I'm having a problem fixing all of these elements. Mostly, I need the temperature to work correctly. Not to mention, the alarms aren't necessarily going off when they should be, only one of the fans is working and the BIOS has all 4 fans working, and a few other minor things.. kernel - 2.6.9-55 w83627hf-isa-0c00 Adapter: ISA adapter VCore 1: +1.55 V (min = +1.26 V, max = +1.39 V) VCore 2: +1.31 V (min = +1.26 V, max = +1.39 V) +3.3V: +3.33 V (min = +3.14 V, max = +3.47 V) +5V: +4.97 V (min = +4.76 V, max = +5.24 V) +12V: +4.99 V (min = +10.82 V, max = +13.19 V) -12V: -1.42 V (min = -13.18 V, max = -10.80 V) -5V: -3.94 V (min = -5.25 V, max = -4.75 V) V5SB: +5.54 V (min = +4.76 V, max = +5.24 V) VBat: +3.28 V (min = +2.40 V, max = +3.60 V) fan1: 0 RPM (min = 21093 RPM, div = 4) fan2: 2576 RPM (min = 2986 RPM, div = 4) fan3: 0 RPM (min = 21093 RPM, div = 4) temp1: +127?C (high = +80?C, hyst = +75?C) sensor = diode temp2: +127.5?C (high = +80?C, hyst = +75?C) sensor = diode ALARM temp3: +127.5?C (high = +80?C, hyst = +75?C) sensor = diode ALARM vid: +1.325 V (VRM Version 8.5) alarms: beep_enable: Sound alarm enabled dmesg: SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB) SCSI device sda: drive cache: write back SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 < sda5 > Attached scsi disk sda at scsi2, channel 0, id 0, lun 0 Vendor: ATA Model: WDC WD740GD-00FL Rev: 31.0 Type: Direct-Access ANSI SCSI revision: 05 ata4: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB) SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 Attached scsi disk sdb at scsi3, channel 0, id 0, lun 0 device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel at redhat.com cdrom: open failed. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. security: 3 users, 4 roles, 355 types, 26 bools security: 55 classes, 22610 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), not configured for labeling SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts inserting floppy driver for 2.6.9-55.ELsmp Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.42-rh. ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 21 (level, high) -> IRQ 193 PCI: Setting latency timer of device 0000:00:0a.0 to 64 divert: allocating divert_blk for eth0 eth0: forcedeth.c: subsystem: 010f1:2877 bound to 0000:00:0a.0 ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 20 (level, high) -> IRQ 201 PCI: Setting latency timer of device 0000:00:04.0 to 64 intel8x0_measure_ac97_clock: measured 50002 usecs intel8x0: clocking to 46755 MC: drivers/edac/edac_mc.c version MC $Revision: 1.3 $ MC0: Giving out device to k8_edac Athlon64/Opteron: PCI 0000:00:18.2 (0000:00:18.2) MC1: Giving out device to k8_edac Athlon64/Opteron: PCI 0000:00:19.2 (0000:00:19.2) ACPI: PCI Interrupt 0000:00:02.1[B] -> GSI 21 (level, high) -> IRQ 193 ehci_hcd 0000:00:02.1: EHCI Host Controller PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: irq 193, pci mem f88f0000 SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 22 (level, high) -> IRQ 185 ohci_hcd 0000:00:02.0: OHCI Host Controller PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: irq 185, pci mem f8926000 ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. usb 2-1: new low speed USB device using address 2 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-1 ACPI: Power Button (FF) [PWRF] EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sdb1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sdb1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] parport0: irq 7 detected ip_tables: (C) 2000-2002 Netfilter core team ip_tables: (C) 2000-2002 Netfilter core team SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts NET: Registered protocol family 10 Disabled Privacy Extensions on device