Hi ,
I have a problem to launch the sensors command.
I install the last ubuntu 6.10
The kernel is 2.6.17-10
My system is a fujitsu-siemens laptop model : L7320G
The version of lm-sensors I m using is 2.10.0
Here is the result of the lspci command :
00:00.0 Host bridge: VIA Technologies, Inc. P4M800CE Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. P4M800CE Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. P4M800CE Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. P4M800CE Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. P4M800CE Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:06.0 Ethernet controller: Atheros Communications, Inc. AR5005G
802.11abgNIC (rev 01)
00:0f.0 IDE interface: VIA Technologies, Inc. VIA VT6420 SATA RAID
Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge
[KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem
Controller (rev 80)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev
78)
01:00.0 VGA compatible controller: VIA Technologies, Inc. UniChrome Pro IGP
(rev 01)
Here is the result of the sensors-detect command :
# sensors-detect revision 1.413 (2006/01/19 20:28:00)
This program will help you determine which I2C/SMBus modules you need to
load to use lm_sensors most effectively. You need to have i2c and
lm_sensors installed before running this program.
Also, you need to be `root', or at least have access to the /dev/i2c-*
files, for most things.
If you have patched your kernel and have some drivers built in, you can
safely answer NO if asked to load some modules. In this case, things may
seem a bit confusing, but they will still work.
It is generally safe and recommended to accept the default answers to all
questions, unless you know what you're doing.
We can start with probing for (PCI) I2C or SMBus adapters.
You do not need any special privileges for this.
Do you want to probe now? (YES/no): YES
Probing for PCI bus adapters...
Use driver `i2c-viapro' for device 00:11.0: VIA Technologies VT8237 South
Bridge
Probe succesfully concluded.
We will now try to load each adapter module in turn.
Module `i2c-viapro' already loaded.
If you have undetectable or unsupported adapters, you can have them
scanned by manually loading the modules before running this script.
To continue, we need module `i2c-dev' to be loaded.
If it is built-in into your kernel, you can safely skip this.
i2c-dev is not loaded. Do you want to load it now? (YES/no): YES
Module loaded succesfully.
We are now going to do the adapter probings. Some adapters may hang halfway
through; we can't really help that. Also, some chips will be double
detected;
we choose the one with the highest confidence value in that case.
If you found that the adapter hung after probing a certain address, you can
specify that address to remain unprobed. That often
includes address 0x69 (clock chip).
Next adapter: SMBus Via Pro adapter at 4100
Do you want to scan it? (YES/no/selectively): YES
Client found at address 0x50
Probing for `SPD EEPROM'... Success!
(confidence 8, driver `eeprom')
Probing for `DDC monitor'... Failed!
Probing for `Maxim MAX6900'... Failed!
Client found at address 0x69
Client found at address 0x6e
Some chips are also accessible through the ISA bus. ISA probes are
typically a bit more dangerous, as we have to write to I/O ports to do
this. This is usually safe though.
Do you want to scan the ISA bus? (YES/no): YES
Probing for `National Semiconductor LM78'
Trying address 0x0290... Failed!
Probing for `National Semiconductor LM78-J'
Trying address 0x0290... Failed!
Probing for `National Semiconductor LM79'
Trying address 0x0290... Failed!
Probing for `Winbond W83781D'
Trying address 0x0290... Failed!
Probing for `Winbond W83782D'
Trying address 0x0290... Failed!
Probing for `Winbond W83627HF'
Trying address 0x0290... Failed!
Probing for `Winbond W83627EHF'
Trying address 0x0290... Failed!
Probing for `Silicon Integrated Systems SIS5595'
Trying general detect... Failed!
Probing for `VIA Technologies VT82C686 Integrated Sensors'
Trying general detect... Failed!
Probing for `VIA Technologies VT8231 Integrated Sensors'
Trying general detect... Failed!
Probing for `ITE IT8712F'
Trying address 0x0290... Failed!
Probing for `ITE IT8705F / SiS 950'
Trying address 0x0290... Failed!
Probing for `IPMI BMC KCS'
Trying address 0x0ca0... Failed!
Probing for `IPMI BMC SMIC'
Trying address 0x0ca8... Failed!
Some Super I/O chips may also contain sensors. Super I/O probes are
typically a bit more dangerous, as we have to write to I/O ports to do
this. This is usually safe though.
Do you want to scan for Super I/O sensors? (YES/no): YES
Probing for `ITE 8702F Super IO Sensors'
Failed! (skipping family)
Probing for `Nat. Semi. PC87351 Super IO Fan Sensors'
Failed! (skipping family)
Probing for `SMSC 47B27x Super IO Fan Sensors'
Failed! (skipping family)
Probing for `VT1211 Super IO Sensors'
Failed! (skipping family)
Probing for `Winbond W83627EHF/EHG Super IO Sensors'
Failed! (skipping family)
Do you want to scan for secondary Super I/O sensors? (YES/no): YES
Probing for `ITE 8702F Super IO Sensors'
Failed! (skipping family)
Probing for `Nat. Semi. PC87351 Super IO Fan Sensors'
Failed! (skipping family)
Probing for `SMSC 47B27x Super IO Fan Sensors'
Failed! (skipping family)
Probing for `VT1211 Super IO Sensors'
Failed! (skipping family)
Probing for `Winbond W83627EHF/EHG Super IO Sensors'
Failed! (skipping family)
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `eeprom' (should be inserted):
Detects correctly:
* Bus `SMBus Via Pro adapter at 4100'
Busdriver `i2c-viapro', I2C address 0x50
Chip `SPD EEPROM' (confidence: 8)
I will now generate the commands needed to load the I2C modules.
To make the sensors modules behave correctly, add these lines to
/etc/modules:
#----cut here----
# I2C adapter drivers
i2c-viapro
# I2C chip drivers
eeprom
#----cut here----
I put these lines in my /etc/module files
I loaded them and can see the 2 modules in lsmod
But when I launched sensors, I got this error message :
Can't access procfs/sysfs file
Unable to find i2c bus information;
For 2.6 kernels, make sure you have mounted sysfs and libsensors
was compiled with sysfs support!
For older kernels, make sure you have done 'modprobe i2c-proc'!
/sys is well mounted
I m not sure if I have the sysfs support in my kernel (I don't how to check
this) but I believed it should ok in the 2.6 kernel
Thanks for your help,
Regards
Mat
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20061101/c7cc7252/attachment.html
