I would like to get fan control working, but when running pwmconfig, I get the following message: Found the following devices: hwmon0/device is w83627dhg Found the following PWM controls: hwmon0/device/pwm1 hwmon0/device/pwm1_enable stuck to 2 Failed to set pwmhwmon0/device/pwm1 to full speed Something's wrong, check your fans! There is no fan control options that can be set in BIOS, however using Speefan under Windows I was able to control the Case fan speed although CPU fan speed is fixed. I installed lm-sensors v2.10.4 using Synaptic. Sensors shows fan speeds for both case and cpu. I tried reloading the driver with modprobe using reset/init but seems these parameters are not supported for this driver. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20080407/709397d4/attachment.html
