Hi there, I'm having problems with sensors on a machine based on a Fujitsu-Siemens MSI MS-6340 motherboard. The sensors chipset is chip "via686a-*" The munin plugins always report the same temperatures: [pbn at akagi] /home/pbn/Documents/other>munin-run sensors_temp temp1.value 23.2 temp2.value 23.2 temp3.value 146.2 Obviously the temp3.value is bogus, so I added "ignore temp3" in /etc/sensors3.conf. Then I get: [pbn at akagi] /home/pbn/Documents/other>munin-run sensors_temp temp1.value 23.2 temp2.value 23.2 Not surprisingly, the sensors_temp munin plugins calls the sensors command. Here is the output of the sensors command: [pbn at akagi] /home/pbn/Documents/other>sensors via686a-isa-6000 Adapter: ISA adapter CPU core: +3.10 V (min = +3.00 V, max = +1.57 V) +2.5V: +3.00 V (min = +3.10 V, max = +3.10 V) I/O: +4.13 V (min = +4.13 V, max = +4.12 V) +5V: +6.44 V (min = +6.44 V, max = +6.44 V) +12V: +15.60 V (min = +15.60 V, max = +15.12 V) CPU Fan: 0 RPM (min = 0 RPM, div = 2) P/S Fan: 5672 RPM (min = 0 RPM, div = 2) SYS Temp: +23.2 ?C (high = +146.2 ?C, hyst = +146.2 ?C) CPU Temp: +23.2 ?C (high = +125.2 ?C, hyst = +146.2 ?C) SBr Temp: +146.2 ?C (high = +146.2 ?C, hyst = +146.2 ?C) [pbn at akagi] /home/pbn/Documents/other> So ... everything in sensors' output always has the same value... ouch ! ... perhaps did I do something wrong ? ... perhaps did I forget somethin ? Thank you, -- Pierre Bauduin -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20080929/65c8b5ac/attachment.html
