Hi Rudolf,
On Wed, 30 Aug 2006 16:10:25 +0200, Rudolf Marek wrote:
> Jean, this is the final version of the driver. It contains device_create... /
> device_remove... stuff. There is no change after w83793_revise_6.patch, which
> was the last one.
>
> This patch adds support for the W83793 hardware monitoring driver. This driver
> was contributed by Yuan Mu of Winbond Electronics Corp.
>
> Signed-off-by: Yuan Mu <ymu at winbond.com>
> Signed-off-by: Rudolf Marek <r.marek at sh.cvut.cz>
>
> The documentation patch will follow. Despite countless of hours I spent
> reviewing the driver I'm not sure if I caught everything and I probably never
> know ;) The driver was tested on real hardware and also with the help of
> i2c-stub, I concentrated on not-used inputs on Yuan MB, as well as different fan
> configurations. As far I know everything works fine. So I think there should not
> be and problem with basic info from fans, temps and voltages. Yuan did also
> independent testing so I think we at least know that the driver has no major
> issue that would be a show stopper. The driver was run through indent so there
> should not be any forgotten spaces, nor too long lines etc etc...
Sorry for the delay. I finally had the time to review the driver
yesterday in the train back home. It took me all the three hours of the
trip. Given the complexity of the driver, I am rather happy with the
overall result, it looks good. See the detail of my objections below. I
tried to limit myself to what really matters, for a change, so as to
not further delay the merging of the driver.
> diff -uprN linux-2.6.18-rc2/drivers/hwmon/w83793.c linux-2.6.18-rc2-patched/drivers/hwmon/w83793.c
> --- linux-2.6.18-rc2/drivers/hwmon/w83793.c 1970-01-01 01:00:00.000000000 +0100
> +++ linux-2.6.18-rc2-patched/drivers/hwmon/w83793.c 2006-08-27 12:49:41.000000000 +0200
> @@ -0,0 +1,1579 @@
> +/*
> + w83793.c - Linux kernel modules for hardware monitoring
s/modules/driver/
> + Copyright (C) 2006 Winbond Electronics Corp.
> + Yuan Mu <ymu at winbond.com>
Drop e-mail address.
Maybe you can add your name here as well, you did much work on this
driver too.
> +
> + This program is free software; you can redistribute it and/or modify
> + it under the terms of the GNU General Public License as published by
> + the Free Software Foundation; either version 2 of the License, or
> + (at your option) any later version.
The kernel is version 2 only.
> +
> + This program is distributed in the hope that it will be useful,
> + but WITHOUT ANY WARRANTY; without even the implied warranty of
> + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + GNU General Public License for more details.
> +
> + You should have received a copy of the GNU General Public License
> + along with this program; if not, write to the Free Software
> + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
> + 02110-1301 USA.
> +*/
> +
> +/*
> + Supports following chips:
> +
> + Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
> + w83793 10 12 8 6 0x7b 0x5ca3 yes no
Listing i2c/isa doesn't seem very useful.
> +*/
> +
> +#include <linux/config.h>
This file no longer exists.
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/slab.h>
> +#include <linux/i2c.h>
> +#include <linux/hwmon.h>
> +#include <linux/hwmon-vid.h>
> +#include <linux/hwmon-sysfs.h>
> +#include <linux/err.h>
> +#include <linux/mutex.h>
> +
> +/* Addresses to scan */
> +static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END };
> +
> +/* Insmod parameters */
> +I2C_CLIENT_INSMOD_1(w83793);
> +I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: "
> + "{bus, clientaddr, subclientaddr1, subclientaddr2}");
> +
> +static int reset;
> +module_param(reset, bool, 0);
> +MODULE_PARM_DESC(reset, "Set to 1 to reset chip, not recommended");
> +
> +/*
> + Address 0x00, 0x0d, 0x0e, 0x0f in all three banks are reserved
> + as ID, Bank Select registers
> +*/
> +#define W83793_REG_BANKSEL 0x00
> +#define W83793_REG_VENDORID 0x0d
> +#define W83793_REG_CHIPID 0x0e
> +#define W83793_REG_DEVICEID 0x0f
> +
> +#define W83793_REG_CONFIG 0x40
> +#define W83793_REG_MFC 0x58
> +#define W83793_REG_FANIN_CTRL 0x5c
> +#define W83793_REG_FANIN_SEL 0x5d
> +#define W83793_REG_I2C_ADDR 0x0b
> +#define W83793_REG_I2C_SUBADDR 0x0c
> +#define W83793_REG_VID_INA 0x05
> +#define W83793_REG_VID_INB 0x06
> +#define W83793_REG_VID_LATCHA 0x07
> +#define W83793_REG_VID_LATCHB 0x08
> +#define W83793_REG_VID_CTRL 0x59
> +
> +static u16 W83793_REG_TEMP_MODE[2] = { 0x5e, 0x5f };
> +
> +#define TEMP_READ 0
> +#define TEMP_CRIT 1
> +#define TEMP_CRIT_HYST 2
> +#define TEMP_WARN 3
> +#define TEMP_WARN_HYST 4
> +/* only crit and crit_hyst affect real-time alarm status
> + read crit crit_hyst warn warn_hyst */
"read" is not very explicit, maybe "current" instead?
> +static u16 W83793_REG_TEMP[][5] = {
> + {0x1c, 0x78, 0x79, 0x7a, 0x7b},
> + {0x1d, 0x7c, 0x7d, 0x7e, 0x7f},
> + {0x1e, 0x80, 0x81, 0x82, 0x83},
> + {0x1f, 0x84, 0x85, 0x86, 0x87},
> + {0x20, 0x88, 0x89, 0x8a, 0x8b},
> + {0x21, 0x8c, 0x8d, 0x8e, 0x8f},
> +};
> +
> +#define W83793_REG_TEMP_LOW_BITS 0x22
> +
> +#define W83793_REG_BEEP(index) (0x53 + (index))
> +#define W83793_REG_ALARM(index) (0x4b + (index))
> +
> +#define W83793_REG_CLR_CHASSIS 0x4a /* SMI MASK4 */
> +#define W83793_REG_IRQ_CTRL 0x50
> +#define W83793_REG_OVT_CTRL 0x51
> +#define W83793_REG_OVT_BEEP 0x52
> +
> +#define IN_READ 0
> +#define IN_MAX 1
> +#define IN_LOW 2
> +static const u16 W83793_REG_IN[][3] = {
> + /* Read, High, Low */
Ditto.
> + {0x10, 0x60, 0x61}, /* Vcore A */
> + {0x11, 0x62, 0x63}, /* Vcore B */
> + {0x12, 0x64, 0x65}, /* Vtt */
> + {0x14, 0x6a, 0x6b}, /* VSEN1 */
> + {0x15, 0x6c, 0x6d}, /* VSEN2 */
> + {0x16, 0x6e, 0x6f}, /* +3VSEN */
> + {0x17, 0x70, 0x71}, /* +12VSEN */
> + {0x18, 0x72, 0x73}, /* 5VDD */
> + {0x19, 0x74, 0x75}, /* 5VSB */
> + {0x1a, 0x76, 0x77}, /* VBAT */
> +};
> +
> +/* Low Bits of Vcore A/B Vtt Read/High/Low */
> +static const u16 W83793_REG_IN_LOW_BITS[] = { 0x1b, 0x68, 0x69 };
> +static u8 scale_in[] = { 2, 2, 2, 16, 16, 16, 8, 24, 24, 16 };
> +
> +#define W83793_REG_FAN(index) (0x23 + 2 * (index)) /* High byte */
> +#define W83793_REG_FAN_MIN(index) (0x90 + 2 * (index)) /* High byte */
> +
> +#define W83793_REG_PWM_DEFAULT 0xb2
> +#define W83793_REG_PWM_ENABLE 0x207
> +#define W83793_REG_PWM_UPTIME 0xc3 /* Unit in 0.1 second */
> +#define W83793_REG_PWM_DOWNTIME 0xc4 /* Unit in 0.1 second */
> +#define W83793_REG_TEMP_CRITICAL 0xc5
> +
> +#define PWM_DUTY 0
> +#define PWM_START 1
> +#define PWM_NONSTOP 2
> +#define W83793_REG_PWM(index, nr) ((((nr) == 0) ? 0xb3 : \
> + (((nr) == 1) ? 0x220 : 0x218)) + (index))
> +
> +/* bit field, fan1 is bit0, fan2 is bit1 ... */
> +#define W83793_REG_TEMP_FAN_MAP(index) (0x201 + (index))
> +#define W83793_REG_TEMP_TOL(index) (0x208 + (index))
> +#define W83793_REG_TEMP_CRUISE(index) (0x210 + (index))
> +#define W83793_REG_PWM_STOP_TIME(index) (0x228 + (index))
> +#define W83793_REG_SF2_TEMP(index, nr) (0x230 + ((index) << 4) + (nr))
> +#define W83793_REG_SF2_PWM(index, nr) (0x238 + ((index) << 4) + (nr))
> +
> +#define WRITE_TO_REG(REG, val, stored_val) \
> + do { \
> + if (w83793_write_value(client, REG, val) >= 0) \
> + stored_val = val; \
> + } while(0)
> +
I don't much like this macro, it makes the code more complex, and adds
inconsistency, as some register writes are not covered (for example
min fan), and read errors are ignored as well. So this "feature" doesn't
look terribly useful, can't we just get rid of it?
