Hi Jan, Thanks. Jan van Tiggelen wrote: > Curt, hi,- > > Assuming that you've figured out a correct setting for your FAN divisors, > last thing left to do is setting right labels and Vin calculation for the > other channels. The divisors were ok out of the box, I was just trying to change 4 & 5 to see if there where fans connected before I had the schematic and it showed there were no fans connected. > > So, based on your feedback of voltage levels, and with the schematics of the > MSI K9N4 SLI-F and the pre-set definitions of the W83627EHF calculations I > could suggest for sensors.conf: > > chip "w83627dhg-*" > > labels: > label in0 "VCore" > label in1 "+12V" > label in2 "5V" > label in3 "-12V" > label in5 "AVCC" > label in7 "VSB" > label in8 "VBAT" > > computations: > compute in1 @*(1+(56/10)), @/(1+(56/10)) > compute in2 @*(1+(22/10)), @/(1+(22/10)) > compute in3 -@*(1+(56/10)), -@/(1+(56/10)) > > Let me know if this gives you the correct readings. If it's not, I'll try > and get the values for Rin and Rf. I'll give this a try. > > And for the FAN labels: > Label fan3 "Northbridge Fan" I did already. :) > > > Honestly speaking: for the voltage computations I lost track a bit, since > 627EH is derived from 781D in turn... > Maybe you could post a better update, with the mainboard on hand? Ok, but what do you mean by a better update? And MB on hand? Here's the results of plugging in your equations: w83627dhg-isa-0a10 Adapter: ISA adapter VCore: +1.23 V (min = +0.00 V, max = +1.74 V) +12V: +12.30 V (min = +6.97 V, max = +5.23 V) 5V: +10.44 V (min = +7.48 V, max = +10.75 V) -12V: -21.54 V (min = -5.91 V, max = -18.27 V) in4: +1.54 V (min = +1.23 V, max = +0.02 V) AVCC: +1.46 V (min = +0.24 V, max = +0.78 V) in6: +1.61 V (min = +0.17 V, max = +0.53 V) VSB: +3.26 V (min = +2.18 V, max = +2.26 V) VBAT: +2.99 V (min = +2.08 V, max = +0.86 V) -Curt > > Kind regards, > > Jan van Tiggelen > > > _______________________________________________ > lm-sensors mailing list > lm-sensors at lm-sensors.org > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
