Hi all,
This patch contains 2 sets of fixes for the abituguru:
1) Much improved timeout handling, drasticly reducing the amount of
timeout errors on some motherboards
2) Fix the exit paths in the bank1 sensor type detect code to always
restore the original settings even on an error. Without this our
special test settings could remain seriously confusing the system
BIOS's setup menu.
Both are very much related and are must haves, to avoid messing up the
uguru CMOS settings.
Since this patch fixes the CMOS settings corruption* reported to the
list earlier by Sunil Kumar, it should be send upstream ASAP (to GKH who
is replacing Linus while Linus is away for a couple of weeks).
Regards,
Hans
* Which was luckily not as bad as it seems, it can be fixed by loading
the setup defaults in the BIOS, still not messing up these settings in
the first place is much much better!
-------------- next part --------------
A non-text attachment was scrubbed...
Name: hwmon-abituguru-timeout-fixes.patch
Type: text/x-patch
Size: 10780 bytes
Desc: not available
Url : http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20060810/488d34f1/attachment.bin
