On Friday 05 January 2007 14:19, Rudolf Marek <r.marek at assembler.cz> wrote:
> You may use the 2.6.19. Or a patch for earlier versions. Maybe it will apply
> to previus recent kernels too. Can you use 2.6.19 or need any earlier
> kernels?
Had to go with 2.6.20-rc3. 2.6.19 doesn't have the w83793 driver in it. The
output of sensors looks good for the w83793, just need to add a few "ignores"
to sensors.conf for the bits of hardware that don't exist in this chasis. The
output for the w83627hf that sensors-detect finds looks off, though (see
below). SuperMicro didn't mention anything about it.
[offset values snipped]
> > Windbond W83792D, Slave Address=0x2e (0x5C in 8-Bit format)
> > =============================================================
> > Chassis Intrusion, Offset 0xaa, BitMask 0x20
>
> Wow I dont believe this. I think it must be wrong... Why to put there the
> other chip just for this... Please can you run there a sensors-detect and
> post it here?
Here we are. No W83792D found.
Probing for `Winbond W83792D'... No
[snip]
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `w83781d' (should be inserted):
Detects correctly:
* Bus `SMBus I801 adapter at 1100'
Busdriver `i2c-i801', I2C address 0x2d
Chip `w83627hf' (confidence: 6)
* Bus `SMBus I801 adapter at 1100'
Busdriver `i2c-i801', I2C address 0x48
Chip `w83627hf subclient' (confidence: 6)
* Bus `SMBus I801 adapter at 1100'
Busdriver `i2c-i801', I2C address 0x49
Chip `w83627hf subclient' (confidence: 6)
* ISA bus address 0x0290 (Busdriver `i2c-isa')
Chip `Winbond W83627HF' (confidence: 8)
Driver `w83793' (should be inserted):
Detects correctly:
* Bus `SMBus I801 adapter at 1100'
Busdriver `i2c-i801', I2C address 0x2f
Chip `Winbond W83793R/G' (confidence: 8)
Driver `w83627hf' (should be inserted):
Detects correctly:
* ISA bus address 0x0295 (Busdriver `i2c-isa')
Chip `Winbond W83627HF Super IO Sensors' (confidence: 9)
`sensors` says:
w83627hf-i2c-0-2d
Adapter: SMBus I801 adapter at 1100
in0: +4.08 V (min = +0.00 V, max = +4.08 V)
in1: +4.08 V (min = +0.00 V, max = +4.08 V)
in2: +4.08 V (min = +2.82 V, max = +3.79 V) ALARM
in3: +3.09 V (min = +2.82 V, max = +3.12 V)
in4: +3.04 V (min = +2.85 V, max = +3.47 V)
in5: +3.09 V (min = +0.34 V, max = +0.78 V) ALARM
in6: +3.09 V (min = +0.78 V, max = +0.94 V) ALARM
in7: +3.38 V (min = +2.82 V, max = +3.12 V) ALARM
in8: +0.06 V (min = +2.40 V, max = +3.60 V) ALARM
fan1: 0 RPM (min = 0 RPM, div = 2)
fan2: 0 RPM (min = 0 RPM, div = 2)
fan3: 0 RPM (min = 0 RPM, div = 2)
temp1: -48?C (high = -1?C, hyst = -3?C) sensor = thermistor
temp2: -48.0?C (high = +80?C, hyst = +75?C) sensor = thermistor
temp3: -48.0?C (high = +80?C, hyst = +75?C) sensor = thermistor
vid: +0.000 V (VRM Version 10.0)
alarms:
beep_enable:
Sound alarm enabled
w83627hf-isa-0290
Adapter: ISA adapter
in0: +4.08 V (min = +0.00 V, max = +4.08 V)
in1: +4.08 V (min = +0.00 V, max = +4.08 V)
in2: +4.08 V (min = +2.82 V, max = +3.79 V) ALARM
in3: +3.04 V (min = +2.82 V, max = +3.12 V)
in4: +3.04 V (min = +2.85 V, max = +3.47 V)
in5: +3.09 V (min = +0.34 V, max = +0.78 V) ALARM
in6: +3.07 V (min = +0.78 V, max = +0.94 V) ALARM
in7: +3.39 V (min = +2.82 V, max = +3.12 V) ALARM
in8: +0.06 V (min = +2.40 V, max = +3.60 V) ALARM
fan1: 0 RPM (min = 0 RPM, div = 2)
fan2: 0 RPM (min = 0 RPM, div = 2)
fan3: 0 RPM (min = 0 RPM, div = 2)
temp1: -48?C (high = -1?C, hyst = -3?C) sensor = thermistor
temp2: -48.0?C (high = +80?C, hyst = +75?C) sensor = thermistor
temp3: -48.0?C (high = +80?C, hyst = +75?C) sensor = thermistor
vid: +0.000 V (VRM Version 10.0)
alarms:
beep_enable:
Sound alarm enabled
w83793-i2c-0-2f
Adapter: SMBus I801 adapter at 1100
VCoreA: +1.22 V (min = +0.92 V, max = +1.49 V)
VCoreB: +1.26 V (min = +0.92 V, max = +1.49 V)
-12V: +1.49 V (min = +1.34 V, max = +1.65 V)
+1.5V: +3.30 V (min = +2.96 V, max = +3.63 V)
+3.3V: +11.90 V (min = +10.75 V, max = +13.25 V)
+12V: +4.97 V (min = +4.49 V, max = +5.50 V)
+5V: +4.92 V (min = +4.49 V, max = +5.50 V)
5VSB: +3.25 V (min = +2.99 V, max = +3.66 V)
fan1: 0 RPM (min = 712 RPM) ALARM
fan2: 4981 RPM (min = 712 RPM)
fan3: 5192 RPM (min = 712 RPM)
fan4: 4821 RPM (min = 712 RPM)
fan5: 0 RPM (min = 712 RPM) ALARM
fan6: 0 RPM (min = 712 RPM) ALARM
fan7: 0 RPM (min = 712 RPM) ALARM
fan8: 0 RPM (min = 712 RPM) ALARM
fan9: 0 RPM (min = 712 RPM) ALARM
fan10: 0 RPM (min = 712 RPM) ALARM
CPU1 Temp: +24.8?C (high = +80.0?C, hyst = +75.0?C)
CPU2 Temp: +23.8?C (high = +80.0?C, hyst = +75.0?C)
temp3: +24.8?C (high = +80.0?C, hyst = +75.0?C)
temp4: +24.8?C (high = +80.0?C, hyst = +75.0?C)
temp5: +28?C (high = +50?C, hyst = +45?C)
temp6: +92?C (high = +100?C, hyst = +95?C)
cpu0_vid: +1.075 V (VRM Version 10.0)
cpu1_vid: +0.000 V (VRM Version 10.0)
Thanks,
Noah
--
Noah Romer <nromer at arcmailtech.com>
GPG Key Fingerprint: 944E C2F8 EBEC BCC7 EEA9 9381 1B21 0098 CC8D 45BA
