David Brownell wrote:
> Teach LM75 driver how to use new-style driver binding.
>
> - Create a second driver struct, using new-style driver binding methods.
>
> - Make the legacy bind/unbind logic delegate all its work.
>
> - Rename the old driver struct as "lm75_legacy".
>
>
Since I copied your ideas to my driver, I guess it's at least implicit
review and ACK from me for your changes.
> - Sensor limits are chip-specific; record them, and use them in new
> routines to interconvert temperature and register values.
>
> - More careful initialization. Chips are put into 9-bit mode so
> the current interconversion routines will never fail.
>
>
These changes look sane as well.
> - Save the original chip configuration, and restore it on exit.
>
I don't really see the value on this feature..
> Signed-off-by: David Brownell <dbrownell at users.sourceforge.net>
> ---
> drivers/hwmon/Kconfig | 9 +-
> drivers/hwmon/lm75.c | 189 +++++++++++++++++++++++++++++++++++++-------------
> 2 files changed, 148 insertions(+), 50 deletions(-)
>
> --- a/drivers/hwmon/Kconfig 2007-09-24 21:59:26.000000000 -0700
> +++ b/drivers/hwmon/Kconfig 2007-09-24 21:59:42.000000000 -0700
> @@ -312,9 +312,12 @@ config SENSORS_LM75
> - TelCom (now Microchip) TCN75
> - Texas Instruments TMP100, TMP101, TMP75, TMP175, TMP275
>
> - The DS75 and DS1775 in 10- to 12-bit precision modes will require
> - a force module parameter. The driver will not handle the extra
> - precision anyhow.
> + This driver supports driver model based binding through board
> + specific I2C device tables.
> +
> + It also supports the "legacy" style of driver binding. To use
> + that with some chips which don't replicate lm75 quirks exactly,
> + you may need the "force" module parameter.
>
> This driver can also be built as a module. If so, the module
> will be called lm75. In the kernel driver
> --- a/drivers/hwmon/lm75.c 2007-09-24 21:59:35.000000000 -0700
> +++ b/drivers/hwmon/lm75.c 2007-09-24 21:59:54.000000000 -0700
> @@ -54,9 +54,11 @@ static const u8 LM75_REG_TEMP[3] = {
>
> /* Each client has this additional data */
> struct lm75_data {
> - struct i2c_client client;
> + struct i2c_client *client;
> struct device *hwmon_dev;
> struct mutex update_lock;
> + int min, max;
> + char orig_conf;
> char valid; /* !=0 if registers are valid */
> unsigned long last_updated; /* In jiffies */
> u16 temp[3]; /* Register values,
> @@ -65,7 +67,6 @@ struct lm75_data {
> 2 = hyst */
> };
>
> -static void lm75_init_client(struct i2c_client *client);
> static int lm75_read_value(struct i2c_client *client, u8 reg);
> static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value);
> static struct lm75_data *lm75_update_device(struct device *dev);
> @@ -75,13 +76,28 @@ static struct lm75_data *lm75_update_dev
>
> /* sysfs attributes for hwmon */
>
> +static inline s16 temp_to_reg(struct lm75_data *lm75, long temp)
> +{
> + if (temp < lm75->min)
> + temp = lm75->min;
> + else if (temp > lm75->max)
> + temp = lm75->max;
> +
> + return LM75_TEMP_TO_REG(temp);
> +}
> +
> +static inline int reg_to_temp(s16 reg)
> +{
> + return LM75_TEMP_FROM_REG(reg);
> +}
> +
> static ssize_t show_temp(struct device *dev, struct device_attribute *da,
> char *buf)
> {
> struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
> struct lm75_data *data = lm75_update_device(dev);
> - return sprintf(buf, "%d\n",
> - LM75_TEMP_FROM_REG(data->temp[attr->index]));
> +
> + return sprintf(buf, "%d\n", reg_to_temp(data->temp[attr->index]));
> }
>
> static ssize_t set_temp(struct device *dev, struct device_attribute *da,
> @@ -94,7 +110,7 @@ static ssize_t set_temp(struct device *d
> long temp = simple_strtol(buf, NULL, 10);
>
> mutex_lock(&data->update_lock);
> - data->temp[nr] = LM75_TEMP_TO_REG(temp);
> + data->temp[nr] = temp_to_reg(data, temp);
> lm75_write_value(client, LM75_REG_TEMP[nr], data->temp[nr]);
> mutex_unlock(&data->update_lock);
> return count;
> @@ -120,16 +136,112 @@ static const struct attribute_group lm75
>
> /*-----------------------------------------------------------------------*/
>
> +/* "New style" I2C driver binding -- following the driver model */
> +
> +static int lm75_probe(struct i2c_client *client)
> +{
> + struct lm75_data *data;
> + int status;
> + u8 set_mask, clr_mask;
> + int new;
> +
> + if (!i2c_check_functionality(client->adapter,
> + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA))
> + return -EIO;
> +
> + if (!(data = kzalloc(sizeof(struct lm75_data), GFP_KERNEL)))
> + return -ENOMEM;
> +
> + i2c_set_clientdata(client, data);
> +
> + data->client = client;
> + mutex_init(&data->update_lock);
> +
> + /* Set to LM75 resolution (9 bits, 0.5 degrees C) and range.