> +#define FAN_FROM_REG(val) ((val) == 0 ? -1 :((val) >= 0xfff ? 0 : \
> + (1350000 / (val))))
Negative RPM values don't make much sense. From the user's point of
view, a missing or stuck fan is the same, so returning 0 there should
be OK. Many of our drivers do that already.
> +static inline u16 FAN_TO_REG(long rpm)
> +{
> + if (rpm <= 0)
> + return 0x0fff;
> + return SENSORS_LIMIT((1350000 + (rpm >> 1)) / rpm, 1, 0xffe);
> +}
> +
> +#define TIME_FROM_REG(reg) ((reg) * 100)
> +#define TIME_TO_REG(val) (SENSORS_LIMIT(((val) > 0 ? (val + 50) / 100 \
> + : 0), 0, 0xff))
This needs to be made an inline function, as it is called with
parameters we don't want to evaluate more than once.
> +#define TEMP_FROM_REG(reg) ((reg) * 1000)
Ditto.
> +#define TEMP_TO_REG(val) ((val) == 0 ? 0 : ((val) + ((val) < 0 ? \
> + -500 : 500)) / 1000)
And same here... So, short version: all these conversions
macros should be turned into inline functions to be safe.
> +
> +struct w83793_data {
> + struct i2c_client client;
> + struct i2c_client *lm75[2];
> + struct class_device *class_dev;
> + enum chips type;
Not used anywhere... drop?
> + struct mutex lock;
> + struct mutex update_lock;
These mutexes look essentially redundant. We always hold update_lock
when we take lock (in the read and write functions), except during
initialization, but we don't need to deal with concurrent accesses
during initialization. So I'd suggest dropping lock (then we may rename
update_lock to lock.)
> + char valid; /* !=0 if following fields are valid */
> + unsigned long last_updated; /* In jiffies */
> + unsigned long last_nonvolatile; /* In jiffies, last time we update the
> + nonvolatile registers */
> +
> + u8 bank;
> + u8 vrm;
> + u8 vid[2];
> + u8 in[10][3]; /* Register value, read/high/low */
> + u8 in_low_bits[3]; /* Additional resolution for VCore A/B Vtt */
> +
> + u16 has_fan; /* Only fan1- fan5 has own pins */
> + u16 fan[12]; /* Register value combine */
> + u16 fan_min[12]; /* Register value combine */
> +
> + s8 temp[6][5]; /* current, crit, crit_hyst,warn, warn_hyst */
> + u8 temp_low_bits; /* Additional resolution TD1-TD4 */
> + u8 temp_mode[2]; /* byte 0: Temp D1-D4 mode each has 2 bits
> + byte 1: Temp R1,R2 mode, each has 1 bit */
> + u8 temp_critical; /* All fan will full speed temperature */
What does this comment mean?
> + u8 temp_fan_map[6]; /* Temp controls which pwm fan, bit field */
> +
> + u8 has_pwm;
> + u8 pwm_enable; /* Register value, each Temp has 1 bit */
> + u8 pwm_uptime; /* Register value */
> + u8 pwm_downtime; /* Register value */
> + u8 pwm_default; /* All fan default pwm, next poweron valid */
I don't understand this comment either.
> + u8 pwm[8][3]; /* Register value */
> + u8 pwm_stop_time[8];
> + u8 temp_cruise[6];
> +
> + u8 alarms[5]; /* realtime status registers */
> + u8 beeps[5];
> + u8 beep_enable;
> + u8 tolerance[3]; /* Temp tolerance(Smart Fan I/II) */
> + u8 sf2_pwm[6][7]; /* Smart FanII: Fan duty cycle */
> + u8 sf2_temp[6][7]; /* Smart FanII: Temp level point */
> +};
> +
> +static u8 w83793_read_value(struct i2c_client *client, u16 reg);
> +static int w83793_write_value(struct i2c_client *client, u16 reg, u16 value);
> +static int w83793_attach_adapter(struct i2c_adapter *adapter);
> +static int w83793_detect(struct i2c_adapter *adapter, int address, int kind);
> +static int w83793_detach_client(struct i2c_client *client);
> +static void w83793_init_client(struct i2c_client *client);
> +static void w83793_update_nonvolatile(struct device *dev);
> +static struct w83793_data *w83793_update_device(struct device *dev);
Many of these forward declarations could be avoided by moving the
functions around in the source file. In particular, moving
w83793_read_value and w83793_write_value before sysfs callbacks would
make sense, as they are helper functions. w83793_init_client can be
moved before w83793_detect. w83793_update_nonvolatile doesn't need a
forward declaration, etc.
> +
> +static struct i2c_driver w83793_driver = {
> + .driver = {
> + .name = "w83793",
> + },
Incorrect indentation.
> + .attach_adapter = w83793_attach_adapter,
> + .detach_client = w83793_detach_client,
> +};
> +
> +static ssize_t
> +show_vrm(struct device *dev, struct device_attribute *attr, char *buf)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct w83793_data *data = i2c_get_clientdata(client);
> +
> + return sprintf(buf, "%d\n", data->vrm);
> +}
> +
> +static ssize_t
> +show_vid(struct device *dev, struct device_attribute *attr, char *buf)
> +{
> + struct w83793_data *data = w83793_update_device(dev);
> + struct sensor_device_attribute_2 *sensor_attr =
> + to_sensor_dev_attr_2(attr);
> + int index = sensor_attr->index;
> +
> + return sprintf(buf, "%d\n", vid_from_reg(data->vid[index], data->vrm));
> +}
> +
> +static ssize_t
> +store_vrm(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct w83793_data *data = i2c_get_clientdata(client);
> +
> + data->vrm = simple_strtoul(buf, NULL, 10);
> + return count;
> +}
> +
> +#define ALARM_STATUS 0
> +#define BEEP_ENABLE 1
> +static ssize_t
> +show_alarm_beep(struct device *dev, struct device_attribute *attr, char *buf)
> +{
> + struct w83793_data *data = w83793_update_device(dev);
> + struct sensor_device_attribute_2 *sensor_attr =
> + to_sensor_dev_attr_2(attr);
> + int nr = sensor_attr->nr;
> + int index = sensor_attr->index >> 3;
> + int bit = sensor_attr->index & 0x07;
> + u8 val;
> +
> + if (ALARM_STATUS == nr) {
> + val = (data->alarms[index] >> (bit)) & 1;
> + } else { /* BEEP_ENABLE */
> + val = (data->beeps[index] >> (bit)) & 1;
> + }
> +
> + return sprintf(buf, "%u\n", val);
> +}
> +
> +static ssize_t
> +store_beep(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct w83793_data *data = i2c_get_clientdata(client);
> + struct sensor_device_attribute_2 *sensor_attr =
> + to_sensor_dev_attr_2(attr);
> + int index = sensor_attr->index >> 3;
> + int shift = sensor_attr->index & 0x07;
> + u8 beep_bit = 1 << shift;
> + u8 val;
> +
> + val = simple_strtoul(buf, NULL, 10);
> + if (val != 0 && val != 1)
> + return -EINVAL;
> +
> + val <<= shift;
> + mutex_lock(&data->update_lock);
> + data->beeps[index] = w83793_read_value(client, W83793_REG_BEEP(index));
> + val |= data->beeps[index] & (~beep_bit);
> + WRITE_TO_REG(W83793_REG_BEEP(index), val, data->beeps[index]);
> + mutex_unlock(&data->update_lock);
> +
> + return count;
> +}
> +
> +static ssize_t
> +show_beep_enable(struct device *dev, struct device_attribute *attr, char *buf)
> +{
> + struct w83793_data *data = w83793_update_device(dev);
> + return sprintf(buf, "%u\n", (data->beep_enable >> 1) & 0x01);
> +}
> +
> +static ssize_t
> +store_beep_enable(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct w83793_data *data = i2c_get_clientdata(client);
> + u8 val = simple_strtoul(buf, NULL, 10);
> +
> + if (val != 0 && val != 1)
> + return -EINVAL;
> + val <<= 1;
> + mutex_lock(&data->update_lock);
> + data->beep_enable = w83793_read_value(client, W83793_REG_OVT_BEEP);
> + val |= data->beep_enable & 0xfd;
> + WRITE_TO_REG(W83793_REG_OVT_BEEP, val, data->beep_enable);
> + mutex_unlock(&data->update_lock);
> +
> + return count;
> +}
> +
> +/* Write any value to clear chassis alarm */
> +static ssize_t
> +store_chassis_clear(struct device *dev,
> + struct device_attribute *attr, const char *buf,
> + size_t count)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct w83793_data *data = i2c_get_clientdata(client);
> + u8 val;
> +
> + mutex_lock(&data->update_lock);
> + val = w83793_read_value(client, W83793_REG_CLR_CHASSIS);
> + val |= 0x80;
> + w83793_write_value(client, W83793_REG_CLR_CHASSIS, val);
> + mutex_unlock(&data->update_lock);
> + return count;
> +}
> +
> +#define FAN_INPUT 0
> +#define FAN_MIN 1
> +static ssize_t
> +show_fan(struct device *dev, struct device_attribute *attr, char *buf)
> +{
> + struct sensor_device_attribute_2 *sensor_attr =
> + to_sensor_dev_attr_2(attr);
> + int nr = sensor_attr->nr;