c0346240(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] parport0: irq 7 detected lp0: using parport0 (polling). lp0: console ready eth0: no IPv6 routers present nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, high) -> IRQ 217 PCI: Setting latency timer of device 0000:05:00.0 to 64 NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9631 Thu Nov 9 17:38:10 PST 2006 SELinux: initialized (dev 0:17, type nfs), uses genfs_contexts w83627hf 0-0c00: Invalid sensor type 8; must be 1, 2, or 3435 w83627hf 0-0c00: Invalid sensor type 8; must be 1, 2, or 3435 w83627hf 0-0c00: Invalid sensor type 8; must be 1, 2, or 3435 lockd: couldn't shutdown host module! SELinux: initialized (dev 0:17, type nfs), uses genfs_contexts w83627hf 0-0c00: Invalid sensor type 3; must be 1, 2, or 3435 w83627hf 0-0c00: Invalid sensor type 3; must be 1, 2, or 3435 w83627hf 0-0c00: Invalid sensor type 3; must be 1, 2, or 3435 i2c /dev entries driver [root at diopter ~]# clear [root at diopter ~]# dmesg Linux version 2.6.9-55.ELsmp (brewbuilder at ls20-bc2-14.build.redhat.com) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #1 SMP Fri Apr 20 17:03:35 EDT 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 0000000000094800 (usable) BIOS-e820: 0000000000094800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000c2000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ff20000 (usable) BIOS-e820: 000000007ff20000 - 000000007ff2c000 (ACPI data) BIOS-e820: 000000007ff2c000 - 000000007ff80000 (ACPI NVS) BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 1151MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f73f0 NX (Execute Disable) protection: active On node 0 totalpages: 524064 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 294688 pages, LIFO batch:16 DMI present. Using APIC driver default ACPI: RSDP (v000 PTLTD ) @ 0x000f73c0 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x7ff2849d ACPI: FADT (v001 NVIDIA CK8S 0x06040000 PTL_ 0x000f4240) @ 0x7ff2bbe8 ACPI: SRAT (v001 AMD HAMMER 0x06040000 AMD 0x00000001) @ 0x7ff2bc5c ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0x7ff2bd24 ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x7ff2bd74 ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0x7ff2bdd2 ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x7ff2be0e ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x7ff2be36 ACPI: DSDT (v001 NVIDIA CK8 0x06040000 MSFT 0x0100000e) @ 0x00000000 Nvidia board detected. Ignoring ACPI timer override. ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:5 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:5 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) Enabling APIC mode: Flat. Using 0 I/O APICs ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) Built 1 zonelists Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet mapped APIC to ffffd000 (fee00000) Initializing CPU#0 CPU 0 irqstacks, hard=c03f1000 soft=c03d1000 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 2210.369 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2072088k/2096256k available (1882k kernel code, 23108k reserved, 761k data, 188k init, 1178752k highmem) Calibrating delay using timer specific routine.. 4424.00 BogoMIPS (lpj=2212004) Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 CPU: After vendor identify, caps: 078bfbff e1d3fbff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000410 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: AMD Opteron(tm) Processor 248 stepping 0a per-CPU timeslice cutoff: 2924.52 usecs. task migration cache decay timeout: 2 msecs. Booting processor 1/1 eip 3000 CPU 1 irqstacks, hard=c03f2000 soft=c03d2000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4419.76 BogoMIPS (lpj=2209880) CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 CPU: After vendor identify, caps: 