> + * Then tweak to be more precise when appropriate.
> + */
> + set_mask = 0;
> + clr_mask = (1 << 0) /* continuous conversions */
> + | (1 << 6) | (1 << 5); /* 9-bit mode */
> +
> + data->min = -55 * 1000;
> + data->max = 125 * 1000;
> +
> + /* for tmp175 or tmp275, use name "tmp75" */
> + if (strcmp(client->name, "tmp75") == 0)
> + data->min = -40 * 1000;
> +
> + /* NOTE: also need to ensure that the chip is in interrupt mode
> + * in various cases, and maybe handle SMBALERT#.
> + */
> +
> + /* configure as specified */
> + status = lm75_read_value(client, LM75_REG_CONF);
> + if (status < 0) {
> + dev_dbg(&client->dev, "can't read config? %d\n", status);
> + goto exit_free;
> + }
> + data->orig_conf = status;
> + new = status & ~clr_mask;
> + new |= set_mask;
> + if (status != new)
> + lm75_write_value(client, LM75_REG_CONF, new);
> + dev_dbg(&client->dev, "config %02x\n", new);
> +
> + /* Register sysfs hooks */
> + if ((status = sysfs_create_group(&client->dev.kobj, &lm75_group)))
> + goto exit_free;
> +
> + data->hwmon_dev = hwmon_device_register(&client->dev);
> + if (IS_ERR(data->hwmon_dev)) {
> + status = PTR_ERR(data->hwmon_dev);
> + goto exit_remove;
> + }
> +
> + dev_info(&client->dev, "%s: sensor '%s'\n",
> + data->hwmon_dev->bus_id, client->name);
> +
> + return 0;
> +
> +exit_remove:
> + sysfs_remove_group(&client->dev.kobj, &lm75_group);
> +exit_free:
> + kfree(data);
> + i2c_set_clientdata(client, NULL);
> + return status;
> +}
> +
> +static int lm75_remove(struct i2c_client *client)
> +{
> + struct lm75_data *data = i2c_get_clientdata(client);
> +
> + hwmon_device_unregister(data->hwmon_dev);
> + sysfs_remove_group(&client->dev.kobj, &lm75_group);
> + lm75_write_value(client, LM75_REG_CONF, data->orig_conf);
> + kfree(data);
> + i2c_set_clientdata(client, NULL);
> + return 0;
> +}
> +
> +static struct i2c_driver lm75_driver = {
> + .driver = {
> + .name = "lm75",
> + },
> + .probe = lm75_probe,
> + .remove = lm75_remove,
> +};
> +
> +/*-----------------------------------------------------------------------*/
> +
> /* "Legacy" I2C driver binding */
>
> -static struct i2c_driver lm75_driver;
> +static struct i2c_driver lm75_legacy_driver;
>
> /* This function is called by i2c_probe */
> static int lm75_detect(struct i2c_adapter *adapter, int address, int kind)
> {
> int i;
> struct i2c_client *new_client;
> - struct lm75_data *data;
> int err = 0;
>
> if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
> @@ -139,16 +251,14 @@ static int lm75_detect(struct i2c_adapte
> /* OK. For now, we presume we have a valid address. We create the
> client structure, even though there may be no sensor present.