> + int index = sensor_attr->index;
> + struct w83793_data *data = w83793_update_device(dev);
> + u16 val;
> +
> + if (FAN_INPUT == nr) {
> + val = data->fan[index] & 0x0fff;
> + } else {
> + val = data->fan_min[index] & 0x0fff;
> + }
> +
> + return sprintf(buf, "%d\n", FAN_FROM_REG(val));
> +}
> +
> +static ssize_t
> +store_fan_min(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct sensor_device_attribute_2 *sensor_attr =
> + to_sensor_dev_attr_2(attr);
> + int index = sensor_attr->index;
> + struct i2c_client *client = to_i2c_client(dev);
> + struct w83793_data *data = i2c_get_clientdata(client);
> + u16 val = FAN_TO_REG(simple_strtoul(buf, NULL, 10));
> +
> + mutex_lock(&data->update_lock);
> + data->fan_min[index] = val;
> + w83793_write_value(client, W83793_REG_FAN_MIN(index),
> + (val >> 8) & 0xff);
> + w83793_write_value(client, W83793_REG_FAN_MIN(index) + 1, val & 0xff);
> + mutex_unlock(&data->update_lock);
> +
> + return count;
> +}
> +
> +#define PWM_DUTY 0
> +#define PWM_START 1
> +#define PWM_NONSTOP 2
> +#define PWM_STOP_TIME 3
> +static ssize_t
> +show_pwm(struct device *dev, struct device_attribute *attr, char *buf)
> +{
> + struct sensor_device_attribute_2 *sensor_attr =
> + to_sensor_dev_attr_2(attr);
> + struct w83793_data *data = w83793_update_device(dev);
> + u16 val;
> + int nr = sensor_attr->nr;
> + int index = sensor_attr->index;
> +
> + if (PWM_STOP_TIME == nr)
> + val = TIME_FROM_REG(data->pwm_stop_time[index]);
> + else
> + val = (data->pwm[index][nr] & 0x3f) << 2;
> +
> + return sprintf(buf, "%d\n", val);
> +}
> +
> +static ssize_t
> +store_pwm(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct w83793_data *data = i2c_get_clientdata(client);
> + struct sensor_device_attribute_2 *sensor_attr =
> + to_sensor_dev_attr_2(attr);
> + int nr = sensor_attr->nr;
> + int index = sensor_attr->index;
> + u8 val;
> +
> + mutex_lock(&data->update_lock);
> + if (PWM_STOP_TIME == nr) {
> + val = TIME_TO_REG(simple_strtoul(buf, NULL, 10));
> + WRITE_TO_REG(W83793_REG_PWM_STOP_TIME(index), val,
> + data->pwm_stop_time[index]);
> + } else {
> + val = SENSORS_LIMIT(simple_strtoul(buf, NULL, 10), 0, 0xff) >> 2;
> + data->pwm[index][nr] =
> + w83793_read_value(client, W83793_REG_PWM(index, nr));
> + val |= data->pwm[index][nr] & 0xc0;
> + WRITE_TO_REG(W83793_REG_PWM(index, nr), val,
> + data->pwm[index][nr]);
> + }
> +
> + mutex_unlock(&data->update_lock);
> + return count;
> +}
> +
> +static ssize_t
> +show_temp(struct device *dev, struct device_attribute *attr, char *buf)
> +{
> + struct sensor_device_attribute_2 *sensor_attr =
> + to_sensor_dev_attr_2(attr);
> + int nr = sensor_attr->nr;
> + int index = sensor_attr->index;
> + struct w83793_data *data = w83793_update_device(dev);
> + long temp = TEMP_FROM_REG(data->temp[index][nr]);
> +
> + if (TEMP_READ == nr && index < 4) { /* Only TD1-TD4 have low bits */
> + int low = ((data->temp_low_bits >> (index * 2)) & 0x03) * 250;
> + temp += temp > 0 ? low : -low;
> + }
> + return sprintf(buf, "%ld\n", temp);
> +}
> +
> +static ssize_t
> +store_temp(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct sensor_device_attribute_2 *sensor_attr =
> + to_sensor_dev_attr_2(attr);
> + int nr = sensor_attr->nr;
> + int index = sensor_attr->index;
> + struct i2c_client *client = to_i2c_client(dev);
> + struct w83793_data *data = i2c_get_clientdata(client);
> + long tmp = TEMP_TO_REG(simple_strtol(buf, NULL, 10));
> + u8 val = (u8) (SENSORS_LIMIT(tmp, -128, 127));
> +
> + mutex_lock(&data->update_lock);
> + WRITE_TO_REG(W83793_REG_TEMP[index][nr], val, data->temp[index][nr]);
> + mutex_unlock(&data->update_lock);
> + return count;
> +}
> +
> +/*
> + TD1-TD4
> + each has 4 mode:(2 bits)
> + 0: Stop monitor
> + 1: Use internal temp sensor(default)
> + 2: Use sensor in AMD CPU and get result by AMDSI
> + 3: Use sensor in Intel CPU and get result by PECI
> +
> + TR1-TR2
> + each has 2 mode:(1 bit)
> + 0: Disable temp sensor monitor
> + 1: To enable temp sensors monitor
> +*/
> +static ssize_t
> +show_temp_mode(struct device *dev, struct device_attribute *attr, char *buf)
> +{
> + struct w83793_data *data = w83793_update_device(dev);
> + struct sensor_device_attribute_2 *sensor_attr =
> + to_sensor_dev_attr_2(attr);
> + int index = sensor_attr->index;
> + u8 mask = (index < 4) ? 0x03 : 0x01;
> + u8 shift = (index < 4) ? (2 * index) : (index - 4);
> +
> + index = (index < 4) ? 0 : 1;
> +
> + return sprintf(buf, "%d\n", (data->temp_mode[index] >> shift) & mask);
> +}
The thermal sensors types are already standardized, see sysfs-interface.
It would be nice to respect the standard. So we need new types (5 and 6,
I guess) for AMDSI and PECI, respectively.
> +
> +static ssize_t
> +store_temp_mode(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct w83793_data *data = i2c_get_clientdata(client);
> + struct sensor_device_attribute_2 *sensor_attr =
> + to_sensor_dev_attr_2(attr);
> + int index = sensor_attr->index;
> + u8 mask = (index < 4) ? 0x03 : 0x01;
> + u8 shift = (index < 4) ? (2 * index) : (index - 4);
> + int val = simple_strtoul(buf, NULL, 10);
> +
> + if (val < 0 || val > mask)
> + return -EINVAL;
> +
> + index = (index < 4) ? 0 : 1;
> + val <<= shift;
> + mutex_lock(&data->update_lock);
> + data->temp_mode[index] =
> + w83793_read_value(client, W83793_REG_TEMP_MODE[index]);
> + val |= data->temp_mode[index] & (~(mask << shift));
> + WRITE_TO_REG(W83793_REG_TEMP_MODE[index], val, data->temp_mode[index]);
> + mutex_unlock(&data->update_lock);
> +
> + return count;
> +}
> +
> +#define SETUP_PWM_DEFAULT 0
> +#define SETUP_PWM_UPTIME 1 /* Unit in 0.1s */
> +#define SETUP_PWM_DOWNTIME 2 /* Unit in 0.1s */
> +#define SETUP_TEMP_CRITICAL 3
> +static ssize_t
> +show_sf_setup(struct device *dev, struct device_attribute *attr, char *buf)
> +{
> + struct sensor_device_attribute_2 *sensor_attr =
> + to_sensor_dev_attr_2(attr);
> + int nr = sensor_attr->nr;
> + struct w83793_data *data = w83793_update_device(dev);
> + u32 val = 0;
> +
> + if (SETUP_PWM_DEFAULT == nr) {
> + val = (data->pwm_default & 0x3f) << 2;
> + } else if (SETUP_PWM_UPTIME == nr) {
> + val = TIME_FROM_REG(data->pwm_uptime);
> + } else if (SETUP_PWM_DOWNTIME == nr) {
> + val = TIME_FROM_REG(data->pwm_downtime);
> + } else if (SETUP_TEMP_CRITICAL == nr) {
> + val = TEMP_FROM_REG(data->temp_critical & 0x7f);
> + }
> +
> + return sprintf(buf, "%d\n", val);
> +}
> +
> +static ssize_t
> +store_sf_setup(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct sensor_device_attribute_2 *sensor_attr =
> + to_sensor_dev_attr_2(attr);
> + int nr = sensor_attr->nr;
> + struct i2c_client *client = to_i2c_client(dev);
> + struct w83793_data *data = i2c_get_clientdata(client);
> + u8 val;
> +
> + mutex_lock(&data->update_lock);
> + if (SETUP_PWM_DEFAULT == nr) {
> + data->pwm_default =
> + w83793_read_value(client, W83793_REG_PWM_DEFAULT);
> + val = SENSORS_LIMIT(simple_strtoul(buf, NULL, 10), 0, 0xff) >> 2;
> + val |= data->pwm_default & 0xc0;
> + WRITE_TO_REG(W83793_REG_PWM_DEFAULT, val, data->pwm_default);
> + } else if (SETUP_PWM_UPTIME == nr) {
> + val = TIME_TO_REG(simple_strtoul(buf, NULL, 10));
> + val += val == 0 ? 1 : 0;
> + WRITE_TO_REG(W83793_REG_PWM_UPTIME, val, data->pwm_uptime);
> + } else if (SETUP_PWM_DOWNTIME == nr) {
> + val = TIME_TO_REG(simple_strtoul(buf, NULL, 10));
> + val += val == 0 ? 1 : 0;
> + WRITE_TO_REG(W83793_REG_PWM_DOWNTIME, val, data->pwm_downtime);
> + } else { /* SETUP_TEMP_CRITICAL */
> + data->temp_critical =
> + w83793_read_value(client, W83793_REG_TEMP_CRITICAL);
> + val = SENSORS_LIMIT(TEMP_TO_REG(simple_strtol(buf, NULL, 10)), 0, 0x7f);
> + val |= data->temp_critical & 0x80;
> + WRITE_TO_REG(W83793_REG_TEMP_CRITICAL, val,
> + data->temp_critical);
> + }
> +
> + mutex_unlock(&data->update_lock);
> + return count;
> +}
> +
> +/*
> + Temp SmartFan control
> + TEMP_FAN_MAP
> + Temp channel control which pwm fan, bitfield, bit 0 indicate pwm1...
