Fix the writing of the temperature interrupt configuration. The old code was working only by accident. Signed-off-by: Jean Delvare <khali at linux-fr.org> --- drivers/hwmon/via686a.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) --- linux-2.6.22-rc3.orig/drivers/hwmon/via686a.c 2007-05-30 17:28:39.000000000 +0200 +++ linux-2.6.22-rc3/drivers/hwmon/via686a.c 2007-05-30 17:30:09.000000000 +0200 @@ -740,9 +740,10 @@ static void via686a_init_client(struct i via686a_write_value(client, VIA686A_REG_CONFIG, (reg|0x01)&0x7F); /* Configure temp interrupt mode for continuous-interrupt operation */ + reg = via686a_read_value(client, VIA686A_REG_TEMP_MODE); via686a_write_value(client, VIA686A_REG_TEMP_MODE, - via686a_read_value(client, VIA686A_REG_TEMP_MODE) & - !(VIA686A_TEMP_MODE_MASK | VIA686A_TEMP_MODE_CONTINUOUS)); + (reg & ~VIA686A_TEMP_MODE_MASK) + | VIA686A_TEMP_MODE_CONTINUOUS); } static struct via686a_data *via686a_update_device(struct device *dev) -- Jean Delvare