078bfbff e1d3fbff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000410 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: AMD Opteron(tm) Processor 248 stepping 0a Total of 2 processors activated (8843.76 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=0 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs zapping low mappings. checking if image is initramfs... it is Freeing initrd memory: 1131k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd761, last bus=5 PCI: Using MMCONFIG mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040816 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR3._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19) *0 ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19) *0 ACPI: PCI Interrupt Link [LNK5] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [LSI1] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:01.1[A] -> GSI 23 (level, high) -> IRQ 177 ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 22 (level, high) -> IRQ 185 ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:02.1[B] -> GSI 21 (level, high) -> IRQ 193 ACPI: PCI Interrupt Link [LACI] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 20 (level, high) -> IRQ 201 ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 23 (level, high) -> IRQ 177 ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 22 (level, high) -> IRQ 185 ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 21 (level, high) -> IRQ 193 ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 19 ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 19 (level, high) -> IRQ 209 ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 18 ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, high) -> IRQ 217 PCI: Device 00:50 not found by BIOS Simple Boot Flag at 0x36 set to 0x1 apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1180448538.151:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 3629C5F482105A7 - User ID: Red Hat, Inc. (Kernel Module GPG key) PCI: Found HT MSI mapping on 0000:00:0b.0 with capability disabled PCI: Found HT MSI mapping on 0000:00:00.0 with capability enabled PCI: Found HT MSI mapping on 0000:00:0c.0 with capability disabled PCI: Found HT MSI mapping on 0000:00:00.0 with capability enabled PCI: Found HT MSI mapping on 0000:00:0d.0 with capability disabled PCI: Found HT MSI mapping on 0000:00:00.0 with capability enabled PCI: Found HT MSI mapping on 0000:00:0e.0 with capability disabled PCI: Found HT MSI mapping on 0000:00:00.0 with capability enabled pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU0] (supports C1) ACPI: Processor [CPU1] (supports C1) Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 NFORCE-CK804: chipset revision 162 NFORCE-CK804: not 100% native mode: will probe irqs later NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller ide0: BM-DMA at 0x1c00-0x1c07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1c08-0x1c0f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: SONY DVD RW DW-Q30A, ATAPI CD/DVD-ROM drive Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 262144 (order: 9, 3145728 bytes) TCP: Hash tables configured (established 262144 bind 262144) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI wakeup devices: PCI0 COM1 COM2 PS2M PS2K USB0 USB2 MAC0 P2P0 ACPI: (supports S0 S1 S4 S5) Freeing unused kernel memory: 188k freed SCSI subsystem initialized libata version 2.00 loaded. sata_nv 0000:00:07.0: version 3.2 ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 23 (level, high) -> IRQ 177 sata_nv 0000:00:07.0: Using ADMA mode PCI: Setting latency timer of device 0000:00:07.0 to 64 ata1: SATA max UDMA/133 cmd 0xF881A480 ctl 0xF881A4A0 bmdma 0x1C10 irq 177 ata2: SATA max UDMA/133 cmd 0xF881A580 ctl 0xF881A5A0 bmdma 0x1C18 irq 177 scsi0 : sata_nv ata1: SATA link down (SStatus 0 SControl 300) scsi1 : sata_nv ata2: SATA link down (SStatus 0 SControl 300) ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 22 (level, high) -> IRQ 185 sata_nv 0000:00:08.0: Using ADMA mode PCI: Setting latency timer of device 0000:00:08.0 to 64 ata3: SATA max UDMA/133 cmd 0xF881C480 ctl 0xF881C4A0 bmdma 0x1C20 irq 185 ata4: SATA max UDMA/133 cmd 0xF881C580 ctl 0xF881C5A0 bmdma 0x1C28 irq 185 scsi2 : sata_nv ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATA-6, max UDMA/133, 145226112 sectors: LBA48 ata3.00: ata3: dev 0 multi count 16 ata3.00: configured for UDMA/133 scsi3 : sata_nv ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: ATA-6, max UDMA/133, 145226112 sectors: LBA48 ata4.00: ata4: dev 0 multi count 16 ata4.00: configured for UDMA/133 Vendor: ATA Model: WDC WD740GD-00FL Rev: 31.0 Type: Direct-Access ANSI SCSI revision: 05 ata3: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB) SCSI device sda: drive cache: write back SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 < sda5 > Attached scsi disk sda at scsi2, channel 0, id 0, lun 0 Vendor: ATA Model: WDC WD740GD-00FL Rev: 31.0 Type: Direct-Access ANSI SCSI revision: 05 ata4: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB) SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 Attached scsi disk sdb at scsi3, channel 0, id 0, lun 0 device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel at redhat.com cdrom: open failed. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. security: 3 users, 4 roles, 355 types, 26 bools security: 55 classes, 22610 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), not configured for labeling SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts inserting floppy driver for 2.6.9-55.ELsmp Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.42-rh. ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 21 (level, high) -> IRQ 193 PCI: Setting latency timer of device 0000:00:0a.0 to 64 divert: allocating divert_blk for eth0 eth0: forcedeth.c: subsystem: 010f1:2877 bound to 0000:00:0a.0 ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 20 (level, high) -> IRQ 201 PCI: Setting latency timer of device 0000:00:04.0 to 64 intel8x0_measure_ac97_clock: measured 50002 usecs intel8x0: clocking to 46755 MC: drivers/edac/edac_mc.c version MC $Revision: 1.3 $ MC0: Giving out device to k8_edac Athlon64/Opteron: PCI 0000:00:18.2 (0000:00:18.2) MC1: Giving out device to k8_edac Athlon64/Opteron: PCI 0000:00:19.2 (0000:00:19.2) ACPI: PCI Interrupt 0000:00:02.1[B] -> GSI 21 (level, high) -> IRQ 193 ehci_hcd 0000:00:02.1: EHCI Host Controller PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: irq 193, pci mem f88f0000 SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 22 (level, high) -> IRQ 185 ohci_hcd 0000:00:02.0: OHCI Host Controller PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: irq 185, pci mem f8926000 ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. usb 2-1: new low speed USB device using address 2 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-1 ACPI: Power Button (FF) [PWRF] EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sdb1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sdb1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] parport0: irq 7 detected ip_tables: (C) 2000-2002 Netfilter core team ip_tables: (C) 2000-2002 Netfilter core team SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts NET: Registered protocol family 10 Disabled Privacy Extensions on device c0346240(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] parport0: irq 7 detected lp0: using parport0 (polling). lp0: console ready eth0: no IPv6 routers present nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, high) -> IRQ 217 PCI: Setting latency timer of device 0000:05:00.0 to 64 NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9631 Thu Nov 9 17:38:10 PST 2006 SELinux: initialized (dev 0:17, type nfs), uses genfs_contexts w83627hf 0-0c00: Invalid sensor type 8; must be 1, 2, or 3435 w83627hf 0-0c00: Invalid sensor type 8; must be 1, 2, or 3435 w83627hf 0-0c00: Invalid sensor type 8; must be 1, 2, or 3435 lockd: couldn't shutdown host module! SELinux: initialized (dev 0:17, type nfs), uses genfs_contexts w83627hf 0-0c00: Invalid sensor type 3; must be 1, 2, or 3435 w83627hf 0-0c00: Invalid sensor type 3; must be 1, 2, or 3435 w83627hf 0-0c00: Invalid sensor type 3; must be 1, 2, or 3435 i2c /dev entries driver lsmod: Module Size Used by i2c_dev 14529 0 i2c_nforce2 10177 0 nfs 217769 1 lockd 65769 2 nfs nfs_acl 7745 1 nfs nvidia 4719636 22 parport_pc 28033 1 lp 15661 0 parport 38025 2 parport_pc,lp md5 8129 1 ipv6 243425 14 autofs4 25285 4 sunrpc 143909 6 nfs,lockd,nfs_acl w83627hf 29417 0 eeprom 12513 0 lm90 16621 0 i2c_sensor 7617 3 w83627hf,eeprom,lm90 i2c_isa 6209 0 i2c_core 26049 8 i2c_dev,i2c_nforce2,nvidia,w83627hf,eeprom,lm90,i2c_sensor,i2c_isa button 10705 0 battery 12997 0 ac 8901 0 ohci_hcd 24273 0 ehci_hcd 32325 0 k8_edac 18277 0 edac_mc 20185 1 k8_edac snd_intel8x0 35049 2 snd_ac97_codec 65425 1 snd_intel8x0 snd_pcm_oss 52729 0 snd_mixer_oss 21953 2 snd_pcm_oss snd_pcm 92357 2 snd_intel8x0,snd_pcm_oss snd_timer 28229 1 snd_pcm snd_page_alloc 13897 2 snd_intel8x0,snd_pcm snd_mpu401_uart 11457 1 snd_intel8x0 snd_rawmidi 28005 1 snd_mpu401_uart snd_seq_device 12105 1 snd_rawmidi snd 57509 11 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device soundcore 13089 2 snd forcedeth 24641 0 floppy 58193 0 dm_snapshot 21093 0 dm_zero 6337 0 dm_mirror 31173 0 ext3 119113 2 jbd 59609 1 ext3 dm_mod 64617 8 dm_snapshot,dm_zero,dm_mirror sata_nv 22341 0 libata 105757 1 sata_nv sd_mod 20545 3 scsi_mod 119757 2 libata,sd_mod sensors-detect Driver `adm1021' (may not be inserted): Misdetects: * Bus `NVIDIA i2c adapter 2 at 5:00.0' Busdriver `UNKNOWN', I2C address 0x4c Chip `Maxim MAX1617' (confidence: 3) Driver `lm90' (should be inserted): Detects correctly: * Bus `NVIDIA i2c adapter 2 at 5:00.0' Busdriver `UNKNOWN', I2C address 0x4c Chip `National Semiconductor LM89/LM99' (confidence: 8) Driver `eeprom' (should be inserted): Detects correctly: * Bus `NVIDIA i2c adapter 1 at 5:00.0' Busdriver `UNKNOWN', I2C address 0x50 (and 0x51 0x52 0x53 0x54 0x55 0x56 0x57) Chip `EDID EEPROM' (confidence: 8) EEPROMs are *NOT* sensors! They are data storage chips commonly found on memory modules (SPD), in monitors (EDID), or in some laptops, for example. Driver `w83627hf' (should be inserted): Detects correctly: * ISA bus, address 0xc00 (Busdriver `i2c-isa') Chip `Winbond W83627HF Super IO Sensors' (confidence: 9) Driver `k8temp' (should be inserted): Detects correctly: * Chip `AMD K8 thermal sensors' (confidence: 9) lspci -n 00:00.0 Class 0580: 10de:005e (rev a3) 00:01.0 Class 0601: 10de:0051 (rev a3) 00:01.1 Class 0c05: 10de:0052 (rev a2) 00:02.0 Class 0c03: 10de:005a (rev a2) 00:02.1 Class 0c03: 10de:005b (rev a3) 00:04.0 Class 0401: 10de:0059 (rev a2) 00:06.0 Class 0101: 10de:0053 (rev a2) 00:07.0 Class 0101: 10de:0054 (rev a3) 00:08.0 Class 0101: 10de:0055 (rev a3) 00:09.0 Class 0604: 10de:005c (rev a2) 00:0a.0 Class 0200: 10de:0057 (rev a3) 00:0b.0 Class 0604: 10de:005d (rev a3) 00:0c.0 Class 0604: 10de:005d (rev a3) 00:0d.0 Class 0604: 10de:005d (rev a3) 00:0e.0 Class 0604: 10de:005d (rev a3) 00:18.0 Class 0600: 1022:1100 00:18.1 Class 0600: 1022:1101 00:18.2 Class 0600: 1022:1102 00:18.3 Class 0600: 1022:1103 00:19.0 Class 0600: 1022:1100 00:19.1 Class 0600: 1022:1101 00:19.2 Class 0600: 1022:1102 00:19.3 Class 0600: 1022:1103 01:05.0 Class 0c00: 104c:8023 05:00.0 Class 0300: 10de:00f8 (rev a2)