On thecus n2100, the bootloader does not setup fans to run. In order
to protect the user from frying their gear, start up fans on boot.
Depends on:
f75375s: Add new style bindings
f75375s: allow setting up fans with platform_data
patches sent to lm-sensors mailing list.
Signed-off-by: Riku Voipio <riku.voipio at movial.fi>
---
arch/arm/mach-iop32x/n2100.c | 11 +++++++++++
1 files changed, 11 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 1873bd8..5a4acff 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -16,6 +16,7 @@
#include <linux/mm.h>
#include <linux/init.h>
+#include <linux/f75375s.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/pci.h>
@@ -200,11 +201,21 @@ static struct platform_device n2100_serial_device = {
.resource = &n2100_uart_resource,
};
+static struct f75375s_platform_data n2100_f75375s = {
+ .pwm = { 255, 255 },
+ .pwm_enable = { 0, 0 },
+};
+
static struct i2c_board_info __initdata n2100_i2c_devices[] = {
{
I2C_BOARD_INFO("rtc-rs5c372", 0x32),
.type = "rs5c372b",
},
+ {
+ I2C_BOARD_INFO("f75375", 0x2e),
+ .type = "f75375",
+ .platform_data = &n2100_f75375s,
+ },
};
/*
--
1.5.3.1
--
"rm -rf" only sounds scary if you don't have backups
