Folks, I have a system with an Intel Q6600 quad core on a ABit IP35 Pro mainboard, using Fedora 7 x64, and lm_sensors-2.10.4-1.fc7. The output from sensors is wrong. Is there a preformatted config file for these mainboard somewhere that I can find? Or can you give me a hit on what I need to know in order to create/adjust one? Thanks, James The cpu cores are really in the high 30's, cpu & case fans are not present, .... [jscott at vserv ~]$ sensors w83627dhg-isa-0290 Adapter: ISA adapter VCore: +1.46 V (min = +1.03 V, max = +1.74 V) in1: +8.76 V (min = +11.30 V, max = +2.80 V) ALARM AVCC: +3.20 V (min = +2.06 V, max = +0.88 V) ALARM 3VCC: +3.20 V (min = +1.87 V, max = +0.58 V) ALARM in4: +1.48 V (min = +0.34 V, max = +1.20 V) ALARM in5: +1.34 V (min = +1.03 V, max = +1.03 V) ALARM in6: +4.28 V (min = +5.99 V, max = +3.30 V) ALARM VSB: +3.10 V (min = +3.47 V, max = +2.02 V) ALARM VBAT: +0.51 V (min = +0.99 V, max = +2.06 V) ALARM Case Fan: 0 RPM (min = 10546 RPM, div = 128) ALARM CPU Fan: 0 RPM (min = 10546 RPM, div = 128) ALARM Aux Fan: 0 RPM (min = 10546 RPM, div = 128) ALARM fan4: 0 RPM (min = 439 RPM, div = 128) ALARM fan5: 0 RPM (min = 81 RPM, div = 128) ALARM Sys Temp: +21?C (high = +58?C, hyst = +78?C) CPU Temp: +30.0?C (high = -126.0?C, hyst = +75.5?C) AUX Temp: -23.0?C (high = +80.0?C, hyst = +75.0?C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +54?C (high = +100?C) coretemp-isa-0001 Adapter: ISA adapter Core 1: +51?C (high = +100?C) coretemp-isa-0002 Adapter: ISA adapter Core 2: +49?C (high = +100?C) coretemp-isa-0003 Adapter: ISA adapter Core 3: +52?C (high = +100?C) [jscott at vserv ~]$ [jscott at vserv ~]$ cat /etc/sysconfig/lm_sensors ... # # Generated by sensors-detect on Fri Oct 19 00:26:53 2007 MODULE_0=w83627ehf MODULE_1=coretemp [jscott at vserv ~]$ -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20071019/45a379e9/attachment.html