> + It's possible two or more temp channels control the same fan, w83793
> + always prefers to pick the most critical request and applies it to
> + the related Fan.
> + It's possible one fan is not in any mapping of 6 temp channels, this
> + means the fan is manual mode
> +
> + TEMP_PWM_ENABLE
> + Each temp channel has it's own SmartFan mode, and temp channel
s/it's/its/
> + control fans that are set by TEMP_FAN_MAP
> + 0: SmartFanII mode
> + 1: Thermal Cruise Mode
This doesn't follow the standard, needs to be fixed. Automatic modes
must use 2 and above.
> +
> + TEMP_CRUISE
> + Target temperature in thermal cruise mode, w83793 will try to turn
> + fan speed to keep the temperature of target device around this
> + temperature.
> +
> + TEMP_TOLERANCE
> + Only Temp higher or lower than target with this tolerance, w83793
> + will take actions to speed up or lower down the fan to keep the
> + temperature within the tolerance range.
s/Only/If/
s/lower down/slow down/
> +*/
> +
> +#define TEMP_FAN_MAP 0
> +#define TEMP_PWM_ENABLE 1
> +#define TEMP_CRUISE 2
> +#define TEMP_TOLERANCE 3
> +static ssize_t
> +show_sf_ctrl(struct device *dev, struct device_attribute *attr, char *buf)
> +{
> + struct sensor_device_attribute_2 *sensor_attr =
> + to_sensor_dev_attr_2(attr);
> + int nr = sensor_attr->nr;
> + int index = sensor_attr->index;
> + struct w83793_data *data = w83793_update_device(dev);
> + u32 val;
> +
> + if (TEMP_FAN_MAP == nr) {
> + val = data->temp_fan_map[index];
> + } else if (TEMP_PWM_ENABLE == nr) {
> + val = (data->pwm_enable >> index) & 0x01;
> + } else if (TEMP_CRUISE == nr) {
> + val = TEMP_FROM_REG(data->temp_cruise[index] & 0x7f);
> + } else { /* TEMP_TOLERANCE */
> + val = data->tolerance[index >> 1] >> ((index & 0x01) ? 4 : 0);
> + val = TEMP_FROM_REG(val & 0x0f);
> + }
> + return sprintf(buf, "%d\n", val);
> +}
> +
> +static ssize_t
> +store_sf_ctrl(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct sensor_device_attribute_2 *sensor_attr =
> + to_sensor_dev_attr_2(attr);
> + int nr = sensor_attr->nr;
> + int index = sensor_attr->index;
> + struct i2c_client *client = to_i2c_client(dev);
> + struct w83793_data *data = i2c_get_clientdata(client);
> + u32 val;
> +
> + mutex_lock(&data->update_lock);
> + if (TEMP_FAN_MAP == nr) {
> + val = simple_strtoul(buf, NULL, 10) & 0xff;
Wouldn't it make sense to return an error here if more bits are
provided? The user can know the number of bits by reading the contents
of the sysfs directory.
> + WRITE_TO_REG(W83793_REG_TEMP_FAN_MAP(index), val,
> + data->temp_fan_map[index]);
> + } else if (TEMP_PWM_ENABLE == nr) {
> + val = simple_strtoul(buf, NULL, 10);
> + if (0 == val || 1 == val) {
> + u8 tmp = data->pwm_enable;
> + data->pwm_enable =
> + w83793_read_value(client, W83793_REG_PWM_ENABLE);
This looks broken to me. Both lines should be swapped, right?
> + if (val)
> + tmp |= 1 << index;
> + else
> + tmp &= ~(1 << index);
> + WRITE_TO_REG(W83793_REG_PWM_ENABLE, tmp,
> + data->pwm_enable);
> + } else {
> + mutex_unlock(&data->update_lock);
> + return -EINVAL;
> + }
> + } else if (TEMP_CRUISE == nr) {
> + data->temp_cruise[index] =
> + w83793_read_value(client, W83793_REG_TEMP_CRUISE(index));
> + val =
> + SENSORS_LIMIT(TEMP_TO_REG(simple_strtol(buf, NULL, 10)), 0,
> + 0x7f);
> + val |= data->temp_cruise[index] & 0x80;
> + WRITE_TO_REG(W83793_REG_TEMP_CRUISE(index), val,
> + data->temp_cruise[index]);
> + } else { /* TEMP_TOLERANCE */
> + int i = index >> 1;
> + u8 shift = (index & 0x01) ? 4 : 0;
> + val =
> + SENSORS_LIMIT(TEMP_TO_REG(simple_strtol(buf, NULL, 10)), 0,
> + 0x0f);
> + val <<= shift;
> + val |= data->tolerance[i] & (~(0x0f << shift));
> + WRITE_TO_REG(W83793_REG_TEMP_TOL(i), val, data->tolerance[i]);
> + }
> +
> + mutex_unlock(&data->update_lock);
> + return count;
> +}
> +
> +static ssize_t
> +show_sf2_pwm(struct device *dev, struct device_attribute *attr, char *buf)
> +{
> + struct sensor_device_attribute_2 *sensor_attr =
> + to_sensor_dev_attr_2(attr);
> + int nr = sensor_attr->nr;
> + int index = sensor_attr->index;
> + struct w83793_data *data = w83793_update_device(dev);
> +
> + return sprintf(buf, "%d\n", (data->sf2_pwm[index][nr] & 0x3f) << 2);
> +}
> +
> +static ssize_t
> +store_sf2_pwm(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct w83793_data *data = i2c_get_clientdata(client);
> + struct sensor_device_attribute_2 *sensor_attr =
> + to_sensor_dev_attr_2(attr);
> + int nr = sensor_attr->nr;
> + int index = sensor_attr->index;
> + u8 val = SENSORS_LIMIT(simple_strtoul(buf, NULL, 10), 0, 0xff) >> 2;
Input range is normalized, so out-of-range values should trigger
an error.
