Jean Delvare schrieb: > Hi Matthias, > > >>i have a strange problem with lm-sensors and the eeprom module. >>On my Tyan Mainboard (S5350) I get all values of the temperature and fan >>sensors, but the memory modules are not listed on the output of sensors. >> >>The problem is that in /sys/bus/i2c/drivers/eeprom for every memory >>module an entry exists and therefore the output of decode-dimms.pl >>delivers the correct informations about the memory. >> >>Thus I think there should be a problem with the sensors program or maybe >>with the config file. > > > No, this is a change we made on purpose. There is a note about that in > the CHANGES document for release 2.10.0: > > Library: NOTE: libsensors(3) will no longer see eeprom (SPD) chips > This is intentional. Use decode-dimms.pl if you still > need your memory SPD data. > > The rationale is that EEPROMs are not sensors, so they didn't belong to > libsensors in the first place. > Hi Jean, thank you, very much! I only found old documentation on the net and was wondering, why I get no values about the memory. But I think it is a good idea to move the memory information out of the sensors output. Best Regards Matthias Dettling
