Hello I'm using OpenSuse 10.2 on a Core 2 Duo E4300 with a Gigabyte 965P-DSP. I've tried to get lm_sensors working by following the explanation given here http://www.novell.com/coolsolutions/tip/16348.HTML The problem... > linux-home:~ # /etc/init.d/lm_sensors restart > Shutting down sensors: done > Starting up sensors: failed Here is the output of sensors-detect > linux-home:~ # sensors-detect > # sensors-detect revision 4171 (2006-09-24 03:37:01 -0700) > > This program will help you determine which kernel modules you need > to load to use lm_sensors most effectively. It is generally safe > and recommended to accept the default answers to all questions, > unless you know what you're doing. > > We can start with probing for (PCI) I2C or SMBus adapters. > Do you want to probe now? (YES/no): y > Probing for PCI bus adapters... > Use driver `i2c-i801' for device 0000:00:1f.3: Intel ICH8 > > We will now try to load each adapter module in turn. > Module `i2c-i801' already loaded. > If you have undetectable or unsupported adapters, you can have them > scanned by manually loading the modules before running this script. > > We are now going to do the I2C/SMBus adapter probings. Some chips may > be double detected; we choose the one with the highest confidence > value in that case. > If you found that the adapter hung after probing a certain address, > you can specify that address to remain unprobed. > > Next adapter: SMBus I801 adapter at 0500 > Do you want to scan it? (YES/no/selectively): y > Client found at address 0x08 > Client found at address 0x30 > Client found at address 0x32 > Client found at address 0x50 > Handled by driver `eeprom' (already loaded), chip type `eeprom' > Client found at address 0x52 > Handled by driver `eeprom' (already loaded), chip type `eeprom' > Client found at address 0x69 > > Next adapter: NVIDIA i2c adapter 3 at 1:00.0 > Do you want to scan it? (YES/no/selectively): y > Client found at address 0x0c > Client found at address 0x2e > Probing for `Myson MTP008'... No > Probing for `National Semiconductor LM78'... No > Probing for `National Semiconductor LM78-J'... No > Probing for `National Semiconductor LM79'... No > Probing for `National Semiconductor LM80'... No > Probing for `National Semiconductor LM85 or LM96000'... No > Probing for `Analog Devices ADM1027, ADT7460 or ADT7463'... No > Probing for `SMSC EMC6D100, EMC6D101 or EMC6D102'... No > Probing for `Analog Devices ADT7462'... No > Probing for `Analog Devices ADT7467 or ADT7468'... No > Probing for `Analog Devices ADT7470'... No > Probing for `Analog Devices ADT7473'... Success! > (confidence 5, driver `to-be-written') > Probing for `Analog Devices ADT7475'... No > Probing for `Analog Devices ADT7476'... No > Probing for `National Semiconductor LM87'... No > Probing for `National Semiconductor LM93'... No > Probing for `Winbond W83781D'... No > Probing for `Winbond W83782D'... No > Probing for `Winbond W83792D'... No > Probing for `Winbond W83793R/G'... No > Probing for `Winbond W83791SD'... No > Probing for `Winbond W83627HF'... No > Probing for `Winbond W83627EHF'... No > Probing for `Winbond W83627DHG'... No > Probing for `Asus AS99127F (rev.1)'... No > Probing for `Asus AS99127F (rev.2)'... No > Probing for `Asus ASB100 Bach'... No > Probing for `Winbond W83L785TS-S'... No > Probing for `Analog Devices ADM9240'... No > Probing for `Dallas Semiconductor DS1780'... No > Probing for `National Semiconductor LM81'... No > Probing for `Analog Devices ADM1026'... No > Probing for `Analog Devices ADM1025'... No > Probing for `Analog Devices ADM1024'... No > Probing for `Analog Devices ADM1029'... No > Probing for `Analog Devices ADM1030'... No > Probing for `Analog Devices ADM1031'... No > Probing for `Analog Devices ADM1022'... No > Probing for `Texas Instruments THMC50'... No > Probing for `Analog Devices ADM1028'... No > Probing for `ITE IT8712F'... No > Probing for `Fintek F75373S/SG'... No > Probing for `Fintek F75375S/SP'... No > Probing for `Fintek F75387SG/RG'... No > Probing for `Winbond W83791D'... No > Client found at address 0x70 > Probing for `Philips Semiconductors PCA9540'... Success! > (confidence 1, driver `pca9540') > > Next adapter: NVIDIA i2c adapter 2 at 1:00.0 > Do you want to scan it? (YES/no/selectively): y > Client found at address 0x37 > Client found at address 0x50 > Handled by driver `eeprom' (already loaded), chip type `eeprom' > Client found at address 0x51 > Handled by driver `eeprom' (already loaded), chip type `eeprom' > Client found at address 0x52 > Handled by driver `eeprom' (already loaded), chip type `eeprom' > Client found at address 0x53 > Handled by driver `eeprom' (already loaded), chip type `eeprom' > Client found at address 0x54 > Handled by driver `eeprom' (already loaded), chip type `eeprom' > Client found at address 0x55 > Handled by driver `eeprom' (already loaded), chip type `eeprom' > Client found at address 0x56 > Handled by driver `eeprom' (already loaded), chip type `eeprom' > Client found at address 0x57 > Handled by driver `eeprom' (already loaded), chip type `eeprom' > > Next adapter: NVIDIA i2c adapter 1 at 1:00.0 > Do you want to scan it? (YES/no/selectively): y > > Next adapter: NVIDIA i2c adapter 0 at 1:00.0 > Do you want to scan it? (YES/no/selectively): y > > Some chips are also accessible through the ISA I/O ports. We have to > write to arbitrary I/O ports to probe them. This is usually safe though. > Yes, you do have ISA I/O ports even if you do not have any ISA slots! > Do you want to scan the ISA I/O ports? (YES/no): y > Probing for `National Semiconductor LM78' at 0x290... No > Probing for `National Semiconductor LM78-J' at 0x290... No > Probing for `National Semiconductor LM79' at 0x290... No > Probing for `Winbond W83781D' at 0x290... No > Probing for `Winbond W83782D' at 0x290... No > Probing for `Winbond W83627HF' at 0x290... No > Probing for `Silicon Integrated Systems SIS5595'... No > Probing for `VIA VT82C686 Integrated Sensors'... No > Probing for `VIA VT8231 Integrated Sensors'... No > Probing for `AMD K8 thermal sensors'... No > Probing for `IPMI BMC KCS' at 0xca0... No > Probing for `IPMI BMC SMIC' at 0xca8... No > > Some Super I/O chips may also contain sensors. We have to write to > standard I/O ports to probe them. This is usually safe. > Do you want to scan for Super I/O sensors? (YES/no): y > Probing for Super-I/O at 0x2e/0x2f > Trying family `ITE'... Yes > Found `ITE IT8718F Super IO Sensors' Success! > (address 0x290, driver `it87') > Trying family `National Semiconductor'... No > Trying family `SMSC'... No > Trying family `VIA/Winbond/Fintek'... No > Probing for Super-I/O at 0x4e/0x4f > Trying family `ITE'... No > Trying family `National Semiconductor'... No > Trying family `SMSC'... No > Trying family `VIA/Winbond/Fintek'... No > > Now follows a summary of the probes I have just done. > Just press ENTER to continue: > > Driver `eeprom' (should be inserted): > Detects correctly: > * Bus `SMBus I801 adapter at 0500' > Busdriver `i2c-i801', I2C address 0x50 > Chip `eeprom' (confidence: 6) > * Bus `SMBus I801 adapter at 0500' > Busdriver `i2c-i801', I2C address 0x52 > Chip `eeprom' (confidence: 6) > * Bus `NVIDIA i2c adapter 2 at 1:00.0' > Busdriver `UNKNOWN', I2C address 0x50 > Chip `eeprom' (confidence: 6) > * Bus `NVIDIA i2c adapter 2 at 1:00.0' > Busdriver `UNKNOWN', I2C address 0x51 > Chip `eeprom' (confidence: 6) > * Bus `NVIDIA i2c adapter 2 at 1:00.0' > Busdriver `UNKNOWN', I2C address 0x52 > Chip `eeprom' (confidence: 6) > * Bus `NVIDIA i2c adapter 2 at 1:00.0' > Busdriver `UNKNOWN', I2C address 0x53 > Chip `eeprom' (confidence: 6) > * Bus `NVIDIA i2c adapter 2 at 1:00.0' > Busdriver `UNKNOWN', I2C address 0x54 > Chip `eeprom' (confidence: 6) > * Bus `NVIDIA i2c adapter 2 at 1:00.0' > Busdriver `UNKNOWN', I2C address 0x55 > Chip `eeprom' (confidence: 6) > * Bus `NVIDIA i2c adapter 2 at 1:00.0' > Busdriver `UNKNOWN', I2C address 0x56 > Chip `eeprom' (confidence: 6) > * Bus `NVIDIA i2c adapter 2 at 1:00.0' > Busdriver `UNKNOWN', I2C address 0x57 > Chip `eeprom' (confidence: 6) > > EEPROMs are *NOT* sensors! They are data storage chips commonly > found on memory modules (SPD), in monitors (EDID), or in some > laptops, for example. > > Driver `to-be-written' (should be inserted): > Detects correctly: > * Bus `NVIDIA i2c adapter 3 at 1:00.0' > Busdriver `UNKNOWN', I2C address 0x2e > Chip `Analog Devices ADT7473' (confidence: 5) > > Driver `pca9540' (should be inserted): > Detects correctly: > * Bus `NVIDIA i2c adapter 3 at 1:00.0' > Busdriver `UNKNOWN', I2C address 0x70 > Chip `Philips Semiconductors PCA9540' (confidence: 1) > > Driver `it87' (should be inserted): > Detects correctly: > * ISA bus address 0x0290 (Busdriver `i2c-isa') > Chip `ITE IT8718F Super IO Sensors' (confidence: 9) > > I will now generate the commands needed to load the required modules. > Just press ENTER to continue: > > To make the sensors modules behave correctly, add these lines to > /etc/modprobe.conf: > > #----cut here---- > # I2C module options > alias char-major-89 i2c-dev > #----cut here---- > > To load everything that is needed, add this to some /etc/rc* file: > > #----cut here---- > # I2C adapter drivers > modprobe i2c-i801 > # modprobe unknown adapter NVIDIA i2c adapter 0 at 1:00.0 > # modprobe unknown adapter NVIDIA i2c adapter 1 at 1:00.0 > # modprobe unknown adapter NVIDIA i2c adapter 2 at 1:00.0 > # modprobe unknown adapter NVIDIA i2c adapter 3 at 1:00.0 > # Chip drivers > modprobe eeprom > # no driver for Analog Devices ADT7473 yet > # Warning: the required module pca9540 is not currently installed > # on your system. For status of 2.6 kernel ports check > # http://www.lm-sensors.org/wiki/Devices. If driver is built > # into the kernel, or unavailable, comment out the following line. > modprobe pca9540 > modprobe it87 > # sleep 2 # optional > /usr/bin/sensors -s # recommended > #----cut here---- > > If you have some drivers built into your kernel, the list above will > contain too many modules. Skip the appropriate ones! You really > should try these commands right now to make sure everything is > working properly. Monitoring programs won't work until the needed > modules are loaded. > > Do you want to overwrite /etc/sysconfig/lm_sensors? (YES/no): n I don't overwrite here because I've set /etc/sysconfig/lm_sensors myself as follows... > MODULE_0=i2c-i801 > MODULE_1=eeprom > MODULE_2=it87 I deleted pca9540 from the autogenerated list because it wasn't recognised when I tried to manually modprobe it. See below: > linux-home:~ # modprobe pca9540 > FATAL: Module pca9540 not found. Here is the result of the config check... > linux-home:~ # chkconfig -a lm_sensors > lm_sensors 0:off 1:off 2:on 3:on 4:off 5:on 6:off I notice that my /etc/fancontrol is missing Can anyone help please?!!!!
