Hi Guys, I have a ADT7475 on my board as well, I don't have much driver experience but I am making some headway... Going from this message: http://lists.lm-sensors.org/pipermail/lm-sensors/2006-September/017552.html I have since been able to get the CPU temperature working... adt7463-i2c-1-2e Adapter: SMBus nForce2 adapter at 1c40 V1.5: +0.000 V (min = +1.42 V, max = +1.58 V) VCore: +0.000 V (min = +0.00 V, max = +0.00 V) ALARM V3.3: +3.360 V (min = +3.13 V, max = +3.47 V) V5: +0.000 V (min = +4.74 V, max = +5.26 V) V12: +0.000 V (min = +11.38 V, max = +12.62 V) CPU_Fan: 0 RPM (min = 4000 RPM) ALARM fan2: 0 RPM (min = 0 RPM) fan3: 0 RPM (min = 0 RPM) fan4: 0 RPM (min = 0 RPM) CPU: +32.25 C (low = +10 C, high = +50 C) ALARM FAULT Board: +0.00 C (low = +10 C, high = +35 C) ALARM Remote: +0.00 C (low = +10 C, high = +35 C) ALARM FAULT CPU_PWM: 0 Fan2_PWM: 0 Fan3_PWM: 0 vid: +0.000 V (VRM Version 2.4) Change this below from register 0x25 to 0x77, 0x25 is the 8bit resolution and 0x77 is the 10bit.. #define LM85_REG_TEMP(nr) (0x77 + (nr)) This gives the correct CPU temperature (verified by bios)
