Hi Juerg, > > > > Trying family `SMSC'... Yes > > > > Found unknown chip with ID 0x8902 > > This is indeed unknown. Can you check the markings on the chip so that > we know what we're dealing with? From the product picture my guess is > it's the chip in the QFP package close to the IDE connector. It should > read something like SMSC xyz. There is chip marked SMSC SCH-5027D(not sure that D, might be 0)-NW According to spec which comes with MB it should be SMSC SC-5027D Thanks, Andrew. > > ...juerg > > > > > Probing for Super-I/O at 0x4e/0x4f > > > > Trying family `National Semiconductor'... No > > > > Trying family `SMSC'... No > > > > Trying family `VIA/Winbond/Fintek'... No > > > > Trying family `ITE'... No > > > > > > > > So is not this unknown chip with ID 0x8902 what is missing to support > fans > > 5/6/etc? If yes - could someone drop some light on topic when to expect > it > > supported? > > > > Thanks, > > Andrew Voznytsa > > > > > > > > _____ > > > > From: Andrew Voznytsa [mailto:andrew.voznytsa at gmail.com] > > Sent: Sunday, January 13, 2008 12:28 AM > > To: 'lm-sensors at lm-sensors.org' > > Subject: lm85 in Intel S3000AH case > > > > > > > > Hi guys, > > > > > > > > Just installed lm-sensors (2.10.4 and 3.0.0) on S3000AH-based system > (Linux > > version 2.6.23-gentoo-r3 (root at farm) (gcc version 4.1.2 (Gentoo 4.1.2 > p1.0 > > > > .2)), x86_64) - works fine except lm-sensors does not show fans 5 and 6. > Is > > it fixable? (I'd leave my chassis fan connected to 5th socket and do not > > reconnect it to 2-4) > > > > > > > > Here is part of sensors-detect output > > > > > > > > Detects correctly: > > > > * Bus `SMBus I801 adapter at 3000' > > > > Busdriver `i2c-i801', I2C address 0x2e > > > > Chip `SMSC EMC6D100, EMC6D101 or EMC6D102' (confidence: 7) > > > > > > > > And sensors output: > > > > > > > > lm85-i2c-0-2e > > > > Adapter: SMBus I801 adapter at 3000 > > > > V1.5: +2.29 V (min = +0.00 V, max = +3.32 V) > > > > VCore: +1.14 V (min = +0.00 V, max = +2.99 V) > > > > V3.3: +3.35 V (min = +0.00 V, max = +4.38 V) > > > > V5: +1.51 V (min = +0.00 V, max = +6.64 V) > > > > V12: +12.81 V (min = +0.00 V, max = +15.94 V) > > > > CPU_Fan: 1769 RPM (min = 720 RPM) > > > > fan2: 0 RPM (min = 720 RPM) > > > > fan3: 0 RPM (min = 720 RPM) > > > > fan4: 0 RPM (min = 720 RPM) > > > > CPU Temp: -63.0 C (low = -127.0 C, high = +127.0 C) > > > > Board Temp: +39.0 C (low = -127.0 C, high = +127.0 C) > > > > DIMM Temp: +29.0 C (low = -127.0 C, high = +127.0 C) > > > > cpu0_vid: +0.000 V > > > > Best regards, > > Andrew Voznytsa > > > > > > > >