> +
> + mutex_lock(&data->update_lock);
> + data->sf2_pwm[index][nr] =
> + w83793_read_value(client, W83793_REG_SF2_PWM(index, nr));
> + val |= data->sf2_pwm[index][nr] & 0xc0;
> + WRITE_TO_REG(W83793_REG_SF2_PWM(index, nr), val,
> + data->sf2_pwm[index][nr]);
> + mutex_unlock(&data->update_lock);
> + return count;
> +}
> +
> +static ssize_t
> +show_sf2_temp(struct device *dev, struct device_attribute *attr, char *buf)
> +{
> + struct sensor_device_attribute_2 *sensor_attr =
> + to_sensor_dev_attr_2(attr);
> + int nr = sensor_attr->nr;
> + int index = sensor_attr->index;
> + struct w83793_data *data = w83793_update_device(dev);
> +
> + return sprintf(buf, "%d\n",
> + TEMP_FROM_REG(data->sf2_temp[index][nr] & 0x7f));
> +}
> +
> +static ssize_t
> +store_sf2_temp(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct w83793_data *data = i2c_get_clientdata(client);
> + struct sensor_device_attribute_2 *sensor_attr =
> + to_sensor_dev_attr_2(attr);
> + int nr = sensor_attr->nr;
> + int index = sensor_attr->index;
> + u8 val =
> + SENSORS_LIMIT(TEMP_TO_REG(simple_strtol(buf, NULL, 10)), 0, 0x7f);
> +
> + mutex_lock(&data->update_lock);
> + data->sf2_temp[index][nr] =
> + w83793_read_value(client, W83793_REG_SF2_TEMP(index, nr));
> + val |= data->sf2_temp[index][nr] & 0x80;
> + WRITE_TO_REG(W83793_REG_SF2_TEMP(index, nr), val,
> + data->sf2_temp[index][nr]);
> + mutex_unlock(&data->update_lock);
> + return count;
> +}
> +
> +/* only Vcore A/B Vtt have additional 2 bits precision */
s/Vtt/and Vtt/
> +static ssize_t
> +show_in(struct device *dev, struct device_attribute *attr, char *buf)
> +{
> + struct sensor_device_attribute_2 *sensor_attr =
> + to_sensor_dev_attr_2(attr);
> + int nr = sensor_attr->nr;
> + int index = sensor_attr->index;
> + struct w83793_data *data = w83793_update_device(dev);
> + u16 val = data->in[index][nr];
> +
> + if (index < 3) {
> + val <<= 2;
> + val += (data->in_low_bits[nr] >> (index * 2)) & 0x3;
> + }
> + return sprintf(buf, "%d\n", val * scale_in[index]);
> +}
> +
> +static ssize_t
> +store_in(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct sensor_device_attribute_2 *sensor_attr =
> + to_sensor_dev_attr_2(attr);
> + int nr = sensor_attr->nr;
> + int index = sensor_attr->index;
> + struct i2c_client *client = to_i2c_client(dev);
> + struct w83793_data *data = i2c_get_clientdata(client);
> + u32 val;
> +
> + val =
> + (simple_strtoul(buf, NULL, 10) +
> + scale_in[index] / 2) / scale_in[index];
> + mutex_lock(&data->update_lock);
> + if (index > 2) {
> + val = SENSORS_LIMIT(val, 0, 255);
> + } else {
> + u8 low_bits;
> + val = SENSORS_LIMIT(val, 0, 0x3FF);
> + low_bits = (val & 0x03) << (2 * index);
> + data->in_low_bits[nr] =
> + w83793_read_value(client, W83793_REG_IN_LOW_BITS[nr]);
> + low_bits &= data->in_low_bits[nr] & (~(0x03 << (2 * index)));
> + val >>= 2;
> + WRITE_TO_REG(W83793_REG_IN_LOW_BITS[nr], low_bits,
> + data->in_low_bits[nr]);
> + }
> +
> + WRITE_TO_REG(W83793_REG_IN[index][nr], val, data->in[index][nr]);
> + mutex_unlock(&data->update_lock);
> + return count;
> +}
> +
> +#define NOT_USED -1
> +
> +#define SENSOR_ATTR_IN(index) \
> + SENSOR_ATTR_2(in##index##_input, S_IRUGO, show_in, NULL, \
> + IN_READ, index), \
> + SENSOR_ATTR_2(in##index##_max, S_IRUGO | S_IWUSR, show_in, \
> + store_in, IN_MAX, index), \
> + SENSOR_ATTR_2(in##index##_min, S_IRUGO | S_IWUSR, show_in, \
> + store_in, IN_LOW, index), \
> + SENSOR_ATTR_2(in##index##_alarm, S_IRUGO, show_alarm_beep, \
> + NULL, ALARM_STATUS, index + ((index > 2) ? 1 : 0)), \
> + SENSOR_ATTR_2(in##index##_beep, S_IWUSR | S_IRUGO, \
> + show_alarm_beep, store_beep, BEEP_ENABLE, \
> + index + ((index > 2) ? 1 : 0))
> +
> +#define SENSOR_ATTR_FAN(index) \
> + SENSOR_ATTR_2(fan##index##_alarm, S_IRUGO, show_alarm_beep, \
> + NULL, ALARM_STATUS, index + 17), \
> + SENSOR_ATTR_2(fan##index##_beep, S_IWUSR | S_IRUGO, \
> + show_alarm_beep, store_beep, BEEP_ENABLE, index + 17), \
> + SENSOR_ATTR_2(fan##index##_input, S_IRUGO, show_fan, \
> + NULL, FAN_INPUT, index - 1), \
> + SENSOR_ATTR_2(fan##index##_min, S_IWUSR | S_IRUGO, \
> + show_fan, store_fan_min, FAN_MIN, index - 1)
> +
> +#define SENSOR_ATTR_PWM(index) \
> + SENSOR_ATTR_2(pwm##index, S_IWUSR | S_IRUGO, show_pwm, \
> + store_pwm, PWM_DUTY, index - 1), \
> + SENSOR_ATTR_2(pwm##index##_nonstop, S_IWUSR | S_IRUGO, \
> + show_pwm, store_pwm, PWM_NONSTOP, index - 1), \
Should we add this to the standard?
> + SENSOR_ATTR_2(pwm##index##_start, S_IWUSR | S_IRUGO, \
> + show_pwm, store_pwm, PWM_START, index - 1), \
> + SENSOR_ATTR_2(pwm##index##_stop_time, S_IWUSR | S_IRUGO, \
> + show_pwm, store_pwm, PWM_STOP_TIME, index - 1)
And these?
> +
> +#define SENSOR_ATTR_TEMP(index) \
> + SENSOR_ATTR_2(temp##index##_mode, S_IRUGO | S_IWUSR, \
> + show_temp_mode, store_temp_mode, NOT_USED, index - 1), \
> + SENSOR_ATTR_2(temp##index##_input, S_IRUGO, show_temp, \
> + NULL, TEMP_READ, index - 1), \
> + SENSOR_ATTR_2(temp##index##_max, S_IRUGO | S_IWUSR, show_temp, \
> + store_temp, TEMP_CRIT, index - 1), \
> + SENSOR_ATTR_2(temp##index##_max_hyst, S_IRUGO | S_IWUSR, \
> + show_temp, store_temp, TEMP_CRIT_HYST, index - 1), \
> + SENSOR_ATTR_2(temp##index##_warn, S_IRUGO | S_IWUSR, show_temp, \
> + store_temp, TEMP_WARN, index - 1), \
> + SENSOR_ATTR_2(temp##index##_warn_hyst, S_IRUGO | S_IWUSR, \
> + show_temp, store_temp, TEMP_WARN_HYST, index - 1), \
> + SENSOR_ATTR_2(temp##index##_alarm, S_IRUGO, \
> + show_alarm_beep, NULL, ALARM_STATUS, index + 11), \
> + SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO, \
> + show_alarm_beep, store_beep, BEEP_ENABLE, index + 11), \
> + SENSOR_ATTR_2(temp##index##_auto_channels_pwm, \
> + S_IRUGO | S_IWUSR, show_sf_ctrl, store_sf_ctrl, \
> + TEMP_FAN_MAP, index - 1), \
> + SENSOR_ATTR_2(temp##index##_pwm_enable, S_IWUSR | S_IRUGO, \
> + show_sf_ctrl, store_sf_ctrl, TEMP_PWM_ENABLE, \
> + index - 1), \
> + SENSOR_ATTR_2(thermal_cruise##index, S_IRUGO | S_IWUSR, \
> + show_sf_ctrl, store_sf_ctrl, TEMP_CRUISE, index - 1), \
> + SENSOR_ATTR_2(tolerance##index, S_IRUGO | S_IWUSR, show_sf_ctrl,\
> + store_sf_ctrl, TEMP_TOLERANCE, index - 1), \
> + SENSOR_ATTR_2(temp##index##_auto_point1_pwm, S_IRUGO | S_IWUSR, \
> + show_sf2_pwm, store_sf2_pwm, 0, index - 1), \
> + SENSOR_ATTR_2(temp##index##_auto_point2_pwm, S_IRUGO | S_IWUSR, \
> + show_sf2_pwm, store_sf2_pwm, 1, index - 1), \
> + SENSOR_ATTR_2(temp##index##_auto_point3_pwm, S_IRUGO | S_IWUSR, \
> + show_sf2_pwm, store_sf2_pwm, 2, index - 1), \
> + SENSOR_ATTR_2(temp##index##_auto_point4_pwm, S_IRUGO | S_IWUSR, \
> + show_sf2_pwm, store_sf2_pwm, 3, index - 1), \
> + SENSOR_ATTR_2(temp##index##_auto_point5_pwm, S_IRUGO | S_IWUSR, \
> + show_sf2_pwm, store_sf2_pwm, 4, index - 1), \
> + SENSOR_ATTR_2(temp##index##_auto_point6_pwm, S_IRUGO | S_IWUSR, \
> + show_sf2_pwm, store_sf2_pwm, 5, index - 1), \
> + SENSOR_ATTR_2(temp##index##_auto_point7_pwm, S_IRUGO | S_IWUSR, \
> + show_sf2_pwm, store_sf2_pwm, 6, index - 1), \
> + SENSOR_ATTR_2(temp##index##_auto_point1_temp, S_IRUGO | S_IWUSR,\
> + show_sf2_temp, store_sf2_temp, 0, index - 1), \
> + SENSOR_ATTR_2(temp##index##_auto_point2_temp, S_IRUGO | S_IWUSR,\
> + show_sf2_temp, store_sf2_temp, 1, index - 1), \
> + SENSOR_ATTR_2(temp##index##_auto_point3_temp, S_IRUGO | S_IWUSR,\
> + show_sf2_temp, store_sf2_temp, 2, index - 1), \
> + SENSOR_ATTR_2(temp##index##_auto_point4_temp, S_IRUGO | S_IWUSR,\
> + show_sf2_temp, store_sf2_temp, 3, index - 1), \
> + SENSOR_ATTR_2(temp##index##_auto_point5_temp, S_IRUGO | S_IWUSR,\
> + show_sf2_temp, store_sf2_temp, 4, index - 1), \
> + SENSOR_ATTR_2(temp##index##_auto_point6_temp, S_IRUGO | S_IWUSR,\
> + show_sf2_temp, store_sf2_temp, 5, index - 1), \
> + SENSOR_ATTR_2(temp##index##_auto_point7_temp, S_IRUGO | S_IWUSR,\
> + show_sf2_temp, store_sf2_temp, 6, index - 1)
> +
> +static struct sensor_device_attribute_2 w83793_sensor_attr_2[] = {
> + SENSOR_ATTR_IN(0),
> + SENSOR_ATTR_IN(1),
> + SENSOR_ATTR_IN(2),
> + SENSOR_ATTR_IN(3),
> + SENSOR_ATTR_IN(4),
> + SENSOR_ATTR_IN(5),
> + SENSOR_ATTR_IN(6),
> + SENSOR_ATTR_IN(7),
> + SENSOR_ATTR_IN(8),
> + SENSOR_ATTR_IN(9),
> + SENSOR_ATTR_TEMP(1),
> + SENSOR_ATTR_TEMP(2),
> + SENSOR_ATTR_TEMP(3),
> + SENSOR_ATTR_TEMP(4),
> + SENSOR_ATTR_TEMP(5),
> + SENSOR_ATTR_TEMP(6),
> + SENSOR_ATTR_FAN(1),
> + SENSOR_ATTR_FAN(2),
> + SENSOR_ATTR_FAN(3),
> + SENSOR_ATTR_FAN(4),
> + SENSOR_ATTR_FAN(5),
> + SENSOR_ATTR_PWM(1),
> + SENSOR_ATTR_PWM(2),
> + SENSOR_ATTR_PWM(3),
> +};
> +
> +/* Fan6-Fan12 */
> +static struct sensor_device_attribute_2 w83793_left_fan[] = {
> + SENSOR_ATTR_FAN(6),
> + SENSOR_ATTR_FAN(7),
> + SENSOR_ATTR_FAN(8),
> + SENSOR_ATTR_FAN(9),
> + SENSOR_ATTR_FAN(10),
> + SENSOR_ATTR_FAN(11),
> + SENSOR_ATTR_FAN(12),
> +};
> +
> +/* Pwm4-Pwm8 */
> +static struct sensor_device_attribute_2 w83793_left_pwm[] = {
> + SENSOR_ATTR_PWM(4),
> + SENSOR_ATTR_PWM(5),
> + SENSOR_ATTR_PWM(6),
> + SENSOR_ATTR_PWM(7),
> + SENSOR_ATTR_PWM(8),
> +};
> +
> +static struct sensor_device_attribute_2 sda_single_files[] = {
> + SENSOR_ATTR_2(cpu0_vid, S_IRUGO, show_vid, NULL, NOT_USED, 0),
> + SENSOR_ATTR_2(cpu1_vid, S_IRUGO, show_vid, NULL, NOT_USED, 1),
> + SENSOR_ATTR_2(vrm, S_IWUSR | S_IRUGO, show_vrm, store_vrm,
> + NOT_USED, NOT_USED),
> + SENSOR_ATTR_2(chassis, S_IRUGO, show_alarm_beep, store_chassis_clear,
> + ALARM_STATUS, 30),
Missing S_IWUSR.
> + SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_beep_enable,
> + store_beep_enable, NOT_USED, NOT_USED),
> + SENSOR_ATTR_2(pwm_default, S_IWUSR | S_IRUGO, show_sf_setup,
> + store_sf_setup, SETUP_PWM_DEFAULT, NOT_USED),
> + SENSOR_ATTR_2(pwm_uptime, S_IWUSR | S_IRUGO, show_sf_setup,
> + store_sf_setup, SETUP_PWM_UPTIME, NOT_USED),
> + SENSOR_ATTR_2(pwm_downtime, S_IWUSR | S_IRUGO, show_sf_setup,
> + store_sf_setup, SETUP_PWM_DOWNTIME, NOT_USED),
> + SENSOR_ATTR_2(temp_critical, S_IWUSR | S_IRUGO, show_sf_setup,
> + store_sf_setup, SETUP_TEMP_CRITICAL, NOT_USED),
These four entries don't fit in the standard naming convention :(
> +};
> +
> +static void w83793_init_client(struct i2c_client *client)
> +{
> + if (reset) {
> + w83793_write_value(client, W83793_REG_CONFIG, 0x80);
> + }
> +
> + /* Start monitoring */
> + w83793_write_value(client, W83793_REG_CONFIG,
> + w83793_read_value(client, W83793_REG_CONFIG) | 0x01);
> +
> +}
> +
> +static int w83793_attach_adapter(struct i2c_adapter *adapter)
> +{
> + if (!(adapter->class & I2C_CLASS_HWMON))
> + return 0;
> + return i2c_probe(adapter, &addr_data, w83793_detect);
> +}
> +
> +static int w83793_detach_client(struct i2c_client *client)
> +{
> + struct w83793_data *data = i2c_get_clientdata(client);
> + struct device *dev = &client->dev;
> + int err, i;
> +
> + /* main client */
> + if (data)
> + hwmon_device_unregister(data->class_dev);
> +
> + for (i = 0; i < ARRAY_SIZE(w83793_sensor_attr_2); i++)
> + device_remove_file(dev, &w83793_sensor_attr_2[i].dev_attr);
> +
> + for (i = 0; i < ARRAY_SIZE(sda_single_files); i++)
> + device_remove_file(dev, &sda_single_files[i].dev_attr);
> +
> + for (i = 0; i < ARRAY_SIZE(w83793_left_fan); i++)
> + device_remove_file(dev, &w83793_left_fan[i].dev_attr);
All the remove_files calls should depend on "data" as well, as
subclients don't have these files. Also, w83793_left_pwm array
was forgotten.
> +
> + if ((err = i2c_detach_client(client)))
> + return err;
> +
> + /* main client */
> + if (data)
> + kfree(data);
> + /* subclient */
> + else
> + kfree(client);
> +
> + return 0;
> +}
> +
> +static int
> +w83793_create_subclient(struct i2c_adapter *adapter,
> + struct i2c_client *client, int addr,
> + struct i2c_client **sub_cli)
> +{
> + int err = 0;
> + struct i2c_client *sub_client;
> +
> + (*sub_cli) = sub_client =
> + kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
> + if (!(sub_client)) {
> + return -ENOMEM;
> + }
> + sub_client->addr = 0x48 + addr;
> + i2c_set_clientdata(sub_client, NULL);
> + sub_client->adapter = adapter;
> + sub_client->driver = &w83793_driver;
> + sub_client->flags = 0;
Useless, kzalloc did that already.
> + strlcpy(sub_client->name, "w83793 subclient", I2C_NAME_SIZE);
> + if ((err = i2c_attach_client(sub_client))) {
> + dev_err(&client->dev, "subclient registration "
> + "at address 0x%x failed\n", sub_client->addr);
> + kfree(sub_client);
> + }
> + return err;
> +}
> +
> +static int
> +w83793_detect_subclients(struct i2c_adapter *adapter, int address,
> + int kind, struct i2c_client *client)
> +{
> + int i, id, err;
> + u8 tmp;
> + struct w83793_data *data = i2c_get_clientdata(client);
> +
> + id = i2c_adapter_id(adapter);
> + if (force_subclients[0] == id && force_subclients[1] == address) {
> + for (i = 2; i <= 3; i++) {
> + if (force_subclients[i] < 0x48
> + || force_subclients[i] > 0x4f) {
> + dev_err(&client->dev,
> + "invalid subclient "
> + "address %d; must be 0x48-0x4f\n",
> + force_subclients[i]);
> + err = -ENODEV;
This is an invalid user input, so -EINVAL.
> + goto ERROR_SC_0;
> + }
> + }
> + w83793_write_value(client, W83793_REG_I2C_SUBADDR,
> + (force_subclients[2] & 0x07) |
> + ((force_subclients[3] & 0x07) << 4));
> + }
> +
> + tmp = w83793_read_value(client, W83793_REG_I2C_SUBADDR);
> + if (!(tmp & 0x08)) {
> + err =
> + w83793_create_subclient(adapter, client, tmp & 0x7,
> + &data->lm75[0]);
> + if (err < 0)
> + goto ERROR_SC_0;
> + }
> + if (!(tmp & 0x80)) {
> + if ((data->lm75[0] != NULL)
> + && ((tmp & 0x7) == ((tmp >> 4) & 0x7))) {
> + dev_err(&client->dev,
> + "duplicate addresses 0x%x, "
> + "use force_subclients\n", data->lm75[0]->addr);
> + err = -ENODEV;
> + goto ERROR_SC_1;
> + }
> + err = w83793_create_subclient(adapter, client,
> + (tmp >> 4) & 0x7, &data->lm75[1]);
> + if (err < 0)
> + goto ERROR_SC_1;
> + }
> +
> + return 0;
> +
> + /* Undo inits in case of errors */
> +
> +ERROR_SC_1:
> + if (data->lm75[0] != NULL) {
> + i2c_detach_client(data->lm75[0]);
> + kfree(data->lm75[0]);
> + }
> +ERROR_SC_0:
> + return err;
> +}
> +
> +static int w83793_detect(struct i2c_adapter *adapter, int address, int kind)
> +{
> + int i;
> + u8 tmp, val;
> + struct i2c_client *client;
> + struct device *dev;
> + struct w83793_data *data;
> + int err = 0;
> + const char *client_name = "";
> +
> + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
> + err = -EINVAL;
> + goto exit;
> + }
This is not an error!
> +
> + /* OK. For now, we presume we have a valid client. We now create the
> + client structure, even though we cannot fill it completely yet.
> + But it allows us to access w83793_{read,write}_value. */
> +
> + if (!(data = kzalloc(sizeof(struct w83793_data), GFP_KERNEL))) {
> + err = -ENOMEM;
> + goto exit;
> + }
> +
> + client = &data->client;
> + dev = &client->dev;
> + /* use unused bank number to initialize the value */
> + data->bank = 4;
> + i2c_set_clientdata(client, data);
> + client->addr = address;
> + client->adapter = adapter;
> + client->driver = &w83793_driver;
> + client->flags = 0;
Not needed (thanks to kzalloc).
> + mutex_init(&data->lock);
> +
> + /* Now, we do the remaining detection. */
> + if (kind < 0) {
> + if (w83793_read_value(client, W83793_REG_CONFIG) & 0x80) {
> + dev_dbg(dev, "Detection failed at step 1\n");
Explicit error message? All other cases below have it. BTW you can't
use dev_dbg on the i2c chip device at this point, as it doesn't have a
name yet. Either use pr_debug, or dev_dbg but on the i2c adapter device.
