Hello, What does this error mean? Here's the output: ---------------------------------------------------------------------------------- root at storage02:/usr/share/doc/lm-sensors# sensors bmc-i2c--1209221748-bfb9a7e8 ERROR: Can't get adapter or algorithm?!? in1: +1.30 V (min = +0.00 V, max = +0.00 V) in2: +0.07 V (min = +0.00 V, max = +0.00 V) in3: +0.07 V (min = +0.81 V, max = +0.98 V) in4: +0.13 V (min = +10.42 V, max = +13.58 V) in5: +11.59 V (min = +4.45 V, max = +5.56 V) in6: +4.99 V (min = +1.36 V, max = +1.64 V) in7: +1.50 V (min = +3.03 V, max = +3.61 V) in8: +3.29 V (min = +2.94 V, max = +3.68 V) in9: +3.32 V (min = +1.64 V, max = +1.99 V) in10: +1.97 V (min = +1.33 V, max = +1.68 V) fan1: 0 RPM (min = 330 RPM) fan2: 0 RPM (min = 1221 RPM) fan3: 0 RPM (min = 1221 RPM) temp1: +0.0??C (high = +0??C, hyst = +2??C) temp2: +0.0??C (high = +0??C, hyst = +2??C) temp3: +772.2??C (high = +50??C, hyst = +0??C) temp4: +0.0??C (high = +50??C, hyst = +0??C) temp5: +1190.0??C (high = +48??C, hyst = +2??C) temp6: +0.0??C (high = +66??C, hyst = +2??C) ------------------------------------------------------------------------------ Also, how can I make each of the entries be more human-readable? Is there a spec sheet that I can look this up in for my board? Thanks! Andrey.
