0; i < ARRAY_SIZE(f718x2fg_in_temp_attr); i++)
> +		device_remove_file(&pdev->dev,
> +					&f718x2fg_in_temp_attr[i].dev_attr);
>  
>  	for (i = 0; i < ARRAY_SIZE(f71882fg_in_temp_attr); i++)
>  		device_remove_file(&pdev->dev,
>  					&f71882fg_in_temp_attr[i].dev_attr);
>  
> +	for (i = 0; i < ARRAY_SIZE(f718x2fg_fan_attr); i++)
> +		device_remove_file(&pdev->dev, &f718x2fg_fan_attr[i].dev_attr);
> +
> +	for (i = 0; i < ARRAY_SIZE(f71862fg_fan_attr); i++)
> +		device_remove_file(&pdev->dev, &f71862fg_fan_attr[i].dev_attr);
> +
>  	for (i = 0; i < ARRAY_SIZE(f71882fg_fan_attr); i++)
>  		device_remove_file(&pdev->dev, &f71882fg_fan_attr[i].dev_attr);
>  
> @@ -1483,11 +1602,12 @@
>  	return 0;
>  }
>  
> -static int __init f71882fg_find(int sioaddr, unsigned short *address)
> +static int __init f71882fg_find(int sioaddr, unsigned short *address,
> +	struct f71882fg_sio_data *sio_data)
>  {
>  	int err = -ENODEV;
>  	u16 devid;
> -	u8 start_reg;
> +	u8 reg;
>  	struct f71882fg_data data;
>  
>  	superio_enter(sioaddr);
> @@ -1499,7 +1619,14 @@
>  	}
>  
>  	devid = force_id ? force_id : superio_inw(sioaddr, SIO_REG_DEVID);
> -	if (devid != SIO_F71882_ID) {
> +	switch (devid) {
> +	case SIO_F71862_ID:
> +		sio_data->type = f71862fg;
> +		break;
> +	case SIO_F71882_ID:
> +		sio_data->type = f71882fg;
> +		break;
> +	default:
>  		printk(KERN_INFO DRVNAME ": Unsupported Fintek device\n");
>  		goto exit;
>  	}
> @@ -1519,23 +1646,35 @@
>  	*address &= ~(REGION_LENGTH - 1);	/* Ignore 3 LSB */
>  
>  	data.addr = *address;
> -	start_reg = f71882fg_read8(&data, F71882FG_REG_START);
> -	if (!(start_reg & 0x03)) {
> +	reg = f71882fg_read8(&data, F71882FG_REG_START);
> +	if (!(reg & 0x03)) {
>  		printk(KERN_WARNING DRVNAME
>  			": Hardware monitoring not activated\n");
>  		goto exit;
>  	}
>  
> +	/* If its a 71862 and the fan / pwm part is enabled sanity check
> +	   the pwm settings */
> +	if (sio_data->type == f71862fg && (reg & 0x02)) {
> +		reg = f71882fg_read8(&data, F71882FG_REG_PWM_ENABLE);
> +		if ((reg & 0x15) != 0x15) {
> +			printk(KERN_ERR DRVNAME
> +				": Invalid (reserved) pwm settings: 0x%02x\n",
> +				(unsigned int)reg);
> +			goto exit;
> +		}
> +	}
>  	err = 0;
> -	printk(KERN_INFO DRVNAME ": Found F71882FG chip at %#x, revision %d\n",
> -		(unsigned int)*address,
> +	printk(KERN_INFO DRVNAME ": Found %s chip at %#x, revision %d\n",
> +		f71882fg_names[sio_data->type],	(unsigned int)*address,
>  		(int)superio_inb(sioaddr, SIO_REG_DEVREV));
>  exit:
>  	superio_exit(sioaddr);
>  	return err;
>  }
>  
> -static int __init f71882fg_device_add(unsigned short address)
> +static int __init f71882fg_device_add(unsigned short address,
> +	const struct f71882fg_sio_data *sio_data)
>  {
>  	struct resource res = {
>  		.start	= address,
> @@ -1555,6 +1694,13 @@
>  		goto exit_device_put;
>  	}
>  
> +	err = platform_device_add_data(f71882fg_pdev, sio_data,
> +				       sizeof(struct f71882fg_sio_data));
> +	if (err) {
> +		printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
> +		goto exit_device_put;
> +	}
> +
>  	err = platform_device_add(f71882fg_pdev);
>  	if (err) {
>  		printk(KERN_ERR DRVNAME ": Device addition failed\n");
> @@ -1573,14 +1719,18 @@
>  {
>  	int err = -ENODEV;
>  	unsigned short address;
> +	struct f71882fg_sio_data sio_data;
>  
> -	if (f71882fg_find(0x2e, &address) && f71882fg_find(0x4e, &address))
> +	if (f71882fg_find(0x2e, &address, &sio_data) &&
> +	    f71882fg_find(0x4e, &address, &sio_data))
>  		goto exit;
>  
> -	if ((err = platform_driver_register(&f71882fg_driver)))
> +	err = platform_driver_register(&f71882fg_driver);
> +	if (err)
>  		goto exit;
>  
> -	if ((err = f71882fg_device_add(address)))
> +	err = f71882fg_device_add(address, &sio_data);
> +	if (err)
>  		goto exit_driver;
>  
>  	return 0;
> @@ -1598,7 +1748,7 @@
>  }
>  
>  MODULE_DESCRIPTION("F71882FG Hardware Monitoring Driver");
> -MODULE_AUTHOR("Hans Edgington (hans at edgington.nl)");
> +MODULE_AUTHOR("Hans de Goede (hdegoede at redhat.com)");
>  MODULE_LICENSE("GPL");
>  
>  module_init(f71882fg_init);





[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux