Hello, I have a Compaq EVO W8000 machine that I have been trying to get lm_sensors to work on. The machine is a dual Xeon board with the following chips/sensors I believe it has: 82801BA - work in progress LPC47m967 - unknown support ADM1021/LM84 - supported ADM1032/lm90 - supported Looking at the Devices page, I believe they have the corresponding support. The machine is running Fedora Core 6 x86 with lm_sensors 2.10.4. When I run sensors-detect, nothing is found. I was kind of expecting the LM84 and LM90 chips to be found, but they where not. Are they dependent on the 82801BA and LPC47m967 being found supported? Has anyone gotten lm_sensors to with with this machine? Below is the output from speedfan which is a Windoze app.... Thanks, Keith //---------------------------------------------------------------------->> Win9x:NO 64Bit:NO GiveIO:YES SpeedFan:YES I/O properly initialized Linked ISA BUS at $0290 SMBus successfully enabled Linked Intel 82801BA ICH2 SMBUS at $FC00 Scanning ISA BUS at $0290... SuperIO Chip=LPC47m967 Scanning Intel SMBus at $FC00... ADM1021 (ID=$00) found on SMBus at $18 ADM1032 (ID=$00) found on SMBus at $4C SMART Enabled for drive 0 Found SAMSUNG SP0802N (80.1GB) Found SCSI drive ST318436LW (18.4GB) Found SCSI drive ATLAS IV 18 WLS (18.4GB) End of detection Loaded 0 events