> + err = -ENODEV;
> + goto free_mem;
> + }
> +
> + data->bank = w83793_read_value(client, W83793_REG_BANKSEL);
> + tmp = data->bank & 0x80 ? 0x5c : 0xa3;
> + /* Check Winbond vendor ID */
> + if (tmp != w83793_read_value(client, W83793_REG_VENDORID)) {
> + dev_dbg(dev, "Detection failed at check vendor id\n");
> + err = -ENODEV;
> + goto free_mem;
> + }
> +
> + /* If Winbond chip, address of chip and W83793_REG_I2C_ADDR
> + should match */
> + if (w83793_read_value(client, W83793_REG_I2C_ADDR) !=
> + (address << 1)) {
> + dev_dbg(dev, "Detection failed at check i2c addr\n");
> + err = -ENODEV;
> + goto free_mem;
> + }
> +
> + }
> +
> + /* We have either had a force parameter, or we have already detected the
> + Winbond. Put it now into bank 0 and Vendor ID High Byte */
This comment doesn't match the code, we already have forced the chip to
bank 0 when calling w83793_read_value above. This isn't acceptable, as
detection should not write to the chip. Calls to w83793_read_value
above need to be changed to calls to i2c_smbus_read_byte_data.
If I understand correctly, the chip ID register too can be read
whatever the selected bank is, so it should be moved above as well.
OTOH the I2C address and configuration registers can only be read in
bank 0 so these tests should be moved later in the detection process
(at a point we're already almost certain that we have the right chip.)
> +
> + /* Determine the chip type. */
> + if (kind <= 0) {
> + if (0x7b == w83793_read_value(client, W83793_REG_CHIPID)) {
> + kind = w83793;
> + client_name = "w83793";
Setting the client name must be moved below, otherwise forcing the chip
type to w83793 as a module parameter will leave the user with a nameless
device.
> + } else {
> + if (kind == 0)
> + dev_warn(dev,
> + "w83793: Ignoring 'force' parameter for"
> + " unknown chip at adapter %d, address"
> + " 0x%02x\n",
> + i2c_adapter_id(adapter), address);
> + err = -ENODEV;
> + goto free_mem;
> + }
> + }
> +
> + if (kind != w83793) {
> + dev_err(dev, "w83793: Internal error: unknown kind %d\n", kind);
> + err = -ENODEV;
> + goto free_mem;
> + }
Just silently default to w83793.
> +
> + /* Fill in the remaining client fields and put into the global list */
> + strlcpy(client->name, client_name, I2C_NAME_SIZE);
> + data->type = kind;
> +
> + data->valid = 0;
Not needed.
> + mutex_init(&data->update_lock);
> +
> + /* Tell the I2C layer a new client has arrived */
> + if ((err = i2c_attach_client(client)))
> + goto free_mem;
> +
> + if ((err = w83793_detect_subclients(adapter, address, kind, client)))
> + goto detach_client;
> +
> + /* Initialize the chip */
> + w83793_init_client(client);
> +
> + data->vrm = vid_which_vrm();
> + /*
> + Only fan 1-5 has their own input pins,
> + Pwm 1-3 has their own pins
> + */
> + data->has_fan = 0x1f;
> + data->has_pwm = 0x07;
> + tmp = w83793_read_value(client, W83793_REG_MFC);
> + val = w83793_read_value(client, W83793_REG_FANIN_CTRL);
> +
> + if (!(tmp & 0x80)) {
> + data->has_pwm |= 0x18; /* pwm 4,5 */
> + if (val & 0x01) { /* fan 6 */
> + data->has_fan |= 0x20;
> + data->has_pwm |= 0x20;
> + }
> + if (val & 0x02) { /* fan 7 */
> + data->has_fan |= 0x40;
> + data->has_pwm |= 0x40;
> + }
> + if (!(tmp & 0x40) && (val & 0x04)) { /* fan 8 */
> + data->has_fan |= 0x80;
> + data->has_pwm |= 0x80;
> + }
> + }
> +
> + if (0x08 == (tmp & 0x0c)) {
> + if (val & 0x08) /* fan 9 */
> + data->has_fan |= 0x100;
> + if (val & 0x10) /* fan 10 */
> + data->has_fan |= 0x200;
> + }
> +
> + if (0x20 == (tmp & 0x30)) {
> + if (val & 0x20) /* fan 11 */
> + data->has_fan |= 0x400;
> + if (val & 0x40) /* fan 12 */
> + data->has_fan |= 0x800;
> + }
> +
> + if ((tmp & 0x01) && (val & 0x04)) { /* fan 8 */
> + data->has_fan |= 0x80;
> + data->has_pwm |= 0x80;
> + }
Hm, fan 8 was already covered above. What's the trick? It needs
a comment at least.
> +
> + /* Register sysfs hooks */
> + for (i = 0; i < ARRAY_SIZE(w83793_sensor_attr_2); i++) {
> + err = device_create_file(dev, &w83793_sensor_attr_2[i].dev_attr);
> + if (err)
> + goto exit_remove;
> + }
> +
> + for (i = 0; i < ARRAY_SIZE(sda_single_files); i++) {
> + err = device_create_file(dev, &sda_single_files[i].dev_attr);
> + if (err)
> + goto exit_remove;
> +
> + }
> +
> + for (i = 5; i < 12; i++) {
> + int files_fan = ARRAY_SIZE(w83793_left_fan) / 7;
> + int files_pwm = ARRAY_SIZE(w83793_left_pwm) / 5;
These two should be initialized outside of the loop.
> + int j;
> + if (!(data->has_fan & (1 << i)))
> + continue;
> + for (j = 0; j < files_fan; j++) {
> + err = device_create_file(dev,
> + &w83793_left_fan[(i - 5) * files_fan
> + + j].dev_attr);
> + if (err)
> + goto exit_remove;
> + }
> +
> + if (i >= 8 || !(data->has_pwm & (1 << i)))
> + continue;
> +
> + for (j = 0; j < files_pwm; j++) {
> + err = device_create_file(dev,
> + &w83793_left_pwm[(i - 3) * files_pwm
> + + j].dev_attr);
> + if (err)
> + goto exit_remove;
> + }
> + }
This is asking for trouble. Just make separate loops for fan and pwm,
there's no benefit in putting both in the same loop. And the code above
looks broken for pwm.
> +
> + data->class_dev = hwmon_device_register(dev);
> + if (IS_ERR(data->class_dev)) {
> + err = PTR_ERR(data->class_dev);
> + goto exit_remove;
> + }
> +
> + return 0;
> +
> + /* Unregister sysfs hooks */
> +
> +exit_remove:
> + for (i = 0; i < ARRAY_SIZE(w83793_sensor_attr_2); i++)
> + device_remove_file(dev, &w83793_sensor_attr_2[i].dev_attr);
> +
> + for (i = 0; i < ARRAY_SIZE(sda_single_files); i++)
> + device_remove_file(dev, &sda_single_files[i].dev_attr);
> +
> + for (i = 0; i < ARRAY_SIZE(w83793_left_fan); i++)
> + device_remove_file(dev, &w83793_left_fan[i].dev_attr);
left_pwm files aren't removed.
> +
> + if (data->lm75[0] != NULL) {
> + i2c_detach_client(data->lm75[0]);
> + kfree(data->lm75[0]);
> + }
> + if (data->lm75[1] != NULL) {
> + i2c_detach_client(data->lm75[1]);
> + kfree(data->lm75[1]);
> + }
> +detach_client:
> + i2c_detach_client(client);
> +free_mem:
> + kfree(data);
> +exit:
> + return err;
> +}
> +
> +static void w83793_update_nonvolatile(struct device *dev)
As you don't use dev in this function, maybe you could pass the
i2c_client directly to save a conversion?
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct w83793_data *data = i2c_get_clientdata(client);
> + int i, j;
> + /*
> + They are somewhat "stable" registers, and to update them everytime
> + takes so much time, it's just not worthy. Update them in a long
> + interval to avoid exception.