> But it allows us to access lm75_{read,write}_value. */
> - if (!(data = kzalloc(sizeof(struct lm75_data), GFP_KERNEL))) {
> + if (!(new_client = kzalloc(sizeof *new_client, GFP_KERNEL))) {
> err = -ENOMEM;
> goto exit;
> }
>
> - new_client = &data->client;
> - i2c_set_clientdata(new_client, data);
> new_client->addr = address;
> new_client->adapter = adapter;
> - new_client->driver = &lm75_driver;
> + new_client->driver = &lm75_legacy_driver;
> new_client->flags = 0;
>
> /* Now, we do the remaining detection. There is no identification-
> @@ -189,38 +299,24 @@ static int lm75_detect(struct i2c_adapte
> goto exit_free;
> }
>
> - /* NOTE: we treat "force=..." and "force_lm75=..." the same. */
> + /* NOTE: we treat "force=..." and "force_lm75=..." the same.
> + * Only new-style driver binding distinguishes chip types.
> + */
> strlcpy(new_client->name, "lm75", I2C_NAME_SIZE);
>
> - /* Fill in the remaining client fields and put it into the global list */
> - data->valid = 0;
> - mutex_init(&data->update_lock);
> -
> /* Tell the I2C layer a new client has arrived */
> if ((err = i2c_attach_client(new_client)))
> goto exit_free;
>
> - /* Initialize the LM75 chip */
> - lm75_init_client(new_client);
> -
> - /* Register sysfs hooks */
> - if ((err = sysfs_create_group(&new_client->dev.kobj, &lm75_group)))
> + if ((err = lm75_probe(new_client)) < 0)
> goto exit_detach;
>
> - data->hwmon_dev = hwmon_device_register(&new_client->dev);
> - if (IS_ERR(data->hwmon_dev)) {
> - err = PTR_ERR(data->hwmon_dev);
> - goto exit_remove;
> - }
> -
> return 0;
>
> -exit_remove:
> - sysfs_remove_group(&new_client->dev.kobj, &lm75_group);
> exit_detach:
> i2c_detach_client(new_client);
> exit_free:
> - kfree(data);
> + kfree(new_client);
> exit:
> return err;
> }
> @@ -234,17 +330,15 @@ static int lm75_attach_adapter(struct i2
>
> static int lm75_detach_client(struct i2c_client *client)
> {
> - struct lm75_data *data = i2c_get_clientdata(client);
> - hwmon_device_unregister(data->hwmon_dev);
> - sysfs_remove_group(&client->dev.kobj, &lm75_group);
> + lm75_remove(client);
> i2c_detach_client(client);
> - kfree(data);
> + kfree(client);
> return 0;
> }
>
> -static struct i2c_driver lm75_driver = {
> +static struct i2c_driver lm75_legacy_driver = {
> .driver = {
> - .name = "lm75",
> + .name = "lm75_legacy",
> },
> .attach_adapter = lm75_attach_adapter,
> .detach_client = lm75_detach_client,
> @@ -276,16 +370,6 @@ static int lm75_write_value(struct i2c_c
> return i2c_smbus_write_word_data(client, reg, swab16(value));
> }
>
> -static void lm75_init_client(struct i2c_client *client)
> -{
> - int reg;
> -
> - /* Enable if in shutdown mode */
> - reg = lm75_read_value(client, LM75_REG_CONF);
> - if (reg >= 0 && (reg & 0x01))
> - lm75_write_value(client, LM75_REG_CONF, reg & 0xfe);
> -}
> -
> static struct lm75_data *lm75_update_device(struct device *dev)
> {
> struct i2c_client *client = to_i2c_client(dev);
> @@ -316,11 +400,22 @@ static struct lm75_data *lm75_update_dev
>
> static int __init sensors_lm75_init(void)
> {
> - return i2c_add_driver(&lm75_driver);
> + int status;
> +
> + status = i2c_add_driver(&lm75_driver);
> + if (status < 0)
> + return status;
> +
> + status = i2c_add_driver(&lm75_legacy_driver);
> + if (status < 0)
> + i2c_del_driver(&lm75_driver);
> +
> + return status;
> }
>
> static void __exit sensors_lm75_exit(void)
> {
> + i2c_del_driver(&lm75_legacy_driver);
> i2c_del_driver(&lm75_driver);
> }
>
>
> _______________________________________________
> lm-sensors mailing list
> lm-sensors at lm-sensors.org
> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
>
