Hans de Goede schrieb: > > Roland Langner wrote: >> >> Hi, >> >> >> >> here is my sensors output for MSI K9AG Neo2-Digital >> >> >> >> k8temp-pci-00c3 >> >> Adapter: PCI adapter >> >> Core0 Temp: >> >> +15?C >> >> Core1 Temp: >> >> +15?C >> >> >> >> f71882fg-isa-0600 >> >> Adapter: ISA adapter >> >> 3.3V: +3.34 V >> >> Vcore: +0.98 V (max = +2.04 V) >> >> Vram: +2.19 V >> >> 5VSB: +5.05 V >> >> +5V: +3.78 V >> >> 12V: +6.51 V >> >> Vchip: +0.48 V >> >> 3VSB: +3.33 V >> >> Battery: +3.20 V >> >> CPU: 844 RPM >> >> System: 0 RPM ALARM >> >> Power: 960 RPM >> >> Aux: 0 RPM ALARM >> >> CPU: +9?C (high = +85?C, hyst = +81?C) >> >> (crit = +100?C, hyst = +96?C) sensor = transistor >> >> System: +92?C (high = +85?C, hyst = +81?C) ALARM >> >> (crit = +100?C, hyst = +96?C) sensor = thermistor >> >> Temp3: +26?C (high = +70?C, hyst = +68?C) >> >> (crit = +85?C, hyst = +83?C) sensor = thermistor >> >> >> >> >> >> Here the config: >> >> >> >> chip "f71882fg-*" >> >> >> >> # Temperature >> >> label temp1 "CPU" >> >> label temp2 "System" >> >> label temp3 "Temp3" >> >> >> >> # Fans >> >> label fan1 "CPU" >> >> label fan2 "System" >> >> label fan3 "Power" >> >> label fan4 "Aux" >> >> >> >> # Voltage >> >> label in0 "3.3V" >> >> label in1 "Vcore" >> >> label in2 "Vram" >> >> label in3 "5VSB" >> >> label in4 "+5V" >> >> label in5 "12V" >> >> label in6 "Vchip" >> >> label in7 "3VSB" >> >> label in8 "Battery" >> >> >> >> # never change the in0, in7 and in8 compute, these are hardwired in the >> >> chip! >> >> compute in0 (@ * 2), (@ / 2) >> >> compute in2 (@ * 2), (@ / 2) >> >> compute in3 (@ * (1+200/47)), (@ / (1+200/47)) >> >> compute in4 (@ * (1+200/47)), (@ / (1+200/47)) >> >> compute in5 (@ * (1+200/20)), (@ / (1+200/20)) >> >> compute in7 (@ * 2), (@ / 2) >> >> compute in8 (@ * 2), (@ / 2) >> >> >> >> >> >> >> >> Some Voltages are not right. (Vcore is) >> >> The board has 3 Fan-conectors. Fan at connector 3 doesn't show up. >> >> CPU Temp is to low. >> >> >> >> Config is a variation of msi P965 Platinum. >> >> Can someone help me with the config? >> >> > > > > Sure, I'm the writer and maintainer of the f71882fg driver and I'll try > > to help. Can you for starters please write down the BIOS sensors > > readings (all of them, in order they appear in the BIOS) and post those, > > then I can try to puzzle the pieces together. > > Hi Hans, sorry, yesterday i didn't replay to the list. thanks for the driver and the help. Here are the BIOS-Values: CPU Temp: 10?C System Temp 25?C CPU Fan Speed 843 Sys Fan1 Speed 964 CPU Vcore 0.984V 3.3VCC 3.344V 5V 5.088V 12V 12.056V 3.3V SB 3.344V CPU Temp in BIOS seems also a bit to low (room temp is 15?C) Regards Roland