> + */
> + if (!(time_after(jiffies, data->last_nonvolatile + HZ * 300)
> + || !data->valid))
> + return;
> + /* update voltage limits */
> + for (i = 1; i < 3; i++) {
> + for (j = 0; j < ARRAY_SIZE(data->in); j++) {
> + data->in[j][i] =
> + w83793_read_value(client, W83793_REG_IN[j][i]);
> + }
> + data->in_low_bits[i] =
> + w83793_read_value(client, W83793_REG_IN_LOW_BITS[i]);
> + }
> +
> + for (i = 0; i < ARRAY_SIZE(data->fan_min); i++) {
> + /* Update the Fan measured value and limits */
> + if (!(data->has_fan & (1 << i))) {
> + continue;
> + }
> + data->fan_min[i] =
> + w83793_read_value(client, W83793_REG_FAN_MIN(i)) << 8;
> + data->fan_min[i] |=
> + w83793_read_value(client, W83793_REG_FAN_MIN(i) + 1);
> + }
> +
> + for (i = 0; i < ARRAY_SIZE(data->temp_fan_map); i++) {
> + data->temp_fan_map[i] =
> + w83793_read_value(client, W83793_REG_TEMP_FAN_MAP(i));
> + for (j = 1; j < 5; j++) {
> + data->temp[i][j] =
> + w83793_read_value(client, W83793_REG_TEMP[i][j]);
> + }
> + data->temp_cruise[i] =
> + w83793_read_value(client, W83793_REG_TEMP_CRUISE(i));
> + for (j = 0; j < 7; j++) {
> + data->sf2_pwm[i][j] =
> + w83793_read_value(client, W83793_REG_SF2_PWM(i, j));
> + data->sf2_temp[i][j] =
> + w83793_read_value(client,
> + W83793_REG_SF2_TEMP(i, j));
> + }
> + }
> +
> + for (i = 0; i < ARRAY_SIZE(data->temp_mode); i++)
> + data->temp_mode[i] =
> + w83793_read_value(client, W83793_REG_TEMP_MODE[i]);
> +
> + for (i = 0; i < ARRAY_SIZE(data->tolerance); i++) {
> + data->tolerance[i] =
> + w83793_read_value(client, W83793_REG_TEMP_TOL(i));
> + }
> +
> + for (i = 0; i < ARRAY_SIZE(data->pwm); i++) {
> + if (!(data->has_pwm & (1 << i)))
> + continue;
> + data->pwm[i][PWM_NONSTOP] =
> + w83793_read_value(client, W83793_REG_PWM(i, PWM_NONSTOP));
> + data->pwm[i][PWM_START] =
> + w83793_read_value(client, W83793_REG_PWM(i, PWM_START));
> + data->pwm_stop_time[i] =
> + w83793_read_value(client, W83793_REG_PWM_STOP_TIME(i));
> + }
> +
> + data->pwm_default = w83793_read_value(client, W83793_REG_PWM_DEFAULT);
> + data->pwm_enable = w83793_read_value(client, W83793_REG_PWM_ENABLE);
> + data->pwm_uptime = w83793_read_value(client, W83793_REG_PWM_UPTIME);
> + data->pwm_downtime = w83793_read_value(client, W83793_REG_PWM_DOWNTIME);
> + data->temp_critical =
> + w83793_read_value(client, W83793_REG_TEMP_CRITICAL);
> + data->beep_enable = w83793_read_value(client, W83793_REG_OVT_BEEP);
> +
> + for (i = 0; i < ARRAY_SIZE(data->beeps); i++) {
> + data->beeps[i] = w83793_read_value(client, W83793_REG_BEEP(i));
> + }
> +
> + data->last_nonvolatile = jiffies;
> +}
> +
> +static struct w83793_data *w83793_update_device(struct device *dev)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct w83793_data *data = i2c_get_clientdata(client);
> + int i;
> +
> + mutex_lock(&data->update_lock);
> +
> + if (!(time_after(jiffies, data->last_updated + HZ * 2)
> + || !data->valid))
> + goto END;
> +
> + /* Update the voltages measured value and limits */
> + for (i = 0; i < ARRAY_SIZE(data->in); i++)
> + data->in[i][IN_READ] =
> + w83793_read_value(client, W83793_REG_IN[i][IN_READ]);
> +
> + data->in_low_bits[IN_READ] =
> + w83793_read_value(client, W83793_REG_IN_LOW_BITS[IN_READ]);
> +
> + for (i = 0; i < ARRAY_SIZE(data->fan); i++) {
> + if (!(data->has_fan & (1 << i))) {
> + continue;
> + }
> + data->fan[i] =
> + w83793_read_value(client, W83793_REG_FAN(i)) << 8;
> + data->fan[i] |=
> + w83793_read_value(client, W83793_REG_FAN(i) + 1);
> + }
> +
> + for (i = 0; i < ARRAY_SIZE(data->temp); i++)
> + data->temp[i][TEMP_READ] =
> + w83793_read_value(client, W83793_REG_TEMP[i][TEMP_READ]);
> +
> + data->temp_low_bits =
> + w83793_read_value(client, W83793_REG_TEMP_LOW_BITS);
> +
> + for (i = 0; i < ARRAY_SIZE(data->pwm); i++) {
> + if (data->has_pwm & (1 << i))
> + data->pwm[i][PWM_DUTY] =
> + w83793_read_value(client,
> + W83793_REG_PWM(i, PWM_DUTY));
> + }
> +
> + for (i = 0; i < ARRAY_SIZE(data->alarms); i++)
> + data->alarms[i] =
> + w83793_read_value(client, W83793_REG_ALARM(i));
> + data->vid[0] = w83793_read_value(client, W83793_REG_VID_INA);
> + data->vid[1] = w83793_read_value(client, W83793_REG_VID_INB);
> + w83793_update_nonvolatile(dev);
> + data->last_updated = jiffies;
> + data->valid = 1;
> +
> +END:
> + mutex_unlock(&data->update_lock);
> + return data;
> +}
> +
> +/* ignore the possibility that somebody change bank outside the driver */
> +static u8 w83793_read_value(struct i2c_client *client, u16 reg)
> +{
> + struct w83793_data *data = i2c_get_clientdata(client);
> + u8 res = 0xff;
> + u8 new_bank = reg >> 8;
> +
> + mutex_lock(&data->lock);
> + new_bank |= data->bank & 0xfc;
> + if (data->bank != new_bank) {
> + if (i2c_smbus_write_byte_data
> + (client, W83793_REG_BANKSEL, new_bank) >= 0)
> + data->bank = new_bank;
> + else {
> + dev_err(&client->dev,
> + "set bank to %d failed, fall back"
> + " to bank %d, read reg 0x%x error\n",
Move the space at the end of the first half of the string.
> + new_bank, data->bank, reg);
> + res = 0x0; /* read 0x0 from the chip */
> + goto END;
> + }
> + }
> + res = i2c_smbus_read_byte_data(client, reg & 0xff);
> +END:
> + mutex_unlock(&data->lock);
> + return res;
> +}
> +
> +static int w83793_write_value(struct i2c_client *client, u16 reg, u16 value)
> +{
> + struct w83793_data *data = i2c_get_clientdata(client);
> + int res;
> + u8 new_bank = reg >> 8;
> +
> + mutex_lock(&data->lock);
> + new_bank |= data->bank & 0xfc;
> + if (data->bank != new_bank) {
> + if ((res = i2c_smbus_write_byte_data
> + (client, W83793_REG_BANKSEL, new_bank)) >= 0)
> + data->bank = new_bank;
> + else {
> + dev_err(&client->dev,
> + "set bank to %d failed, fall back"
> + " to bank %d, write reg 0x%x error\n",
Same here.
> + new_bank, data->bank, reg);
> + goto END;
> + }
> + }
> +
> + res = i2c_smbus_write_byte_data(client, reg & 0xff, value);
> +END:
> + mutex_unlock(&data->lock);
> + return res;
> +}
Looks to me like "value" is an u8 not u16.
> +
> +static int __init sensors_w83793_init(void)
> +{
> + return i2c_add_driver(&w83793_driver);
> +}
> +
> +static void __exit sensors_w83793_exit(void)
> +{
> + i2c_del_driver(&w83793_driver);
> +}
> +
> +MODULE_AUTHOR("Yuan Mu <ymu at winbond.com>");
Drop e-mail address.
> +MODULE_DESCRIPTION("w83793 driver");
> +MODULE_LICENSE("GPL");
> +
> +module_init(sensors_w83793_init);
> +module_exit(sensors_w83793_exit);
> diff -uprN linux-2.6.18-rc2/drivers/hwmon/Kconfig linux-2.6.18-rc2-patched/drivers/hwmon/Kconfig
> --- linux-2.6.18-rc2/drivers/hwmon/Kconfig 2006-08-24 17:45:20.593382000 +0200
> +++ linux-2.6.18-rc2-patched/drivers/hwmon/Kconfig 2006-08-24 17:46:07.996344500 +0200
> @@ -461,6 +461,15 @@ config SENSORS_W83792D
> This driver can also be built as a module. If so, the module
> will be called w83792d.
>
> +config SENSORS_W83793
> + tristate "Winbond W83793"
> + depends on HWMON && I2C && EXPERIMENTAL
> + help
> + If you say yes here you get support for the Winbond W83793 chip.
s/chip/hardware monitoring chip/
> +
> + This driver can also be built as a module. If so, the module
> + will be called w83793.
> +
> config SENSORS_W83L785TS
> tristate "Winbond W83L785TS-S"
> depends on HWMON && I2C && EXPERIMENTAL
> diff -uprN linux-2.6.18-rc2/drivers/hwmon/Makefile linux-2.6.18-rc2-patched/drivers/hwmon/Makefile
> --- linux-2.6.18-rc2/drivers/hwmon/Makefile 2006-08-24 17:45:20.601382500 +0200
> +++ linux-2.6.18-rc2-patched/drivers/hwmon/Makefile 2006-08-24 17:46:55.527315000 +0200
> @@ -9,6 +9,7 @@ obj-$(CONFIG_HWMON_VID) += hwmon-vid.o
> obj-$(CONFIG_SENSORS_ASB100) += asb100.o
> obj-$(CONFIG_SENSORS_W83627HF) += w83627hf.o
> obj-$(CONFIG_SENSORS_W83792D) += w83792d.o
> +obj-$(CONFIG_SENSORS_W83793) += w83793.o
> obj-$(CONFIG_SENSORS_W83781D) += w83781d.o
> obj-$(CONFIG_SENSORS_W83791D) += w83791d.o
>
It would be great if we could fix the driver quickly so that I can push
it in kernel 2.6.20.
Thanks,
--
Jean Delvare
