On 8/22/07, David Boss <spacem0nkey411 at gmail.com> wrote: > (01:01:46 PM) saru411: hello again...finally off of school so time to try to > get lm-sensors installed.i have run sensors-detect and have gotten this... > (01:02:12 PM) saru411: # I2C adapter drivers > (01:02:12 PM) saru411: # modprobe unknown adapter NVIDIA i2c adapter 0 at > 1:00.0 > (01:02:12 PM) saru411: # modprobe unknown adapter NVIDIA i2c adapter 1 at > 1:00.0 > (01:02:12 PM) saru411: # modprobe unknown adapter NVIDIA i2c adapter 2 at > 1:00.0 > (01:02:12 PM) saru411: i2c-i801 > (01:02:12 PM) saru411: # Chip drivers > (01:02:12 PM) saru411: eeprom > (01:02:12 PM) saru411: # no driver for Smart Battery Charger yet > (01:02:12 PM) saru411: # Warning: the required module smartbatt is not > currently installed > (01:02:12 PM) saru411: # on your system. For status of 2.6 kernel ports > check > (01:02:12 PM) saru411: # > http://www.lm-sensors.org/wiki/Devices. If driver is built > (01:02:12 PM) saru411: # into the kernel, or unavailable, comment out the > following line. > (01:02:12 PM) saru411: smartbatt > (01:03:38 PM) saru411: the next step is to edit /etc/rc.d/xxxx but i dont > see /rc.d .. i have rc0.d > (01:04:08 PM) saru411: rc1.d rc2.d rc3.d rc4.d rc5.d and rc6.d > (01:04:30 PM) saru411: which one am i suppose to edit and what file do i > edit in the folder I don't even know where to start: output of lspci, motherboard model, kernel version, sensors version, output of sensors-detect, ... You have to provide some useful information if you want help. ...juerg > _______________________________________________ > lm-sensors mailing list > lm-sensors at lm-sensors.org > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors >
